Need Help?
Call or text
Show parts
Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.
This part is discontinued by the manufacturer and is no longer available for purchase.
Replaces cracked, dented, rusted, or split dishwasher front panel. Restores appearance and provides secure mounting for controls and components.
Color: Black
Color: White.
Black. 8-18 x 5/16 inch.
Usually ships within 4 - 14 days
White. 8-18 x 5/16 inch.
Bisque. 8-18 x 5/16 inch.
The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.
Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door.
Symptoms of a bad Hinge Arm Link include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Front door panel cover for dishwashers. This long decorative trim piece installs on the lower door section. Replace if cracked, discolored, or damaged.
Replaces the outer front door panel on your dishwasher. Order a new cover if your current panel is streaked, scratched, faded, or damaged.
Finished access panel for dishwasher front. Replaces cracked, rusted, or damaged panels. Restores clean appearance and protects internal components.
Covers the lower front service opening on your dishwasher. Replace if cracked, dented, scratched, or missing to restore a clean appearance.
White dishwasher access panel that covers the lower front. Replace if cracked, rusted, missing, or when converting your dishwasher to a different color.
Replacement 8-32 x 1/4 screw with HXP head for securing dishwasher panels, brackets, and assemblies. Replaces stripped, missing, or damaged screws.
Finished toe kick panel that covers the gap between your dishwasher and floor. Replace if cracked, scratched, rusted, or missing for a clean look.
Almond toe kick panel covers the dishwasher base opening beneath the door. Replaces rusted, cracked, or missing kickplates to restore appearance.
White lower front toe kick panel covers the dishwasher base opening. Replace your cracked, dented, corroded, or missing panel to restore a finished look.
Size: 10-16 ab.
Hex washer head screw secures panels, brackets, and internal components in dishwashers. Replace stripped, rusty, or missing fasteners to restore fit.
Right-hand hinge that secures and guides your dishwasher door for proper alignment and smooth opening. Replace if cracked, broken, or worn to restore stability.
Left side door hinge for dishwashers. Secures and guides the door for proper alignment and smooth operation. Replaces bent, broken, or worn hinges.
If your dishwasher won't start or the door won't lock, the door latch assembly is likely failed. DIY-friendly repair takes about 30 minutes to replace.
The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.
Symptoms of a faulty interlock switch include:
Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance.
This genuine GE switch is compatible with Hotpoint and RCA dryers as well.
Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.
Metal contact leaf for dishwasher switch assemblies. Replace if the original contact is bent, corroded, worn, or missing to restore proper circuit closure.
Protective heat shield that installs inside your dishwasher to guard internal wiring and components from heat and debris. Replace if cracked or missing.
Replaces the interior face of your dishwasher door. Ideal when the door liner is cracked, dented, melted, or visibly worn. Restores a clean surface.
Secure wire harnesses in your dishwasher with this harness clip. Replace if wires are loose or clip is broken. Verify fit with your model number.
Size: 8-32 x 5/8 inch.
Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.
If your dishes have spots or dry poorly, the rinse aid dispenser may be clogged or leaking. This tank assembly restores proper rinse aid delivery.
The GE screw is an OEM replacement part responsible for securing various components and parts of the dishwasher together. The screw is designed to provide a tight and secure connection for different panels, brackets, or other elements within the dishwasher. It plays a crucial role in maintaining the structural integrity of the appliance by preventing loose parts.
Common causes of a bad screw can include regular wear and tear from frequent use, exposure to moisture leading to corrosion, or damage from over-tightening. A compromised screw can result in loose or unstable components, which can affect the dishwasher's performance and safety.
Symptoms of a bad screw include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replacement door vent directs humid air out during the dry cycle. Install inside the door panel to replace a cracked, clogged, or missing vent.
Cushions and seals the dishwasher door vent to route steam safely while protecting the control area. Replace if worn, moldy, or causing leaks.
Secures the rinse aid dispenser tank in your dishwasher. Replace if the tank is loose, rattles, or detaches during cycles. Verify fit with your model.
Dispenser won't close or stay shut? This dishwasher detergent cup cover securely latches to prevent mid-cycle opening. Moderate DIY repair, 1 hour.
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
Size: 10-12 x 1/2 inch.
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
The Fill Cap Assembly is an OEM part for GE dishwashers. This assembly includes the cap that covers the opening where rinse aid or other additives are poured into the dishwasher. It ensures that the additives are securely contained and properly dispensed during the wash cycles, contributing to effective cleaning and drying.
Over time, the fill cap assembly can become damaged due to regular use, exposure to cleaning agents, or accidental mishandling. A compromised fill cap can lead to leaks or improper dispensing of rinse aid, affecting the dishwasher's performance.
Symptoms of a bad fill cap assembly include:
Replacement spring for dishwasher detergent cup door assembly. Provides tension to keep cup door latched closed. Replace if broken, stretched, or lost.
Seals dishwasher door to prevent leaks during wash cycles. Replace if worn, torn, or causing water leakage. Press-fit installation, no glue needed.
Fix a dishwasher that won't advance through cycles or gets stuck mid-wash with this timer cam. Regulates wash cycle timing via internal camshaft design.
Detergent cup not opening during wash cycle? This actuator lever connects the timer to the dispenser lid. Moderate DIY repair, about 35 minutes.
This escutcheon/insert assembly is a finished trim piece that restores the control panel opening and improves the appliance's appearance while protecting internal components from dirt and moisture. It provides a neat, factory look for damaged or missing trim. What it does
Trim panel that covers the dishwasher control area. Replace if cracked, broken, or discolored to restore a clean, finished appearance.
This graphic and insert assembly replaces the worn or damaged control panel overlay to restore legible labels and the panel's original appearance. It helps make controls easier to read and improves the look of the appliance. What it does:
This dishwasher timer controls the sequence and duration of each cycle step. Replacing a worn timer restores proper cycle advancement so the unit fills, washes, drains, and dries at the right time.
This pushbutton is a replacement momentary control button for appliance control panels, restoring reliable tactile input for cycle selection and start functions. It keeps your appliance responsive when the original button is broken, stuck, or unresponsive. What it does
Replace a broken, cracked, or missing control panel button on your dishwasher. This pushbutton installs on the front control panel for cycle selection.
Replacement pushbutton for dishwasher control panel. Installs on the front console to operate cycle selections. Order if your button is cracked or missing.
Replace your dishwasher's cracked, worn, or missing timer knob. This dial control knob installs on the control panel for setting wash cycles and time.
Replace your dishwasher's worn, cracked, or missing timer control knob. Restores secure grip and clear position settings for easy cycle selection.
Replace your dishwasher's worn, broken, or missing timer knob. Attaches to the timer shaft on the control panel to select and advance wash cycles.
Insulating switch cover for dishwashers. Protects electrical switch components from moisture and heat. Replace if cracked, broken, or missing.
Includes 12 terminals.
Includes 12 screws.
Replace your dishwasher's door latch handle knob if it's cracked, broken, or missing. This control knob secures the door latch mechanism for proper closure.
Secures control or selector knobs on your dishwasher. Replace if the latch is broken, cracked, or missing, causing knobs to slip or pop off the panel.
Secures control knobs to the dishwasher control shaft. Replace this latch if your knob is loose, wobbling, or won't stay engaged on the shaft properly.