Parts for Ikea IK8FXNGFDM00: Liner & Icemaker Parts

Stops refrigerator fan rattling and buzzing noise. This rubber grommet cushions the fan motor to reduce vibration. Simple DIY fix, takes under 30 minutes.

Replace your refrigerator door gasket to restore a tight seal and prevent air leaks. Worn gaskets cause energy loss and temperature issues. Verify fit.

White hole plug covers unused openings in your refrigerator cabinet. Replace when missing or damaged to seal gaps and protect internal components.

Fix a refrigerator that won't cool, has no power, or shows error codes with this wire harness. Connects control board to sensors and components.

Refrigerator not cooling but freezer works? A failed evaporator fan motor stops cold air circulation. DIY repair in 30-45 minutes with basic tools.

Fridge not cooling but freezer works? A worn evaporator fan blade prevents cold air circulation. Easy 15-minute DIY fix with our video guide.

Fix uneven cooling or freezing in fresh food section with a new air duct. Channels air from freezer to refrigerator compartment. Basic DIY repair.

Fix freezing fresh food or inconsistent cooling. This temperature sensor thermistor monitors refrigerator temps and signals the control board. DIY repair.

Frost buildup or uneven cooling? This evaporator cover directs airflow through the freezer. Replaces cracked or warped covers to restore consistent cooling.

LED light bulb for refrigerator and freezer compartments. Replace when lighting fails or dims. Verify fit by checking your model number compatibility.

Secures internal components in your refrigerator to keep parts stable and prevent rattling. Replace if bent, broken, or missing to restore alignment.

Replace your refrigerator's cracked or missing component cover housing. This protective cover shields internal parts and provides a finished look.

Fix temperature control issues or non-responsive settings with this refrigerator electronic control board. Restores proper function and monitoring.

Is your refrigerator cooling unevenly or forming frost in certain spots? A cracked air diffuser disrupts airflow distribution. Simple DIY repair.

Fix intermittent power, no-start issues, or control errors in your refrigerator. This wire harness restores electrical communication between components.

If your refrigerator has uneven cooling or temperature issues, a faulty air damper may be blocking airflow. This part regulates air between compartments.

Plastic cover that snaps over exposed tube fittings inside your refrigerator. Replace if cracked, broken, or missing to restore clean appearance.

Fix a refrigerator that won't defrost, freezes food, or has temperature control issues. This electronic control board regulates compressor and fan operation.

This burner orifice meters the gas delivered to a burner so you get a stable, properly sized flame. Replacing a clogged or damaged orifice helps restore quick ignition, consistent flame quality, and even heating on gas appliances.

• Meters gas flow from the valve to the burner for correct flame size and shape
• Helps maintain efficient, even heating and clean combustion
• Wear or blockage may show as delayed or no ignition, weak/uneven flame, or yellow tipping
• Can reduce popping or flare-ups caused by improper gas metering

• Shut off gas supply and disconnect power before servicing
• Remove the old orifice with the proper wrench/nut driver; install the new one snugly—do not overtighten
• After reassembly, leak-check connections and verify flame; adjust air shutter only if specified by the service manual

Replacement cover for top-mount refrigerators. Restores appearance when original is cracked, broken, or missing. Direct fit for compatible models.

Refrigerator not cooling or won't power on? The control box regulates cooling functions. A scorched board or moisture damage requires replacement.

Secures and shields the freezer light assembly. Replace if cracked, broken, or missing to restore proper light protection and a clean appearance.

Fix dim or unprotected interior lighting with a new light lens. Covers and protects the bulb while diffusing light evenly. Simple DIY swap.

Replace a worn or damaged light socket to restore reliable interior lighting. Fixes flickering bulbs and intermittent power issues. Confirm fit by model.

The LED Lamp 120V E14 is an OEM part for Whirlpool refrigerators. This lamp provides interior lighting, illuminating the refrigerator compartments to help you easily see and access your food items. The LED technology ensures energy efficiency and long-lasting performance compared to traditional bulbs.

Causes of a bad LED lamp can include electrical issues, power surges, or simply reaching the end of its lifespan. Without proper lighting, the refrigerator can become inconvenient to use, especially in low-light conditions.

Symptoms of a bad LED lamp include:

• Dim or flickering light inside the refrigerator
• Complete failure of the interior light
• Intermittent lighting issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Missing or cracked ice bin? This replacement ice cube pan restores contained ice storage in your refrigerator's freezer. Simple slide-in installation.

Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.

Connects ice maker to freezer wiring. Replace if wires are pinched, damaged, or connector is broken. Installs between ice maker and freezer cavity wall.

Mounting bracket that secures the ice maker assembly to the refrigerator wall. Replace if cracked, broken, or missing to restore proper ice maker support.

Ice maker not making ice or leaking? This complete ice maker kit replaces corroded contacts and faulty assemblies. DIY-friendly installation in 30-60 minutes.

Refrigerator door closer arm that installs on the door hinge mechanism. Replace if the original arm is cracked, broken, or missing from your refrigerator.