Parts for Ge GCE23LBYDFBB: 06 - Fresh Food Section Parts

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

White plastic clip that secures the rear of refrigerator shelves or drawer rails to the cabinet wall. Replace if cracked, broken, or missing.

Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.

Air return grille installs at the bottom of the fresh food compartment behind the drawers. Replace if cracked, broken, or missing after cleaning.

Plastic cover that protects the damper assembly inlet/discharge area in your refrigerator. Replace if cracked, broken, or tabs are damaged.

Secures refrigerator panels, brackets, and trim. Replace if screw is stripped, missing, or no longer holds components tightly in place.

Rubber grommet secures the base grille on your refrigerator. Replace if cracked, worn, or missing to restore a snug fit and reduce vibration or rattle.

Protective grille cover that mounts over the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor.

The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.

Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.

Symptoms of a bad Temperature Sensor Seal include:

• Inaccurate temperature readings.
• Condensation or frost near the sensor location.
• Frequent cycling or unusual patterns in the refrigerator's cooling process.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replaces cracked or missing light shield and housing in your refrigerator's fresh food compartment. Restores proper illumination and protects bulb. Verify fit.

Replace your worn or broken refrigerator bottom hinge pin. Supports the door and serves as the lower pivot point on the bottom hinge assembly.

Directs airflow from evaporator through the fresh food compartment. Replace if cracked, broken, or missing to restore proper air distribution.

Refrigerator freezing food? A faulty damper assembly causes constant cold air flow to the fresh food section. DIY-friendly repair, under 1 hour.

The Bulb Light is an OEM part for GE refrigerators. It is designed to illuminate the interior of the refrigerator and freezer compartments, making it easier to see and access food items. This light bulb fits securely into the designated socket and provides bright, reliable lighting to enhance visibility.

You should replace the bulb light if it burns out or becomes damaged. Causes of a bad bulb light can include regular wear and tear, electrical issues, or physical damage from impacts or vibrations. A faulty bulb can leave the refrigerator compartments dim or completely dark, making it difficult to find items.

Symptoms of a bad bulb light include:

• The light not turning on when the refrigerator door is opened
• Flickering or intermittent lighting
• A visibly burned-out or broken bulb

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the refrigerator door to the cabinet and provides a stable pivot point. Replace if cracked, broken, or causing door misalignment or sagging.

White plastic hinge cover for refrigerator fresh food compartment. Replaces cracked, broken, or missing hinge caps. Snaps onto door hinge.

Black plastic hinge cover for refrigerator doors. Replaces cracked, broken, or missing covers that expose the hinge mechanism. Snaps into place.

Bottom door hinge for refrigerators. Mounts the lower door to the cabinet frame. Replace if cracked, bent, or causing door misalignment issues.

Bottom door hinge for side-by-side refrigerators. Replaces worn, cracked, or broken hinges causing door misalignment or sagging. Direct fit.

Wire harness assembly for refrigerator freezer compartment lighting. Replace if wires are frayed, connections are loose, or harness is damaged or missing.

Mounting screw for dryers, refrigerators, and side-by-side units. Replaces lost, stripped, or damaged screws during appliance repairs or maintenance.

Replaces cracked or missing light shield and housing in your refrigerator's fresh food compartment. Restores proper illumination and protects bulb. Verify fit.

Replace your refrigerator's light lens cover to restore proper illumination. Install when cracked, yellowed, or missing. Verify fit with your model number.

Uneven cooling in your fridge? This inlet cover assembly directs airflow into the fresh food compartment, fixing cracked covers that disrupt air circulation.

Replacement mounting screw for refrigerator brackets, panels, and handles. Restores secure fit when original fastener is missing, stripped, or damaged.

Hex head screw for refrigerator panels, brackets, and assemblies. Replaces missing, stripped, or rusted fasteners to secure components properly.

Fix interior lights that won't turn on, stay on constantly, or delay when opening the door. This switch replacement takes 10-15 minutes with basic tools.

Replaces broken or cracked fresh food door lever assembly on side-by-side refrigerators. Installs with a Phillips screwdriver and pliers in minutes.

The Fresh Food Lever Assembly is an OEM part for GE refrigerators. It plays a crucial role in the operation of the refrigerator, enabling the smooth adjustment of settings within the fresh food compartment. This lever assembly is responsible for the user's ability to fine-tune the temperature and humidity levels, ensuring that the food stored inside remains fresh and well-preserved. For the same part in white, purchase WR11X10007.

Over time, the lever assembly may become worn or damaged due to regular use, accidental impacts, or environmental factors such as extreme temperatures or humidity.

Symptoms of a bad Fresh Food Lever Assembly include:

• Difficulty in adjusting the temperature or humidity settings.
• The lever becoming loose or unresponsive.
• Inconsistent temperature control within the fresh food compartment.
• Increased energy consumption as the refrigerator works harder to maintain settings.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.

Molded duct assembly directs cold air from freezer to fresh-food section. Replace if cracked, broken, or damaged to restore proper airflow balance.