Parts for Ge CDT875M5N2S5: Motor, Sump & Filter Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Specs: B-16 HXW 1/2 SS

Dishes still wet after cycle? This dishwasher dry boost heater and blower assembly circulates heated air to remove moisture and restore drying performance.

The Variable Speed Wash Pump Service Kit is an OEM part for GE dishwashers. It is designed to provide water circulation during the dishwashing cycle. It includes all the necessary components to replace worn-out or damaged parts, including the wash pump motor, impeller, and seals.

A bad variable speed wash pump can result in poor cleaning results, unusual noises, or even a complete failure of the dishwasher to run. Causes of a bad variable speed wash pump can include wear and tear over time, clogging or blockage in the pump, or damage to the pump motor.

Symptoms of a bad variable speed wash pump include:

• Inadequate cleaning performance with residue or food particles remaining on dishes
• Unusual grinding or humming noises during operation
• Leaks or water pooling at the bottom of the dishwasher
• Complete failure of the dishwasher to start or run

Replace your worn-out or malfunctioning variable speed wash pump with this genuine OEM GE service kit to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Fix excessive vibration or loud operating noise during wash cycles with this dishwasher wash pump isolator. Cushions pump assembly to reduce wear.

Fix longer wash times with a new dishwasher turbidity sensor. This water quality monitor detects food particles to ensure proper rinse clarity.

Fix a dishwasher that won't drain with this variable speed drain pump assembly. Solves standing water issues caused by pump failure or motor burnout.

Fix H2O error codes and water fill issues with this dishwasher pressure sensor. Monitors water level for proper fill cycles. DIY repair in about 1 hour.

If your dishwasher filter cover won't stay locked or water circulation seems weak, the sump latch may be broken. This latch secures the filter assembly.

Prevents water leaks around the dishwasher door during wash cycles. Replace if you notice water pooling at the bottom. Confirm fit with your model number.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Fixes water backing up into dishwasher after cycle ends. This check valve prevents backflow through the drain system. Requires tilting unit.

Traps small food particles at the bottom of your dishwasher tub to prevent clogs and maintain cleaning performance. Replace if torn or damaged.

Fix inconsistent water pressure or interrupted spray in your dishwasher. This four-port diverter directs water flow through cycles. Includes disc and magnet.

Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.

Lower spray arm assembly for dishwashers. Installs in the lower zone to distribute water during wash cycles. Replace if cracked, broken, or worn.

Fix cloudy dishes and drainage issues with a new coarse filter. Traps large food particles to protect your dishwasher pump and prevent clogs. Direct fit.

Fix inconsistent water pressure or interrupted spray in your dishwasher. This four-port diverter directs water flow through cycles. Includes disc and magnet.

The Sump Overmold Service Kit is an OEM part for GE dishwashers. It includes the sump and filter assembly that collects food debris and drains water at the bottom of the dishwasher. This over-molded, tightly-sealed design removes soils and prevents leaks. 

Causes of failure can be cracks, chips, or splits to the sump overmold due to excessive mineral buildup, high heat, or other wear over time. Foreign objects entering the sump area may also damage the filter mesh.

Symptoms of a faulty sump over mold assembly include:

• Standing water at the bottom of the dishwasher  
• Water leaks during or after the cycle
• Poor draining or poor rinsing performance
• Grime or food debris stuck to dishes

This genuine GE part is compatible also with Hotpoint, RCA, and select Kenmore brands.

Fix a loose or wobbly lower spray arm with this spray arm hub. Restores water pressure and cleaning performance. Simple DIY repair for most models.

Fix spray arm falling off or wobbling with this dishwasher adapter. Connects spray arm to water feed mount for proper rotation and cleaning coverage.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.