Kenmore Washer 110.21292011 (11021292011, 110 21292011) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8312709
The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment.
Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.
Symptoms of a bad clip include:
- Loose console assembly that is not securely fastened
- Misaligned or dangling controls that do not sit flush
- Dislodged console at risk of detaching from housing
- Missing clip leaving an open mounting point
This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes Jay S. • Hammond , IN • February 07, 2017
I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new...
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9724509
These lid bumpers are sold individually.
Do-It-Yourself Stories from Customers like You
Water pump after 18 years wore thru the pvc housing causing a pin hole leak James B. • Palomar Mountain , CA • April 13, 2014
Found AppliancePartsPros on-line. Sent us the manual, parts list, etc. via .pdf files. Our local guy did not. Had parts in stock, two day shipping, totally painless. The parts were approximately 1/2 the price the local guy wanted. OEM parts. Perfect fit on replacement. The Whirlpool is so well made, it was very easy to repair. It has several items, over the years, which failed. In all cases, repair was painless with a few common hand tools and a tad of patience. AppliancePartsPros had...
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W10804665
Fix a washer that fills but won't spin or agitate. This motor start capacitor stores electrical energy to help start your washer motor. DIY repair.
Do-It-Yourself Stories from Customers like You
Bad capacitor Jeremy L. • Calera , OK • April 28, 2014
I was actually getting an error code for the shifter and speed sensor. I ordered a shifter, which included the speed sensor, and replaced that part but the washer still didn't work. After doing some more research online, someone mentioned that the capacitor may be bad. After talking to my dad, who is an electrician, he said it sounded like my problem could very well be the capacitor.
Knowing that we'd been without a washer for almost two weeks at this point, I went ahead and ordered the...
Read more
More
$48.37
- Compare At:
-
$57.56
- You Save:
-
$9.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21258
The lid hinge bearing is used for the lid hinges on washers and dryers. When functioning properly, it allows the lid to open and close properly. If this is a problem with the bearing, it could make the lid difficult to move. In some cases, when the lid will not close, it means that the machine will not function correctly. Damaged lid hinge bearings should be replaced as soon as possible.The lid hinge bearings see a lot of work since they are in use whenever the lid of the washer or dryer opens and closes. They could become cracked and broken over time. Replacing the bearings is a relatively simple repair that owners can make on their own.This lid hinge bearing is for use with many models of washers and dryers from Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Admiral, Amana, Crosley, and Magic Chef. This is a genuine OEM replacement part that has been sourced from the manufacturer. The piece is sold individually, so if owners need to replace more than one hinge, they will need to buy multiples.
Do-It-Yourself Stories from Customers like You
Whirlpool washer David L. • Linn , MO • August 31, 2015
With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved.
Read more
More
$11.95
- Compare At:
-
$13.33
- You Save:
-
$1.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215108
Snaps onto the outer tub to contain splashing and guide water back into the basket. Replace if cracked or loose to stop leaks and prevent imbalance issues.
Do-It-Yourself Stories from Customers like You
Suspension and ring tub Michael M. • Grand Bay , AL • November 14, 2015
Replace the all four suspension and ring tub. it work like brand new. thanks for having the parts that i needed. and the fast shipping. michael moore
Read more
More
$99.95
- Compare At:
-
$119.94
- You Save:
-
$19.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192089
Cracked bleach dispenser leaking onto your washer? This cup holds and meters bleach during wash cycles. Simple snap-in installation, video included.
Do-It-Yourself Stories from Customers like You
Broken part Douglas W. • Snohomish , WA • February 11, 2025
REPLACED
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
- Fastens panels, brackets, or internal parts to the cabinet/frame
- Helps maintain alignment to reduce vibration and rattling
- Replaces lost, stripped, or corroded screws
- Common symptoms: loose panels/trim, rattles, or a screw that won't tighten
What's included: One screw. Install notes:
- Disconnect power; shut off water or gas if applicable
- Match thread and length to the original; replace one at a time to keep alignment
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten, especially into plastic or thin sheet metal
Do-It-Yourself Stories from Customers like You
Missing baffles Anna S. • Shoreview , MN • January 31, 2016
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8578209
Fixes poor cleaning or clothes not moving during wash cycle. This agitator restores proper wash action by rotating and lifting laundry through water. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Agitator was broke Daniel P. • Madison , OH • August 09, 2016
Striped the agitator out and replaced the bottom portion of agitator.
What was amazing was I placed the order Friday at 5 pm. It arrived Saturday at7:30pm.
Read more
More
$100.95
- Compare At:
-
$121.14
- You Save:
-
$20.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10356257
This mixing valve bracket secures the washer's water inlet valve to the cabinet, keeping the valve steady and properly aligned for hose connections. A correct-fit bracket helps reduce rattles and potential leaks caused by a loose valve.
