Kenmore Washer 110.74450100 (11074450100, 110 74450100) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10501250
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Shift actuator Jesse M. • Nipomo , CA • October 04, 2025
With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Whirlpool part
By: Whirlpool
Part Number: W10814296
Seals the center post/agitator shaft to prevent water leaks during wash cycles. Replace if you notice pooling water under your washer. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Whirlpool lsr7233eq0 washing machine was leaking out the bottom Jerald F. • Laud Lakes , FL • April 05, 2015
I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the...
Read more
More
$7.48
- Compare At:
-
$8.98
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$22.53
- Compare At:
-
$32.43
- You Save:
-
$9.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577376
The Shaft Seal is an OEM part for Whirlpool washing machines. This seal is designed to fit around the shaft that connects the tub to the transmission or motor, preventing water from leaking out of the tub and into the machine's internal components.
Causes of damage to the Shaft Seal often involve normal wear and tear from regular use, as the constant motion of the shaft can gradually degrade the seal.
Symptoms of a bad Shaft Seal include:
- Water leaking from the underside of the washing machine, particularly during or after a wash cycle
- A noisy operation, especially during the spin cycle, can sometimes result from water leaking into the bearings and causing them to fail
- The presence of rust or corrosion around the area where the shaft enters the tub
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water on the floor. Steven S. • Eupora , MS • December 24, 2018
Just like the one's I have worked on for 30 years for Whirlpool.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414
Specs: 10-16 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Dryer drum was beginning to stall occasionally Dana J E. • San Marcos , CA • March 17, 2015
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546455
Supports the spin basket on the center post for smooth, quiet rotation. Replace if your washer is noisy, vibrating excessively, or has poor spin performance.
More
$18.26
- Compare At:
-
$21.55
- You Save:
-
$3.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP273556
Size: 10-16 x 5/8 inch.
Do-It-Yourself Stories from Customers like You
Console screws were rusty and the other screw was broken. Denis C. • Baltimore , MD • June 20, 2018
I used a screwdriver and removed all three screws and replaced them with ones I ordered from you. The job took less than ten minutes to complete.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90016
Used from harness to top.
Do-It-Yourself Stories from Customers like You
A broken lid switch on my whirlpool stackable twin washer Joseph P. • Indialantic , FL • October 25, 2016
Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I...
Read more
More
$7.44
- Compare At:
-
$8.85
- You Save:
-
$1.41
Genuine Whirlpool part
By: Whirlpool
Part Number: 350365
Fix a washer that won't drain or spin with this drain pump. Common repair for water remaining in tub after cycle. Moderate DIY repair effort.
Do-It-Yourself Stories from Customers like You
Water drain pump would not turn any more Robert T. • Belleville , IL • January 20, 2016
Ordered a replacement. Had to tip washer toward the back to provide access underneath to the
pump. Had some difficulty removing the two hose clamps. Pliers were not the best tool. Had to ensure the drive belt was properly engaged with the pulley of the pump.
Read more
More
$96.59
- Compare At:
-
$115.91
- You Save:
-
$19.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP359231
Washer won't start or stops mid-cycle? A damaged lid switch shield can expose wiring to moisture, causing safety interlock failures. Simple fix.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21365
Small metal spacer washer that distributes load and maintains alignment in washer assemblies. Replace when worn, missing, or damaged to restore secure fit.
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate or spin. Laurie W. • Webster , NH • March 25, 2017
We were a bit doubtful that we could find parts for this Whirlpool washing machine as it is 22 years old. We were SO pleased that not only could we find them ( with excellent customer service) but they were shipped in an appropriate time. My handy husband was then able to repair it himself :)
Read more
More
$7.40
- Compare At:
-
$8.88
- You Save:
-
$1.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3351614
Size: 10-24 x 3/8 inch.
Do-It-Yourself Stories from Customers like You
Timer/control failed Gilbert G. • Lansing , IL • July 09, 2018
Replaced timer control unit, first time doing this.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356418
This screw-washer assembly secures panels, brackets, and other appliance components. The integrated washer spreads load and resists loosening, so replacing a worn or missing fastener restores a tight, reliable fit and helps eliminate rattles.
- Provides fastening with a built-in washer for even clamping and retention
- Replaces missing, stripped, or corroded hardware
- Helps address loose panels/handles and vibration or rattle noises
- Supports proper alignment of covers, brackets, and trim
What's included: 1 screw-washer assembly Install notes:
- Disconnect power and shut off water or gas (as applicable) before servicing
- Match to the original fastener; location and quantity in your model's parts diagram
- Start threads by hand to avoid cross-threading; tighten with the correct driver
- Do not overtighten; replace other severely rusted or damaged fasteners in the same area
Do-It-Yourself Stories from Customers like You
Timer/control failed Gilbert G. • Lansing , IL • July 09, 2018
Replaced timer control unit, first time doing this.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3370639
This replacement caster and socket assembly restores smooth rolling and stable support for the appliance cabinet. Use it to replace a worn or damaged wheel and mounting socket so the appliance moves easily and sits level. What it does:
- Provides a rolling wheel and mounting socket to support appliance movement and weight.
- Replaces cracked, seized, or worn casters that cause dragging, sticking, or uneven motion.
- Helps reduce noise and cabinet scuffs from a damaged or loose wheel.
- Restores proper alignment when the appliance tilts or does not roll smoothly.
What's included: One caster and socket assembly. Install notes:
- Disconnect power and water and move the appliance to a safe, stable work area before starting.
- Support the appliance to prevent tipping when removing/installing the caster.
- Remove any trim or mounting hardware covering the caster; match orientation and fasteners when installing the replacement.
- After installation, verify the appliance rolls smoothly and sits level; tighten fasteners as needed.
More
$38.95
- Compare At:
-
$46.74
- You Save:
-
$7.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 386011
$32.95
- Compare At:
-
$39.54
- You Save:
-
$6.59