Husqvarna Trimmer

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.

Transfers power and increases torque in gas and grass line trimmers. Replace if you notice excessive vibration, grinding noises, or gear slippage. Confirm fit with your model number before ordering.

This is a replacement carburetor for Husqvarna string trimmers and is also used on some Craftsman models. It consists of an aluminum body with a bright blue choke and cherry red primer bulb. Engines rely on a mixture of fuel and air for proper operation. In a small engine, the fuel and air mix inside the carburetor. This is achieved with a series of small channels, which release a fine mist of fuel into a vortex of air. When one of these channels gets clogged, it can negatively impact engine performance. Carburetors can often be cleaned with a commercial carburetor cleaning spray, but this is sometimes not sufficient to clean a badly clogged carburetor. In this case, other measures such as hypersonic cleaners can often be effective, but they’re not always worth the cost. The alternative is replacing the entire carburetor, which can be done using this kit. This is an OEM part sourced directly from the manufacturer, and it is sold individually. A heat shield is also included with the kit.

Fix fuel leaks and engine starting problems with this fuel line fitting. Connects separated fuel line sections on trimmers, blowers, and chainsaws.

Blocks dirt and debris from entering your trimmer engine. Replace when clogged or worn to restore proper airflow and prevent rough running or starting issues.

Delivers fuel from tank to carburetor in trimmers, blowers, and chainsaws. Replace if cracked, stiff, or leaking to restore proper fuel flow.

This is a genuine replacement wheel for select push mowers. The wheels assist with maneuvering the Lawn Mower and keeping the mower deck from coming in contact with the ground. On select models, the wheels are what offer a cutting height adjustment so that the grass can be cut to the appropriate length. Wheels can be damaged or become worn with regular use, necessitating a replacement. This wheel can provide the appropriate manufacturer part for compatible machines. Those who need to replace multiple wheels will have to order this part in multiple quantities. This genuine OEM replacement wheel is designed to be compatible with select lawn equipment from Husqvarna and Weed Eater. The wheel is made of durable composite plastic and sold as an individual piece. The washer and axle bolt required to secure the wheel will need to be purchased separately. This part can be replaced with a wrench and should only take a few minutes to repair. Always wear gloves when working on lawn equipment.

Engine won't engage when pulling starter rope? The starter pawl bridge connects the flywheel to spin your trimmer's engine. Easy DIY repair.

This mow ball assembly is used in many Husqvarna string trimmers to offer a height guide that prevents the trimmers from cutting grass or other foliage too low. This is an entire assembly that includes the ball bearing, plastic housing, and retaining ring needed to replace the mow ball. The bolt that is used to attach the part to the string trimmers is available separately. If the mow ball assembly is broken or damaged, the guide for the blade will not function and the trimmer may cut the grass too close to the ground. The first step to replace this part is unbolting the assembly using the bottom bolt located on the shaft of the cutter. Clean all the parts before greasing the adjustment button to make it easy to move. Take off the mow ball assembly and replace it with a new one.This part is sold as an individual unit. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The mow ball assembly is compatible with string trimmers manufactured by Husqvarna.

Replacement piston and cylinder kit for string trimmers. Restores engine seal and compression. Needed when original is worn, scored, or damaged.

Plastic choke lever for gas line trimmers and edgers. Actuates the choke valve to limit airflow during cold starts. Replace if cracked, broken, or damaged.

Handle knob for lawn mowers, snowblowers, and trimmers. Attaches to upper or lower handle adjustment levers. Replace when cracked, broken, or missing.