Parts for Whirlpool WRT111SFAW00: 03 - Liner Parts

This mechanical defrost timer advances the refrigerator's defrost cycle so the evaporator periodically melts accumulated frost. It helps restore normal cooling cycles and prevents excessive frost buildup for more reliable refrigerator performance. What it does:

• Advances the appliance between cooling and defrost modes on a timed schedule
• Stops the compressor during defrost so accumulated ice on the evaporator can melt
• Commonly replaced when heavy frost builds on the evaporator or the fridge/freezer cycles abnormally
• Can address symptoms such as excessive frost, reduced cooling, or continuous compressor operation

• Disconnect power to the appliance before starting any repair
• Access the timer through the back or control area per your model's service instructions
• Note wire locations or take a photo before disconnecting to ensure correct reassembly

Freezer icing up or not defrosting? This refrigerator defrost thermostat monitors evaporator coil temperature. DIY repair in 15-30 minutes with video.

This is a replacement mounting screw used to secure appliance panels and small components. It provides a correct-fit fastener to restore secure attachment and eliminate rattles or loose parts. What it does:

• Secures trim, panels, brackets, or small assemblies to prevent movement and vibration
• Restores proper alignment when a worn or missing screw causes loose parts or noise
• Works as a direct-replacement fastener where the OEM screw specification is required

• One replacement screw

• Use the correct driver bit to avoid stripping the head; do not overtighten
• Disconnect power and follow appliance safety guidelines when accessing internal components
• If the original mounting hole or threads are damaged, repair or replace the mounting hardware before reinstalling

White hole plug covers unused openings in your refrigerator cabinet. Replace when missing or damaged to seal gaps and protect internal components.

Mounting bracket that holds and stabilizes internal refrigerator components. Replace if cracked, broken, or missing to restore proper alignment.

Fridge not cooling but freezer works? A worn evaporator fan blade prevents cold air circulation. Easy 15-minute DIY fix with our video guide.

Fix refrigerator temperature problems or erratic cooling with this control box. Manages compressor and defrost cycles. Moderate DIY repair with basic tools.

This thermostat monitors and regulates oven temperature to help the range reach and maintain the set cooking temperature. Replacing a faulty thermostat restores more consistent baking and roasting results. What it does:

• Senses oven temperature and signals the controller to cycle heating for consistent temperatures.
• Helps prevent the oven from running continuously or failing to reach set temperature.
• Common symptoms that indicate failure: oven won't heat properly, temperature swings, or uneven cooking.
• Direct replacement for the original thermostat used to restore accurate temperature control.

• Disconnect power to the appliance (unplug or shut off circuit breaker) before servicing.
• Access may require removing the oven back panel or control panel.
• Handle the thermostat sensing element gently to avoid damage; route any capillary/sensor tubing carefully.

Size: 8-18 x 1/2 inch.

Fix uneven cooling or frost buildup in your refrigerator with a new evaporator cover. This protective panel ensures proper airflow over the coils.

The LED Lamp 120V E14 is an OEM part for Whirlpool refrigerators. This lamp provides interior lighting, illuminating the refrigerator compartments to help you easily see and access your food items. The LED technology ensures energy efficiency and long-lasting performance compared to traditional bulbs.

Causes of a bad LED lamp can include electrical issues, power surges, or simply reaching the end of its lifespan. Without proper lighting, the refrigerator can become inconvenient to use, especially in low-light conditions.

Symptoms of a bad LED lamp include:

• Dim or flickering light inside the refrigerator
• Complete failure of the interior light
• Intermittent lighting issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement screw that secures panels, covers, brackets, and trim to appliance frames. Needed when original screws are stripped, missing, or damaged.

Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.

Replacement cover for top-mount refrigerators. Restores appearance when original is cracked, broken, or missing. Direct fit for compatible models.

Replace your refrigerator's temperature control knob if it's cracked, broken, or missing. This knob installs on the thermostat to adjust cooling settings.

Replace your refrigerator evaporator cover if you notice uneven cooling or frost buildup. This housing protects the evaporator coil and directs airflow.

Rubber grommet cushions wiring and tubing pass-throughs in refrigerators. Replace when worn to reduce vibration, prevent chafing, and restore quiet operation. Verify fit with your model number.

Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.

This replacement vent motor drives the appliance's ventilation system. Restoring a strong, consistent motor ensures proper airflow so heat and moisture are moved away from critical areas and the unit operates as designed. What it does:

• Powers the vent mechanism or blower to move air through the appliance
• Helps regulate internal temperature and moisture during operation
• Common symptoms include no vent/fan operation, weak airflow, loud humming or grinding, or intermittent/stuck vent action
• Restores proper ventilation performance when the original motor has seized, overheated, or become noisy

• Disconnect power at the breaker before servicing
• Allow the unit to cool and use gloves; sheet-metal edges can be sharp
• Note wiring and mounting orientation; transfer any fan blade, bracket, or linkage from the original motor as required
• After mounting, confirm free rotation/vent movement before restoring power

This replacement thermostat knob restores safe, easy temperature selection on compatible ranges and ovens. It provides a secure grip and clear setting alignment so you can accurately set bake and broil temperatures. What it does:

• Replaces a cracked, stripped, or missing temperature control knob
• Allows smooth turning to select oven temperature settings
• Restores tactile feedback and alignment with the control panel
• Helps eliminate slipping or poor connection between user and thermostat shaft

• Includes: 1 thermostat knob

• Disconnect power to the appliance before beginning any service
• Most knobs pull straight off the control shaft; align splines and press firmly to install
• If a set screw is present, tighten securely but do not overtighten

Uneven cooling or frost buildup in your refrigerator? This air deflector guides airflow to restore consistent temperatures and eliminate hotspots.

Small washer component for your refrigerator. Used in various internal assemblies. Replace if worn, damaged, or missing to restore proper fit and function.

Factory replacement screw that secures appliance components and hardware. Use it to replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and help prevent loosening or damage from vibration.

• Fastens brackets, panels, or internal parts at the original mounting points
• Replaces worn or missing hardware to correct loose or misaligned components
• Helps reduce vibration-related noise and movement
• Matches the original thread and length specified for the application

• Disconnect power; shut off water or gas if applicable before servicing
• Compare to the original for thread and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• Reuse any original spacers/washers if present; replace if damaged

Cap screw for refrigerators. Used to secure internal components and panels. Replace if screw is stripped, missing, or damaged during maintenance.

Loose panels or rattling components? This self-locking hex washer head screw secures refrigerator panels and brackets with vibration-resistant hold.