- Mounts and supports the water inlet/mixing valve on the rear panel
- Maintains proper alignment for hot and cold supply connections
- Helps reduce vibration and rattling noises during fill
- Common signs it's needed: loose or dangling valve, misaligned hose connections, or leaks at the valve fittings
What's included: 1 bracket Install notes:
- Disconnect power and turn off both water supplies; relieve pressure before removing hoses
- Access the rear of the washer and remove fasteners securing the existing bracket/valve
- Transfer the valve to the new bracket, reusing the original hardware
- Reattach the bracket to the cabinet, reconnect hoses, restore power and water, then check for leaks
Do-It-Yourself Stories from Customers like You
No cold water into washer Jack F. • Altoona , PA • March 01, 2015
Replaced water inlet valve
Read more
More
$91.95
- Compare At:
-
$109.42
- You Save:
-
$17.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10432353
Fix washer water leaking into tub or slow dripping when off. Water inlet valve assembly replacement stops fill valve leaks. Easy DIY repair with video.
Do-It-Yourself Stories from Customers like You
Water inlet and lid latch switch Michael R. • Almena , WI • March 28, 2016
I ordered from this company expecting the parts to be later than they said and the parts showed up in 2 days like they said. Just before the Easter holiday even. Amazingly fast. Very satisfied!!! Washer is up and running again. Great job on getting me my parts! Thank you!
Read more
More
$129.95
- Compare At:
-
$154.64
- You Save:
-
$24.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10273971
This factory screw secures panels, brackets, and other components in your appliance. Replace a missing, stripped, or corroded fastener to restore a tight fit and keep parts properly aligned and rattle-free.
- Secures appliance components and panels in their mounting points
- Replaces damaged, stripped, or missing hardware
- Helps reduce rattling or vibration from loose parts
What's included: One screw Install notes:
- Disconnect power; shut off water or gas supplies if applicable
- Match location with the original screw; start threads by hand to avoid cross-threading
- Tighten until snug; do not over-torque, especially into plastic or thin metal
- Reinstall any covers or panels and test for secure fit
Do-It-Yourself Stories from Customers like You
E3 F5 Stacy J. • Elk Grove , CA • August 03, 2018
In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8537434
This dishwasher cam assembly is a precision-molded drive component that converts rotation into the timed movement the mechanism needs. Replacing a worn cam helps restore smooth, reliable actuation during the cycle and reduces sticking or misalignment.
- Converts rotational input into precise motion for the linked latch/actuator mechanism
- Maintains proper timing and engagement so the mechanism operates when commanded
- Wear or cracking can lead to slipping, binding, or incomplete travel
- Typical symptoms: associated action fails to engage/release at the right time, intermittent operation, or clicking/grinding noises from the mechanism
What's included: 1 cam assembly Installation notes:
- Disconnect power at the breaker and shut off water before servicing
- Access the mechanism; note cam orientation and linkage positions
- Transfer any reusable pins/springs; install the new cam in the same orientation
- Run a test cycle to ensure proper operation and check for leaks or abnormal noises
Do-It-Yourself Stories from Customers like You
Agitator didn't work Rick K. • Naperville , IL • June 20, 2021
Simple by using 7/16 socket with long extension to remove the bolt and pull the whole agitator out and clean them. Put back in together with new parts. It works fine now.
Read more
More
$64.22
- Compare At:
-
$76.42
- You Save:
-
$12.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215093
Washer won't drain or clothes have residue? Replace the drain pump filter that screens debris and prevents clogs. Protects pump from damage.
Do-It-Yourself Stories from Customers like You
The gears were rusted and stripped in the transmission and the hub was cracked. Blane L. • Columbus , OH • January 11, 2019
On a 3 year old Maytag...........New gear case and hub installed. The videos produced by AppliancePartsPros are quite helpful, even though the video was not of the exact make and model number I was repairing, the similarities were so great that it may as well have been the same make and model number (whirlpool and Maytag essentially make the same thing and slap I different sticker on them)
Read more
More
$51.95
- Compare At:
-
$61.82
- You Save:
-
$9.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285512
Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.
Do-It-Yourself Stories from Customers like You
Temperature control switch failed to cold only. Marilyn M. • Summerfield , FL • September 30, 2017
Replaced with a new one.
Read more
More
$81.51
- Compare At:
-
$97.81
- You Save:
-
$16.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8533540
Fix agitator not working or washer won't spin. This spring retainer secures the tension spring in your agitator assembly. Easy 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Agitator dogs worn & inner cap seal brittle. Natalie T. • Roosevelt , UT • August 05, 2017
Replaced dogs & cap seal. I also replaced Spring retainer since it was worn and I had it apart. Easy repair. Used a screwdriver to pop off fabric softener cap. socket to remove the agitator. I used a flathead screwdriver to remove the spring from the retainer. I cleaned everything and reassembled. It was a very easy repair. Saved at least $100. doing it myself.
Appliancepartspro.com is fast. I will buy from them in the future. Thanks guys!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8578210
Agitator not working or spinning freely? This upper auger assembly restores the one-way ratcheting action for proper clothes rollover and cleaning.
Do-It-Yourself Stories from Customers like You
Agitator was not working Kenneth H. • Cleveland , TX • March 21, 2016
Ordered a agitator
Read more
More
$115.79
- Compare At:
-
$138.95
- You Save:
-
$23.16