Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore Washer 110.29852991 (11029852991, 110 29852991) Parts

Switch Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

  • Loose or rattling switch within the console face  
  • Difficulty selecting cycles as buttons wobble out of place
  • Water intrusion hastening corrosion of electrical terminals
  • Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Neptune mah4000 had a no spin but did pump water out but not all of it   Guillermo S. • Chicago , IL • March 06, 2017

I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Outer Tub Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 3361596

Outer tub assembly for your washer. Houses the inner basket and holds water during wash cycles. Replace if cracked, leaking, or damaged.

More
$638.69
Compare At:
$969.84
You Save:
$331.15

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Wire Connector Block
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876590

Wire connector block for washers. Transfers electrical connections between wiring harnesses. Replace if connector housing is cracked or melted.

More
$7.72
Compare At:
$8.15
You Save:
$0.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Gasket Sealer Adhesive
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285195

Gasket sealer adhesive for dryers and laundry appliances. Bonds and seals gaskets during installation or repair. Replace when worn or missing.

More
$62.95
Compare At:
$74.28
You Save:
$11.33

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Motor Shield
Genuine Whirlpool part
By: Whirlpool
Part Number: W10838408

Rusted or missing motor shield letting debris reach your washer motor? This protective cover blocks foreign objects and secures the motor assembly. DIY repair.

Do-It-Yourself Stories from Customers like You Rusted motor shield that had rotted away   James N. • Gastonia , NC • February 16, 2015

The repair was simple. Having used Appliance Parts Pro in the past for much needed repair parts, I simply unplugged the machine, turned off the water and removed the drain hose and slid unit forward. I then removed the top control panel like last time, tilted the body forward and set it aside. I unfastened the upper hose to the water pump and slid what was left of the old shield out and slid the new replacement shield back into place then reattached the flex hose. The shield slipped right... Read more

More
$23.95
Compare At:
$28.50
You Save:
$4.55

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Agitator Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3362061

If your washer agitator is loose, rattling, or missing its top cover, this agitator cap secures the assembly and restores proper function.

More
$48.48
Compare At:
$57.69
You Save:
$9.21

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Rear Panel Pad (Insulation)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62747

Rear panel pad cushions and insulates the appliance's rear cabinet to reduce vibration, noise and rubbing against the back panel. Replacing a damaged pad helps stop rattles and protects internal components from wear. What it does:

  • Provides rear-cabinet cushioning and thermal/abrasion protection for the back panel.
  • Dampens vibration and reduces operational noise.
  • Prevents direct metal-to-metal contact that can cause rubbing or wear.
  • Common symptom fix: reduces rattling or vibrating noises from the appliance rear.
What's included: One rear panel pad. Install notes:
  • Always disconnect power (and gas, if applicable) before starting any repair.
  • Remove the rear access panel to access the pad; replace using the original mounting points, adhesive or clips.
  • Inspect surrounding insulation and mounting hardware; replace any damaged fasteners.

More
$15.95
Compare At:
$18.98
You Save:
$3.03

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Drain Hose Coupling Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285442

Connects the drain hose to the washer drain outlet. Replace this coupling kit if cracked, broken, or leaking to restore a secure connection.

More
$49.40
Compare At:
$58.29
You Save:
$8.89

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Hardware Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285654

Assorted fasteners, clips, and hardware for washer repairs. Replace missing or damaged clips during panel removal or component service. Verify fit with your model.

More
$14.45
Compare At:
$17.20
You Save:
$2.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Tube Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: 357030

Use with motor 357282.

Do-It-Yourself Stories from Customers like You Whirlpool washer making a whining noise while going to spin cycle   Micheal S. • Clermont , GA • August 05, 2015

Replaced the clutch and water pump Read more

More
$14.56
Compare At:
$17.33
You Save:
$2.77

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Touch Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 72110

Touch up paint for appliances with chips, scratches, or worn spots. Includes brush applicator. Restores finish on damaged surfaces. 0.6 fl oz.

Do-It-Yourself Stories from Customers like You My problem was not an appliance; it was a harvest gold bath tab we had patched a crack in the bottom of the tub and it left a big ugly brown spot   Deborah N. • Georgetown , SC • July 17, 2014

I ordered harvest gold touch-up paint and painted over the area. So far, the paint staying and I think it looks fine. This surely beats replacing the whole tub! Read more

More
$16.35
Compare At:
$19.62
You Save:
$3.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Motor Mount Plate
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62611

Motor mount to gear case.

More
$52.95
Compare At:
$62.48
You Save:
$9.53

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Connector Block (Cold Valve)
Genuine Whirlpool part
By: Whirlpool
Part Number: 3354925

 

More
$15.60
Compare At:
$18.56
You Save:
$2.96

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Terminal Receptacle (3-Way)
Genuine Whirlpool part
By: Whirlpool
Part Number: 353424

For mating plug use 691707.

More
$15.60
Compare At:
$18.56
You Save:
$2.96

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Touch Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344

Color: White. Size: 1 qt. can. Acrylic appliance paint.

More
$100.95
Compare At:
$119.12
You Save:
$18.17

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Harness Retainer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP389379

Harness retainer secures wiring harnesses inside your washer cabinet. Replace if cracked, broken, or missing to properly route and protect wires.

More
$5.95
Compare At:
$7.08
You Save:
$1.13

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store