Glass Top Or Cook Top

The Cooktop is an OEM part for Whirlpool ranges. It is the glass surface that is used for warming and cooking food. This cooktop features multiple warming zones with varying heat levels to accommodate different types of cooking needs. It has a smooth glass design that is easy to clean.

Causes can be general wear and tear from frequent use. Accidental impacts or stresses from heavy cookware can also damage the cooktop.

Symptoms of a bad cooktop include:

• Zones not heating up properly or uneven heating
• Cracks or breaks in the glass surface
• Dirty burners that leave residue
• Warping or discoloration of the glass over time

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replaces cracked, chipped, or damaged glass cooktop surface. Restores safe, level cooking area and clean factory appearance. Direct fit main top panel.

Glass main top assembly for cooktops. Provides the cooking surface where pots and pans rest. Replace if cracked, chipped, warped, or shattered.

Glass cooktop panel that serves as the cooking surface on electric ranges. Replace if cracked, chipped, broken, or structurally compromised.

Replace your cracked, chipped, or broken cooktop glass top. This main surface panel seals the stovetop and supports burners for safe operation.

This is the replacement cooktop, also called the main top, for sealed-burner gas units. It forms the cooking surface around the burners to contain spills, restore appearance, and keep grates and burner parts seated securely for safe, even heating.

• Forms the main cooking surface and supports burner heads/caps and grates
• Sealed-burner design helps keep spills on top, protecting components below
• Maintains proper burner alignment and flame pattern
• Common symptoms: cracks, chips, dents, rust, or warping; wobbly grates or gaps around burner openings

• Disconnect power and shut off the gas supply before servicing
• Remove grates, burner caps, and the screws securing burner heads; lift off the old top
• Transfer/reconnect igniters and wiring as equipped; avoid pinching wires during reassembly
• Restore gas and power, verify ignition on all burners, and check for leaks

Replacement glass top for cooktops. Installs as the main cooking surface. Order if your existing glass is cracked, shattered, or broken from impact.

This is the smooth ceramic glass cooktop surface. It provides the cooking surface for the range, supporting the radiant elements and offering a durable, easy-to-clean top.

• Forms the flat cooking surface above the radiant elements
• Damage can cause cracks, chips, or hot spots on burners
• Replacing helps restore safe, even heating and a clean appearance
• Use care: glass can shatter if struck or overtightened during install

• Disconnect power before servicing; glass edges are sharp
• Remove control knobs and lift/transfer any brackets per IPL
• Handle glass with two hands; avoid flexing or setting face-down on hard surfaces
• Reuse original screws/brackets and gasket if service manual specifies; align carefully to avoid stress cracks

Replace your cracked or broken electric range glass cooktop. This black glass surface installs on top of your range to restore appearance and function.

Glass cooktop surface for ranges. Replaces cracked, chipped, or broken cooktops. Provides a flat cooking surface for burners. Essential repair part.

Replacement glass surface panel for cooktops. Restores the smooth cooking surface when cracked, chipped, or broken. Protects internal components.

This cooktop is the appliance's main top surface. It restores a safe, level, easy-to-clean work area when the original top is damaged, helping your range or cooktop look and function as intended.

• Provides the upper surface that supports and aligns burners or heating elements
• Helps contain spills and protects internal components from moisture and debris
• Restores proper fit, finish, and stability when the original top is cracked or warped
• Typical replacement symptoms: visible cracks, chips, stains that won't clean, or broken mounting points

• Disconnect power at the breaker; shut off gas supply before servicing
• Handle carefully; edges and surfaces can be fragile—use gloves and a protective surface
• Transfer any components from the original top to the new part, noting positions and wire routing as applicable
• Test operation before returning to service

The Range Maintop Glass Assembly is an OEM component specifically designed for GE electric ranges. It consists of tempered glass precisely cut and treated to withstand high heat. This assembly serves as the durable cooking surface of the range.

Symptoms of a bad maintop glass assembly include:

• Improper heating or hot or cool spots on the glass surface
• Glare or visibility issues looking through the glass  
• The glass making popping or cracking sounds during heating
• Difficulty keeping the surface clean despite regular cleaning

Causes of failure can be fatigue from repeated heating and cooling cycles, accidents like dropped cookware, or flaws in the glass. Over time, everyday use puts stress on the material that will eventually cause damage.

This genuine OEM GE part is compatible with Hotpoint, RCA and select Kenmore ranges. 

Replace your range's glass cooktop frame assembly when the surface is cracked, broken, or damaged. Includes black glass cooktop with frame foundation.

Replacement glass surface assembly for your cooktop. Installs on top of the burner box. Needed when the original glass is cracked, broken, or damaged.

Replaces cracked, broken, or scratched glass cooktop surface on electric ranges. Provides the flat cooking area and restores appearance and fit.