Mtd Gold Chipper Shredder Parts

Hex cap screw secures components on lawn tractors, tillers, snowblowers, and garden equipment. Replace if broken, stripped, or missing.

Replacement hex bolt for lawn tractors, log splitters, and wood chippers. Secures components when original is stripped, missing, or corroded.

Hex screw that secures components on lawn tractors and outdoor power equipment. Replace if screw is stripped, missing, or damaged during maintenance.

This is a replacement screw for lawn and garden equipment that is typically used on the blades. The flat head of the screw ensures that they will sit flush once they have been installed. These screws, which have hex-socket heads, are often found on the blades of chippers and shredders. If a blade is loose, it could be a problem with the screws that are holding it in place. This could make the machine inefficient and even dangerous to operate. Therefore, if there are screws that are worn down or that are no longer doing their job, it is important to replace them. It is essential to use the appropriate screws for a repair. This is a genuine OEM sourced replacement part that comes from the manufacturer. This helps to ensure quality and compatibility. The screw is sold individually. It is compatible with a range of chippers and shredders from MTD, Troy-Bilt, Cub Cadet, Ryobi, Yard-Man, Yard Machines, and Mastercut.

This genuine OEM replacement jam nut attaches to the idler bracket on a tiller. Jam nuts are a special type of nut designed to not unthread or strip out over time. Jam nuts are usually fastened on with another standard nut and then the two nuts are tightened against each other. Jam nuts can be easily identified from a standard nut because they are roughly half the size. Jam nuts can be lost while making repairs because of their small size. If lost, it might not affect the idler bracket immediately, but over time the standard nut may begin to slip or unthread. Therefore, the jam nut should be replaced as soon as possible. When making this replacement, be sure to unthread the standard nut as well and then tighten them both together using a wrench. This replacement jam nut is a high-quality part sourced from its original manufacturer. It is compatible with Troy-Bilt, Yard Man, Huskee, MTD, Ryobi, Yard Machines, and Cub Cadet tillers. This part does not ship with any additional hardware.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

This replacement part is a pin. This is a genuine replacement part made by MTD. Pins are typically small but important parts of many machines and appliances. They are responsible for holding different parts together to allow for the machine to operate smoothly. A new pin might be needed if the current one is missing or damaged. Pins can easily become lodged into place due to normal wear and tear. This repair should be fairly simple and require only common household tools such as a screwdriver and possibly pliers. Refer to the proper user manual before attempting to replace this part. This part is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

Snap ring fastener for lawn mowers and outdoor power equipment. Secures components on shafts and axles. Replace if worn, broken, or missing.

This part is a replacement return hose. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached return hose in a variety of outdoor power equipment. The return hose returns any excess fuel from the carburetor back into the fuel pump. Over time, this part can become worn or may be punctured, which can cause fuel leaks. In this case, it should be replaced immediately before the equipment is used again. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this return hose, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this return hose is suitable for use on several different models of chippers, shredders, and log splitters manufactured by MTD, Troy-Bilt, Yard Man, Cub Cadet, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

Protective hub cap for walk-behind lawn mower wheels. Shields the wheel hub from dirt, debris, and moisture. Replace if cracked, broken, or missing.

Extension spring for riding mowers and lawn tractors. Replaces worn, broken, or missing springs in various linkage and control systems. Direct fit part.

Replacement spring for lawn tractors and riding mowers. Restores tension and function when original spring is broken, stretched, or missing.

This is a replacement front lever spring. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective front lever spring on a variety of outdoor power equipment models. This part helps to adjust the height of the equipment deck to allow it to reach the optimal cutting height for different types of terrain. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this front lever spring, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this front lever spring is suitable for use on several different lawnmower models, log splitters, and chippers manufactured by MTD, Craftsman, Yard Man, Cub Cadet, Husky, Yard Machines, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

Replacement wheel assembly for lawn mowers and chipper shredders. Installs on axle to support and maneuver equipment. Replace if cracked, broken, or dry rotted.

This is a complete wheel assembly for walk-behind and push lawnmowers. It is a single replacement wheel for the front wheels on a mower. Wheels may be damaged by impact with hard objects or from exposure to the elements over time. When the wheel is visibly damaged or otherwise does not roll as well as it should, it should be replaced.If the user is having difficulty pushing the walk-behind lawn mower, a visual inspection of the wheels will determine if a new part is required. Replacing a wheel on a lawn mower is simple. Tools including a socket set, pliers, and a screwdriver may be necessary to perform the repair.This wheel is a genuine OEM replacement part. It is compatible with MTD, Troy-Bilt, and Yard-Man machines. It is sold as an individual unit. The wheel is made of durable plastic.