Snider January 02, 2014 for Model Number Maytag Jet Clean 2: MDB7600AW When close the door the Rinse Only light flashes and tries to rinse the dishes. We can't push another button. If we unplug the unit for a few minutes and plug it back in, we can push the various buttons fine but we have to repeat the process on the next load. What is wrong? and what parts do we need?
1 Answer Snider, Based on the description it sounds like the issue would be caused by a stuck keypad on the control panel. You will also want to check for loose connection. If the connection is good then replace the control panel. Read More...
Bobby December 29, 2013 for Model Number Mdbh945aws Handle that opens door broke on the inside. Do I have to buy the whole control panel or is there a way to replace handle only
1 Answer Hello Bobby, You will need to replace the door latch assembly WPW10130695. This is done bu turning the power to the unit off and opening the door panel. Read More...
Christine November 30, 2013 for Model Number MDB7600AWB The touch pad has gone crazy. Sometimes lights come on and flash. Can't get lights to stop flashing and dishwasher will not start no matter what I press. Sometimes no lights come on. What could be the problem. What part do I need and how do I replace it? Take apart the door? Thank you
1 Answer Hello Christine. You will need to order and replace the control panel on the unit. You will need to take the door apart to replace the control panel on the unit. Read More...
Harry September 25, 2013 for Model Number Mdbh945awb3 Some times the lights won't go on and won't turn on when it gets cold it runs
1 Answer Hello Harry. Check all wiring connections and make sure they are good and tight. If so, you will need to order and replace the control board in the unit. Read More...
Deb C. September 08, 2013 for Model Number MDB8600awb I am having the flashing '9' problem and cannot select another program to wash the dishes. You have suggested the control panel (not the board) needs replacing in this case. What if I order it, put it in and it does not repair the problem. Would this be a case of a return being accepted by you? Thanks!
1 Answer Hello Deb, Our 365 day return policy is for any reason. You can return the part, whether installed or not, at any time within 365 days from the date of order. Read More...
Kylie August 03, 2013 for Model Number mdb8600aws When I try and start my dishwasher it wants to only run the rinse cycle and won't let you select any other cycle. Sometimes you can select a different cycle and in about 30 seconds it switches back to the rinse cycle. I'm thinking it's the control board, but I'm not sure at this point.
1 Answer Hello Lylie. Based on the information you provided, it sounds like the control panel 6-917713 is bad and will need to be replaced in the unit. Read More...
David V July 06, 2013 for Model Number Mdb8600awq I have a MDB8600AWQ dishwasher where the cancel button will not work and the display time doesn't appear while the machine is running. The display has gone through the similar situation before but a few weeks later, it started to work again. I was wondering what I should look into next. I just replaced the door lock and was finishing the cycle after installing it.
1 Answer Hello David. It sounds like the control panel 6-917713 is bad and will need to be replaced on the unit. Read More...
Pete June 26, 2013 for Model Number MDBTT79AWW Last year I replaced the control panel. Months ago the buttons started to only sometimes work. Now, the panel will not respond at all. I opened it up and saw that on the ribbon that connects the control panel to the control board had brown marks where the light colored wires are where the ribbon connects into the control panel. The connection to the control board seemed fine. Does this mean I need a new control panel? Any idea why this is happening?
1 Answer Pete, You can try to clean the contacts on the ribbon harness with a contact cleaner or rubbing alcohol. If this does not resolve the issue then you would need to replace the control panel 6-917713. Read More...
Carol June 09, 2013 for Model Number MDBH945 serial #NW5113568 Our dishwashers start button does not work. Other functions will light up but won't start. It seems to shut tight and latch seems to work well. Do we need a control board or touch pad? Have some machines you can't replace just one it is a combination deal. Please advise. Thanks
1 Answer Hello Carol. Make sure the door switches are good on the unit and if so, you will need to order and replace the control panel on the unit. Read More...
Jim May 15, 2013 for Model Number MDB8600AWS My maytag dishwasher shows all lights flashing on control panel, the numbers keep flashing from 50 down to 1 and then back up to 50. I shut the circuit breaker and then re-open and all lights are reset. I am able to run the dishwasher fine, dishes come out hot and clean, however after load is done (maybe 15 minutes later) all lights start flashing again. I am guessing that touchpad and control panel may need to be replaced soon. If I order the parts, do you have a video on your website I can view on how to do install this or do instructions come with the parts?
1 Answer Jim, It sounds like you have a stuck keypad which is part of the control board 6-917713. To remove the control panel you will need to take the screws out of the inner door panel. Once removed lift door panel up and there will be 4 1/4" screws that hold the control panel in place. These will need to be removed along with other components in the control panel to switch over to the new. Read More...