Poulan Blade

Secures the mower blade to the motor shaft. Replace if adapter is worn, stripped, cracked, or no longer holds the blade firmly in place during use.

Connects mower blade to spindle for secure attachment. Replace if stripped, cracked, or worn to ensure blade stays properly mounted during operation.

This 50-inch blade is made for use with riding lawn mowers by Craftsman and Husqvarna. The blade is the component that is responsible for cutting grass or other foliage when the lawnmower is in use. The blade can become worn over time and will leave grass with frayed edges. If the blade is worn out, it will need to be replaced to create a healthier-looking lawn. Replacing the blade will create a clean cutting edge after regular use of a lawnmower.If the mower blade needs to be replaced, a pair of pliers, a socket set, and a wrench set will be required. Place the lawnmower on a stable surface and pull up the blade deck for better access to the 50-inch blade. Take out the blades and the sheared pins before replacing them with new components. Reassemble the deck and test the lawnmower before use.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as a single part. The 50-inch blade is made to be used in several lawn mowers and lawn tractors manufactured by Husqvarna and Craftsman.

Replace your worn, bent, or dull riding mower blade. This 21-inch high lift blade installs on the deck to cut grass and improve bagging performance.

Mulching blade for walk-behind lawn mowers. Replaces worn, bent, or dull blades that no longer cut effectively. Installs on the mower deck spindle.

46-inch mulching blade for riding mowers and lawn tractors. Replaces worn, bent, or damaged blades. Finely cuts grass clippings for decomposition.

Scraper bar installs at the base of your snowblower auger housing to scrape packed snow from walkways and driveways. Replace if cracked or worn down.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

Rotating cutting blade that attaches to the lower mower deck. Replace when blade edge is cracked, bent, excessively worn, or missing for clean cuts.

Replacement cutting blade for hedge trimmers. Metal teeth contact cutting surface and can break, chip, or wear over time. Installs on trimmer head.

Replacement blade holder for riding mowers and lawn tractors. Securely mounts and holds the cutting blade to the spindle assembly. Replace if cracked or worn.

Replacement cutting blade for riding mowers and lawn tractors. Installs under the deck to cut grass. Replace if blade is bent, cracked, or worn.

Note: This is ONE blade.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

Replacement edger blade for lawn edgers that trim grass along sidewalks and driveways. Replace if blade is bent, chipped, or worn from pavement contact.

This part is the mulching blade. This mulching blade is designed to be used on riding lawnmowers and tractors. Mulching blades circulate the grass longer when clipping so that the clippings are smaller. These smaller grass clippings are perfect for mulching because their smaller size lends them to faster decomposing, which in turn puts the nutrients into the soil faster.A new mulching blade may be needed if the blade has been broken or damaged in any way. Mulching blades can be sharpened when they become dull, but it is recommended that they be replaced about approximately 100-200 hours of mowing time. Replacing mulching blades is an easier alternative to sharpening dull ones.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This mulching blade is compatible with riding lawn mowers and lawn tractors manufactured by either Husqvarna or Poulan.