Carl B January 19, 2014 for Model Number ESS25XGMC BB The prefilter button keeps beeping and lights are coming on and off. Its doing this off and on. It may do this for long periods of time, then it may not do it for a day or so. Is there something wrong with the interface or the control board?
1 Answer Carl, If the filter indicator light is coming on and the control is beeping then it sounds like the dispenser interface WR55X10517 is faulty and would need to be replaced. Read More...
Casey K November 17, 2013 for Model Number GSS22SGRF This may be two different issues that happened to occur at the same time, but they seem related. Ice/water dispenser quit working after the ice cube bin got way too full. Makes ice just fine still, and ice making turns on and off with the switch there. Freezer light turns on and off with the door switch. The selection light still functions, and changes with your choice, but nothing else works. After this started, we noticed a deep clicking sound that continues until a compressor sound kicks in. The lights inside will flicker with each click and depressing the ice dispenser bar in the door seems to stop the clicking and help the compressor kick in. We took the panel off the back, and the clicking seems to be coming from the lower right area of the circuit board. We tried unplugging it for a period of time (an hour?) but that seemed to make it even harder to kick over. Other than this, the compartments are cooled appropriately.
1 Answer Casey, There are 2 different issues be most likely equate to the same problem. The issue would most likely be caused by a faulty control board. When the compressor relay is clicking it means that the relay is going bad and eventually will not work at all. You would want to replace the control board WR55X10942C. Read More...
Bob April 27, 2013 for Model Number gsh25sgpcss My display panel (WR55X10517) doesn't seem to have power, so I have a couple of questions: 1. What leads should I be checking to confirm there is not power to the panel? 2. If power isn't getting through, is there a schematic somewhere that shows where those wires lead to?
1 Answer Bob, You would check across the red and white wires for DC voltage. If there is no power then you would want to check the wire harness at the bottom or top of the door to make sure that there are no loose or broken. Read More...
James W January 26, 2013 for Model Number gss22sgrfss No water or ice out of door. Makes ice inside and no light outside the door when you push button. When you try getting ice or water it turns the refrigerator off. Is it the controll board on the outside of door.
1 Answer Hello James, This would more than likely be the user interface that would be causing issue. You will want to also check the connector at the bottom or top of door to make sure that there is no loose or broken wires. Read More...
Arian July 14, 2012 for Model Number WR55X10517 NO ice or water is comming out of the dispenser. Ice is been made inside. the dispenser will work for a week or so, then will go bad for almost a month, and so forth. I already changed the motherboard on the back of the fridge but this did not fix the issue. Do you think changing this front motherboard will solve my problem?
1 Answer Hello Arian. No, based on the information you provided it either sounds like the water valve is bad or the water is freezing inside the freezer door. Next time it does not work, remove the water line from the bottom of the freezer door and see if water comes out there. If so, the line inside the door is frozen and will need to be thawed out. Read More...
Jim April 22, 2012 for Model Number gss22gsdm Ice and crushed buttons work and beep when pressed but water button does not light up or beep when pressed. Would like to know if this is the interface above or the control board in the back? Would like the pin outs to check the control card to see if switch signals are coming through. Thanks.
1 Answer Hi Jim. I would use the digital capacitor Tester / Volt/ohm meter part # MA-DM1 to assist you in repair. The keypad is complete with the fountain control board part # WR55X10517. We will send the G.E. board instructions as needed. Thank You. Read More...
Robert April 12, 2011 for Model Number GSH25KGMC BB Does this part (AP3855823) come with the control board on it also (like the picture)?
1 Answer Hello Robert! Yes, the dispenser interface WR55X10517 includes the electronic board. Thanks! Read More...