Parts for Bosch WFMC3200UC/01: Pump Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fix washer water level issues or won't fill correctly with a new pressure chamber. This part regulates water sensing for proper fill cycles.

Fix washer drainage issues with this sump check ball. Prevents water backflow in the pump system. Simple DIY repair for most home mechanics.

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

• Holds mating parts together to prevent wobble, vibration, or dislocation
• Keeps seals and assemblies properly seated to reduce noise and misalignment
• Helps maintain correct component spacing for smooth operation
• Commonly replaced when the original ring is bent, worn, or missing

• Designed for use with compatible OEM assemblies; follow for correct placement
• Inspect mating surfaces and replace any damaged clips, seals, or gaskets before reassembly
• Use proper tools to avoid deforming the ring during installation; do not force into place
• Disconnect power and follow safety procedures before servicing the appliance

Fix washer leaks or uneven water flow with this T-connector. Joins three water lines to restore proper distribution. Simple DIY repair.

This clamp secures hoses and small tubing to fittings, helping prevent leaks and keeping connections stable for proper appliance operation. It's a simple replacement for worn or loose hose fittings. What it does

• Holds hose or tubing to a barb or fitting to prevent slipping and leaks
• Restores a secure, vibration-resistant connection to reduce rattling
• Commonly replaced when hoses show movement, leakage at the connection, or a loose fit

• Disconnect power and water supply before starting any repair
• Remove the old clamp and position the new clamp over the hose barb, then tighten or compress as appropriate for the clamp style
• Use the correct tool (screwdriver, nut driver, or pliers) and avoid over-tightening to prevent hose damage
• Inspect the hose and fitting for damage; replace damaged hoses before reassembly

Secures washer hoses to direct water flow properly. Replace if leaking, loose, or showing wear from age or chemical exposure. Confirm fit with model.

Secures water hoses in your washer to prevent leaks. Replace if cracked, rusted, or causing drips. Verify fit with your model number before ordering.

Secures washer hoses to prevent leaks. Replace if cracked, loose, or causing water seepage. Verify compatibility with your washer model before ordering.

Secures hoses in your washer to prevent leaks. Replace if loose, corroded, or leaking at connections. Verify fit with your model number before ordering.

Secures washer hoses to prevent leaks. Replace if loose, cracked, or causing water leakage during wash cycles. Verify fit with your model number.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Cold Water Inlet Valve is an OEM part for Bosch washing machines. It is designed to regulate the flow of cold water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board, ensuring the right amount of cold water is provided.

Causes of a faulty cold water inlet valve can include wear and tear over time, clogs or blockages in the valve, electrical issues, or valve failure.

Symptoms of a bad cold water inlet valve may include:

• Insufficient or no cold water flow into the washing machine
• Leaking or dripping water from the valve during the wash cycle
• Inconsistent or inadequate water supply for washing clothes
• Error codes related to water supply or filling

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: For the Hot Water Valve, order part number 00422245.

The Hot Water Inlet Valve is an OEM part for Bosch washing machines. It regulates the entry of hot water into the machine, crucial for cycles requiring warm or hot washes. Activated by the machine's control system, this valve opens at the precise moment to allow the correct amount of hot water to mix with the cold, ensuring the selected temperature setting is accurately achieved. 

The causes behind issues with the hot water inlet valve often include sediment build-up from hard water, wear and tear from regular use, or electrical failures preventing the valve from operating.  

Symptoms of a malfunctioning Hot Water Inlet Valve include:

• Water that is too cold 
• No water entering the machine 
• Leaks around the valve area 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the mounting and connection hardware used during appliance installation
• Helps prevent loose fittings and reduce leaks caused by improperly secured components
• Useful when original installation parts are missing or damaged
• Supports a proper, stable installation for safe operation

• Follow the appliance's installation instructions and local codes when installing this kit
• Turn off power and water supply before beginning work
• Use appropriate tools and verify all connections are tight and leak-free after installation

If your washer isn't heating water properly or cycles run incorrectly, the temperature sensor may have failed. This thermistor monitors water temp.

Directs water from your home supply into the washer. Replace if cracked or leaking to restore proper fill and prevent water damage. Confirm fit with your model.

Fix washer overfilling or not filling properly with a new pressure switch. Monitors water levels during fill cycles. Common DIY repair for fill issues.

Fix washer overfilling or fill errors with this pressure chamber hose. Restores proper water level sensing by connecting the sump to the pressure chamber.

Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.

The Cold Water Inlet Hose is an OEM replacement part for Bosch washing machines. It serves as a flexible supply line that delivers cold water from an external plumbing source directly to the washer. This hose plays an important role in providing a balanced mix of hot and cold water flow into the unit.

Symptoms of a bad cold water inlet hose include:

• Fluctuations in water temperature during cycles  
• Issues with certain temperature settings like warm or cold not operating properly
• Visible cracking, kinking, or leaking along the hose body
• No water flow or pressure at the cold supply 

Causes of a failed cold water inlet hose can be mineral deposits clogging the line, natural wear and tear over time, or physical damage from crushing or abrasive surfaces compromising its integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.

This replacement hose connects the dishwasher drain/sump to the drain system, restoring proper water removal and preventing leaks or standing water. It's a direct-fit service part when the original hose is cracked or clogged. What it does

• Carries waste water from the dishwasher sump to the household drain or disposal
• Restores proper draining when a split, collapsed, or clogged hose causes standing water
• Helps stop leaks and puddling that can occur from worn or damaged hose sections
• Maintains correct flow to prevent dishwasher error codes related to drainage

• Turn off power and water supply to the appliance before starting any repair
• Inspect hose routing and clamps; replace any damaged clamps or retainers for a secure seal
• Ensure hose connections are tight and routed without kinks to allow proper drainage

Secures and supports internal components in your washer. Replace if the holder is cracked, broken, or missing to restore proper assembly and function.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.