Parts for Craftsman 247378330: Lawn Mower Parts

Protective hubcap for lawn mower wheels. Snaps onto wheel center to shield the axle and wheel frame from dirt and damage. Replace if cracked or missing.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Carriage screw that secures various components on lawn mowers and snowblowers. Replace if your screw is stripped, loose, missing, or damaged during use.

Rope guide eyebolt for lawn mower recoil starters. Guides the starter rope smoothly during pull starts. Replace if bent, broken, or missing.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

Wing knob secures the handles on walk-behind push mowers. Replace if your knob is cracked, broken, stripped, or missing to properly fasten handles.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This is a shoulder screw that is used to secure the handles of yard equipment. Typically, this screw is used with a matching wing nut, which is sold separately. Many different varieties of push lawn mowers have handles that fold downward for ease of storage. This is one of the locations on a mower where one will find shoulder bolts and the point at which these bolts are most likely wear out. While they are made of durable machined metal, shoulder bolts receive a great deal of wear, particularly from the handles being raised and lowered each time the mower is used. When pushing down on the mower to clear wet grass clippings or to make sharp turns with the mower, the entire weight of the mower is put on the two shoulder screws where they intersect. Since the metal of the handles can turn at that juncture, extra shearing action is put on the shoulder bolts, which can wear out. It is actually advantageous that the bolts wear out since otherwise, the handles themselves would warp and break apart. These OEM genuine replacement parts fit a number of different lawn and garden machines, including many made by Cub Cadets, Husky, Troy-Bilt, Craftsman, Yard-Man, Bolens, MTD, and Yard-Machines.

Height adjustment knob for lawn mowers. Controls cutting height settings. Replace if cracked, broken, or missing to restore deck height control.

Lower control housing for walk-behind mowers. Mounts to the handle assembly to protect internal control mechanisms. Replace if cracked, broken, or missing.

Blade adapter assembly for walk-behind mowers. Connects the cutting blade to the engine crankshaft. Replace if cracked, stripped, or worn for secure blade mounting.

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.

Collects grass clippings and debris during mowing. Replace your walk-behind mower's baffle bag if torn, cracked, or missing to restore proper collection.

Square nut fastener for walk-behind lawn mowers. Secures components and housing panels. Replace if stripped, corroded, or missing during maintenance.

Attaches to the back of your walk-behind mower deck to prevent grass and debris from reaching the operator. Replace if cracked, broken, or missing.

Replace your worn or damaged 21-inch mower deck assembly. This 3-in-1 deck housing is the main structural component where the blade mounts and grass collects.

Hinged mulch plug assembly for walk-behind lawn mowers. Replaces worn or broken mulch covers. Includes metal hinge. Installs in place of discharge chute.

This replacement part is a screw. This is a genuine replacement part made by MTD. A screw is a small part but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts in place and secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear or an isolated incident. Screws endure friction over time and can become worn down.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Replace your lawn mower's side discharge chute if it's cracked, broken, or missing. Attaches to the side of the mower to direct grass clippings away.

Secures the chute deflector on your walk-behind mower. Replace this bracket if cracked, broken, or missing to properly mount the deflector guard.

Replace a broken torsion spring causing handle slack or engagement issues on your lawn mower. Common DIY repair restores proper tension and operation.

Hinge pin fastener for lawn mowers. Secures moving components and panels. Replace if bent, missing, or damaged to restore proper attachment and function.

Nozzle adapter for lawn tractors and riding mowers. Connects hoses or tubes in the fuel or deck wash system. Replace if cracked, stripped, or missing.

Fastening screw for lawn mowers and tractors. Secures components throughout the equipment. Replace if stripped, broken, or missing during repairs.

This is a self-tapping screw. It attaches to various lawn machines' engines. The exact location depends on the make and model of the device. With age or misuse of the lawn equipment, the self-tapping screw may become damaged or break. One sign that the screw is gone or broken is a loose connection between the engine and the foundation that it sets on. Excessive vibration is another indicator that the self-tapping screw is missing or damaged. If it does wear out and get lost or damaged, the part must be replaced.It is easy to replace a self-tapping screw. First, make sure that the device is cooled. Wear gloves for protection. It requires a wrench to install. If the self-tapping screw breaks, other tools such as pliers may be needed to get the screw out.The self-tapping screw is a genuine OEM part supplied by the manufacturer. It is made of durable metal. The self-tapping screw is sold individually. It is compatible with machines produced by Troy-Bilt, Bolens, Yard-Man, Yard Machines, Cub Cadet, and Husky. It is used in a variety of lawn tractors, lawnmowers, and other lawn equipment engines.

Hex head screw fastener for walk-behind lawn mowers. Secures components and housing parts. Replace if stripped, rusted, or missing for proper assembly.

Fix mower drive system issues with this 9-tooth spur gear. Restores self-propelled function when gears are worn or stripped. Direct replacement part.

Engine baffle assembly seals the cylinder area to maintain proper air flow and cooling. Replace if cracked, warped, or missing. Verify fit with your model.

Hex washer screw for gas walk-behind and self-propelled mowers. Secures components during operation. Replace if stripped, rusted, or missing.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This genuine replacement part is an extension spring for use with a self-propelled lawn mower. This part is essential to the proper operation of the lawn mower. This part is an identical replacement for an original carrier extension spring that is damaged, faulty, or missing. If the lawn mower blades won't turn, the most common reason is a faulty extension spring. The extension spring attaches to the idler arm and the spring return hook. The purpose of this part is to apply tension on the guard, allowing it to retract.This OEM replacement part is sourced directly from the manufacturer, and is sold individually. This part is made of high quality metal. For installation information, please refer to the original product manual and follow all safety precautions. Pliers are required for proper installation of this part. This part is compatible with a variety of MTD, Troy-Bilt, Craftsman, Yard Man, Columbia, Craftsman, and White Outdoor lawn mowers.Please note: original part numbers 2394165, 732-04826 are now obsolete, and manufacturer has replaced the original part numbers with this part.

Fix lawn mower vibration or loose components with this block bushing. Facilitates smooth rotational movement and secures internal machinery. Easy DIY fix.

Mounting bracket for walk-behind mowers. Secures and connects components within the mower assembly. Replace if cracked, bent, or broken during use.

Mower won't move forward or backward? This transmission assembly controls drive engagement and wheel movement. Moderate difficulty repair for walk-behind models.

Height adjustment axle assembly for walk-behind mowers. Mounts to the deck to control cutting height. Replace if cracked, bent, or stripped threads.

Front axle assembly for walk-behind mowers. Mounts between wheels to support and align the front of the deck. Replace if bent, cracked, or damaged.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

These are 8-inch front drive wheels designed for self-propelled lawn mowers. They provide traction and forward movement when engaged with the drive system. Replace these wheels if they're cracked, worn down, or if your mower has difficulty moving forward on its own.

Replace your worn or damaged 11-inch drive wheel assembly on self-propelled walk-behind mowers. Essential when the wheel is cracked, broken, or missing.

Upper control housing for walk-behind mowers. Installs on the handle assembly. Replace if cracked, broken, or damaged. Secures control mechanisms.

Mower won't self-propel or speed control not working? This drive cable connects the control lever to the transmission. Simple DIY fix for most users.

Control cable for walk-behind mowers. Connects throttle or self-propel controls to engine or drive system. Replace if cable is broken, frayed, or stretched.