Parts for Mtd Pro 12AKC31E095 / 2013: General Assembly Parts

21-inch 3-in-1 mower deck for walk-behind mowers. Replace your cracked, damaged, or rusted deck housing to restore your mower's cutting platform.

Hex head screw fastener for walk-behind lawn mowers. Secures components and housing parts. Replace if stripped, rusted, or missing for proper assembly.

Square nut fastener for walk-behind lawn mowers. Secures components and housing panels. Replace if stripped, corroded, or missing during maintenance.

Lower handle for push lawn mowers. Connects the upper handle to the mower deck. Replace when bolt holes are damaged, handle is bent, or cracked.

Carriage screw that secures various components on lawn mowers and snowblowers. Replace if your screw is stripped, loose, missing, or damaged during use.

Blade adapter assembly for walk-behind mowers. Connects the cutting blade to the engine crankshaft. Replace if cracked, stripped, or worn for secure blade mounting.

Replaces worn, dull, or damaged 21-inch mulching blades on walk-behind mowers. Features curved design for effective mulching. Upgrade your rusty blade.

Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

Attaches to the back of your walk-behind mower deck to prevent grass and debris from reaching the operator. Replace if cracked, broken, or missing.

Replacement grass bag that attaches to the rear of your walk-behind mower to collect clippings and debris. Needed when original is torn, cracked, or missing.

Collects grass clippings and debris during mowing. Replace your walk-behind mower's baffle bag if torn, cracked, or missing to restore proper collection.

Hex washer screw for gas walk-behind and self-propelled mowers. Secures components during operation. Replace if stripped, rusted, or missing.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Wing knob for lawn mowers and snow blowers. Secures chutes, bagger frames, and adjustable components. Replace if cracked, broken, or missing.

Mower won't roll or wheels wobble? This rear axle holds wheels securely in place. Suitable for self-propelled and gas walk-behind mowers.

This spur gear is a genuine MTD part. It is made for use with self-propelled lawnmowers. A spur gear is a toothed gear that functions to transfer motion as well as control torque, power, and speed. This is a ten-tooth gear that is attached to the rear axle. It works with the rear wheel to steer and drive the mower.This spur gear is a genuine OEM part sourced directly from the manufacturer and is sold individually. The rear wheel requires two spur gears, so be sure to order accordingly. Typically these gears are quite durable, though they may need to be replaced due to more extreme wear and tear from heavy use. It is an easy repair that can be undertaken in less than half an hour.This spur gear is manufactured for compatibility with Black Max, Craftsman, Cub Cadet, MTD Pro, and Troy-Bilt lawnmowers manufactured between 2012 and 2015. For complete compatibility information, please use the compatibility checker before purchasing.

This genuine replacement part is an extension spring for use with a self-propelled lawn mower. This part is essential to the proper operation of the lawn mower. This part is an identical replacement for an original carrier extension spring that is damaged, faulty, or missing. If the lawn mower blades won't turn, the most common reason is a faulty extension spring. The extension spring attaches to the idler arm and the spring return hook. The purpose of this part is to apply tension on the guard, allowing it to retract.This OEM replacement part is sourced directly from the manufacturer, and is sold individually. This part is made of high quality metal. For installation information, please refer to the original product manual and follow all safety precautions. Pliers are required for proper installation of this part. This part is compatible with a variety of MTD, Troy-Bilt, Craftsman, Yard Man, Columbia, Craftsman, and White Outdoor lawn mowers.Please note: original part numbers 2394165, 732-04826 are now obsolete, and manufacturer has replaced the original part numbers with this part.

Mower won't move forward or backward? This transmission assembly controls drive engagement and wheel movement. Moderate difficulty repair for walk-behind models.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

Replacement tire and rim assembly for lawn mowers and snowblowers. Installs as a complete wheel unit. Replace if tire is worn, cracked, or rim is bent.

Upper handle for walk-behind mowers. Installs at the top of the mower frame to provide operator control. Replace if cracked, bent, or damaged.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Rope guide eyebolt for lawn mower recoil starters. Guides the starter rope smoothly during pull starts. Replace if bent, broken, or missing.

Mower won't self-propel or speed control not working? This drive cable connects the control lever to the transmission. Simple DIY fix for most users.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This is a shoulder screw that is used to secure the handles of yard equipment. Typically, this screw is used with a matching wing nut, which is sold separately. Many different varieties of push lawn mowers have handles that fold downward for ease of storage. This is one of the locations on a mower where one will find shoulder bolts and the point at which these bolts are most likely wear out. While they are made of durable machined metal, shoulder bolts receive a great deal of wear, particularly from the handles being raised and lowered each time the mower is used. When pushing down on the mower to clear wet grass clippings or to make sharp turns with the mower, the entire weight of the mower is put on the two shoulder screws where they intersect. Since the metal of the handles can turn at that juncture, extra shearing action is put on the shoulder bolts, which can wear out. It is actually advantageous that the bolts wear out since otherwise, the handles themselves would warp and break apart. These OEM genuine replacement parts fit a number of different lawn and garden machines, including many made by Cub Cadets, Husky, Troy-Bilt, Craftsman, Yard-Man, Bolens, MTD, and Yard-Machines.

Replace a missing, stripped, or damaged shoulder screw on your lawn mower or tractor. This fastener secures components and maintains proper alignment.

Replace your missing or damaged 8-inch grey wheel hubcap on walk-behind mowers. Covers the wheel hub for a finished appearance and protection.

This dust cover is a genuine MTD part, sold individually. This dust cover can be used as a replacement part in a lawn mower. The purpose of the dust cover is to prevent the wheels of the lawn mower from accumulating too much dirt, debris, pebbles, and dust.The dust cover in a lawn mower might have to be replaced if it can no longer prevent the accumulation of external materials and gunk inside the wheels. If the dust cover has been punctured, cracked, dented, warped, eroded, or otherwise damaged, the dust cover should be removed and replaced by this genuine OEM replacement part in order to continue safe use of the lawn mower.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This dust cover is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Troy-Bilt.

Side discharge chute for walk-behind mowers. Directs grass clippings away from mower deck. Replace if cracked, broken, or missing to prevent clogging.

Replace a broken torsion spring causing handle slack or engagement issues on your lawn mower. Common DIY repair restores proper tension and operation.

Hinge pin fastener for lawn mowers. Secures moving components and panels. Replace if bent, missing, or damaged to restore proper attachment and function.

Secures the chute deflector on your walk-behind mower. Replace this bracket if cracked, broken, or missing to properly mount the deflector guard.

This replacement part is a screw. This is a genuine replacement part made by MTD. A screw is a small part but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts in place and secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear or an isolated incident. Screws endure friction over time and can become worn down.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Hex washer head screw for lawn mowers and snow blowers. Replace worn, stripped, or missing fasteners on deck, housing, or engine components.

Fix lawn mower vibration or loose components with this block bushing. Facilitates smooth rotational movement and secures internal machinery. Easy DIY fix.

Upper control housing for walk-behind mowers. Installs on the handle assembly. Replace if cracked, broken, or damaged. Secures control mechanisms.

Lower control housing for walk-behind mowers. Mounts to the handle assembly to protect internal control mechanisms. Replace if cracked, broken, or missing.

Replace a broken deck wash nozzle that prevents proper mower deck cleaning. Compatible with walk-behind, self-propelled, and riding mowers. Simple install.

Replace a missing, stripped, or damaged shoulder screw on your lawn mower or tractor. This fastener secures components and maintains proper alignment.

Nozzle adapter for lawn tractors and riding mowers. Connects hoses or tubes in the fuel or deck wash system. Replace if cracked, stripped, or missing.