Parts for Ge JE1160WD03: 01 - Microwave Parts

The Microwave Door Switch is an OEM replacement part for GE microwaves. It is crucial for safety functionality as it detects when the door is properly closed and latched before initiating cooking cycles. The switch prevents operation if the door is ajar.

Causes of a bad door switch can include wear and grime accumulation over many years of use, impact damage, or failures in the plastic actuator or electrical components.

Symptoms of a bad door switch include:

• The microwave failing to start cooking even with the door closed and latched
• Error messages related to the door position being displayed
• Inability to lock or properly sense the closed door position

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a light bu, and it is made for microwaves. This is a genuine replacement part made by General Electric. This specific light bu has a voltage of 120 and a wattage of 25.A new light bu might be needed if the current one does not turn on when the microwave door is opened. The light bu should also be on when the microwave is in use so that the user may see the food during the heating cycle. It is common for light bu to burn out over time and they are very easy to replace when needed.This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with microwaves made by General Electric.

The Magnetron is an OEM replacement part for GE microwaves. It is responsible for generating the microwave energy used for cooking and heating food. Over time, magnetrons can wear down and become less effective. 

Symptoms of a bad Magnetron include:

• The microwave not heating food, even though it turns on and the timer counts down
• Unusual noises, such as a loud hum or buzz, during operation
• Burnt smells or smoke emanating from the microwave
• Error codes on the microwave’s display indicating a heating issue

Causes for a malfunctioning Magnetron can include a burnt-out magnetron, issues with the high-voltage diode that powers it, or problems with the control board that regulates its operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Microwave suddenly lost power or won't heat? A faulty thermostat cavity can cause total failure. This housing secures the sensor for proper alignment.

This microwave magnetron thermostat is an authentic OEM part sourced directly from the manufacturer. It is used in microwave ovens to prevent fires and extensive damage to the machine if the magnetron overheats. If the thermostat reaches an unsafe temperature, determined by the factory, it will stop the microwave from cooking. If this happens, the magnetron thermostat may be the culprit and should be replaced. A built-in safety feature will prevent the microwave from working until the thermostat is replaced. To start, disconnect the power from the microwave. Use a screwdriver to remove the trim kit. Use a safety drill bit to remove the microwave panels. Locate the thermostat that is connected to the magnetron. To start, disconnect the wires and remove the thermometer from the microwave. Install the new thermostat and connect the wires. Reassemble the microwave and reconnect the power. Test to make sure the power works with the new thermostat installed.This magnetron thermometer is an electrical part that is sold individually. It is designed for use in microwave ovens manufactured by General Electric and Hotpoint.

Fix a microwave door that won't latch or close securely with this door lock assembly. Common solution when your door won't stay shut during operation.

Replacement power cord assembly for your microwave. Installs at the rear panel to connect your unit to wall outlet. Order if damaged, frayed, or missing.

This coupler connects two rotating shafts to transfer motor power to the driven assembly, restoring proper rotation and drive function. It's a direct-fit replacement that helps resolve drive interruptions and mechanical noise caused by a failed coupler. What it does:

• Joins the motor shaft to the driven shaft or gear assembly to transmit torque
• Restores rotation when a worn or broken coupler prevents the appliance from turning
• Reduces slipping and eliminates clunking or grinding noises caused by a damaged coupling
• Keeps shafts aligned to prevent premature wear of connected components

• Disconnect power before servicing to avoid electrical shock or injury
• Inspect mating shafts and fasteners for damage; replace damaged parts as needed
• Use basic hand tools; secure coupler per OEM torque/fastening recommendations

Line filter assembly for microwaves. Suppresses electrical interference from the power line. Replace if cracked, damaged, or missing for proper operation.

Secures the high voltage capacitor in your microwave. Replace if broken, loose, or missing to prevent capacitor movement and electrical hazards.

Replacement thermostat holder for your microwave. This mounting bracket secures the thermostat in place. Order a new one if yours is cracked or broken.

Microwave not heating or heating poorly? This high-voltage diode converts AC to DC for the magnetron, restoring normal heating. Moderate DIY repair.

The Primary and Secondary Door Switch is an OEM replacement part for GE microwaves. This part interrupts the power supply to the microwave when the door is opened.   

Causes of bad door switches can include regular wear and tear, electrical malfunctions, or physical damage from slamming the door.  

Symptoms of a bad Primary and Secondary Door Switch include:

• The microwave not starting or operating intermittently
• The appliance operating with the door open
• The interior light not turning on or off appropriately

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a microwave door that won't open or latch properly with this sliding latch component. Restores secure door engagement when the release button fails to work.

Replace a cracked, broken, or missing microwave foot. This support leg installs on the bottom of your microwave to stabilize and level the unit.

Fix your microwave's overheating or poor ventilation with this blower wheel. Replaces worn fan blades causing noise or ineffective cooling.

Color: clear. Measures about 13 inches in diameter.

Fix a microwave door that won't close or latch properly with this door latch assembly. Common solution for doors that pop open during operation.

Upper door hinge for microwave ovens. Mounts at the top of the door frame to support and pivot the door. Replace if cracked, bent, or broken.

Microwave stops heating but clock still works? This door interlock switch monitors door position and prevents operation when the door isn't latched securely.

This replacement door gasket creates an airtight seal around the refrigerator door to help maintain proper temperature and efficiency. It restores the seal that keeps cold air in and warm air out for better food preservation. What it does:

• Seals the door perimeter to prevent cold-air leaks and reduce frost buildup
• Helps maintain consistent internal temperatures for food safety
• Reduces compressor run time caused by air exchange at a failed seal
• Improves energy efficiency by restoring a proper door seal

• Designed to be installed by a service technician or a confident DIYer with basic tools
• Remove the old gasket and clean the door surface before installing the new seal
• Warm the gasket slightly to aid seating, if recommended for your model