1 Answer Hello Tony. This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use the following links to assist in your repair: http://forum.appliancepartspros.com/dishwasher-repair/3620-do-i-need-special-tool.html and http://forum.appliancepartspros.com/dishwasher-repair/188387-impeller-removal.html . Hope this helps! Read More...
Kevin March 31, 2011 for Model Number 665.17669400 -Kenmore Dishwasher Oh, ok I already have that off. I know you say that the impeller pulls off now, but I cant get it to pull off. I have even pulled the shaft assembly out of the motor to keep from spinning.
1 Answer Hello Kevin. Here is a link to the picture of the motor WP8283457. You can see the D shaft it slides off of. These can be tight. Hope this helps. Read More...
Kevin March 31, 2011 for Model Number 665.17669400 -Kenmore Dishwasher What do you mean by the front disc?
Kevin March 31, 2011 for Model Number 665.17669400 -Kenmore Dishwasher How do you remove the impeller from the pump motor shaft?
1 Answer Hello Kevin. These parts will pull off the D shaft. You will need to remove the front disk located on the front of the motor to do this repair. Hope this helps. Read More...
George March 11, 2011 for Model Number tud5000y2 Impeller seal is leaking. I've removed the pump and motor. How do I remove the impeller from the motor shaft?
1 Answer Hello George. These parts will pull off the D shaft. You will need to remove the front disk to do this repair. Hope this helps. Read More...