Parts for Mtd 31AH6ZFH500: Handle Panel Assembly Parts

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

Replace broken or unresponsive snow blower control lever that prevents power engagement. Essential for operating your snow thrower safely and effectively.

Right-side handle assembly for gas snowblowers. Replace if your original handle is cracked, bent, broken, or missing. Mounts to the frame for operator control.

Fastening screw for snowblower component assembly. Replaces lost, stripped, or damaged screws that secure panels, covers, or internal parts.

Replace missing or damaged socket screws in your snowblower. Fastens components securely. Often lost during maintenance or repair work.

Replaces a damaged, stripped, or missing oval screw on your lawn tractor or outdoor power equipment. Used to secure covers, panels, and components.

Pivot rod for gas snow throwers. Connects control lever to moving components. Replace if bent, broken, or worn to restore proper mechanical operation.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Hex nut with thread-locking patch for snow thrower assembly. Secures components throughout the machine. Replace if stripped, missing, or damaged.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

Replacement shift knob for snowblower control lever. Installs on the shift rod to adjust speed and direction. Replace if cracked, broken, or missing.

Replacement light bulb for snow throwers and lawn mowers. Replace when bulb burns out or provides dim lighting. Confirm fit with your model number.

Light harness assembly for gas snowblowers. Replace if headlights flicker, fail to illuminate, or wiring is damaged. Confirm fit with your model number.

Light socket for lawn tractors and outdoor power equipment. Replace when socket is cracked, corroded, or bulb won't stay secure. Verify fit with your model.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This part is a replacement lock plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective lock plate on snowblowers. This lock plate works by locking the auger handle securely into position when the user is adjusting the snowblower chute. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. Proper tools may be required to install this part. For more accurate information on how and where to install this lock plate, the appropriate owner's manual and equipment diagrams should be referenced. This lock plate is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with snowblowers that have been manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, Husky, and Troy-Bilt.

Snowblower won't engage or auger slips during operation? This cam clutch lock secures the drive mechanism. Common repair for engagement issues.

Clutch lock spring for gas snowblowers. Secures the clutch mechanism in position. Replace if spring is stretched, broken, or missing to restore proper function.

Shoulder screw fastener for gas snowblowers. Secures components with precise spacing. Replace if threads are stripped, head is damaged, or screw is missing.

Shoulder screw for gas snowblowers and walk-behind mowers. Replace this fastener if worn, stripped, or missing to secure moving components properly.

Speed selector control cable connects the speed lever to the ground drive system on snowblowers. Replace if cable is frayed, broken, or kinked.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Carriage bolt for lawn mowers, snow blowers, tillers, and edgers. Works with a nut to secure metal components. Replace if worn, stripped, or missing.

E-ring retaining clip for snowblower assemblies. Secures pins and shafts in place. Replace if bent, missing, or worn to restore proper retention.

Steering trigger handle for gas snowblowers. Mounts on handlebar to control steering mechanism. Replace if cracked, broken, or missing for proper control.

This trigger is a genuine MTD part that can be used as a replacement part for a snowblower operated by power steering. The trigger is located under the handlebars of a snowblower and functions as a crucial feature of the appliance's power steering capabilities. The trigger is connected to the tires through a network of cables through the engine, allowing effortless turning capabilities, even on tough, sharp turns. A trigger might have to be replaced if its material shows signs of deterioration, including bending, cracking, tearing, or melting. This deterioration can be attributed to general overuse or long-term exposure. If a trigger is subject to any of this kind of damage, it is best to replace it before using the snowblower, as the malfunctioning trigger might affect the power steering capabilities of the snowblower, creating an unsafe work environment and the possibility of permanent or unnecessarily extensive damage. Always wear gloves when handling, repairing, and operating outdoor equipment. This trigger is compatible with the brands MTD, Troy-Bilt, Yard Machines, and Cub Cadet.

Steering trigger pin for snowblowers. Secures the steering trigger mechanism. Replace if pin is bent, sheared, or missing to restore proper control.

Handle panel assembly for gas snowblowers. Mounts to control area of machine. Replace if cracked, broken, or damaged from impact or wear.

Snowblower headlight lens protects the bulb and ensures visibility during low-light operation. Replace when cracked or clouded. Verify fit with model.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.