Pradeep March 29, 2012 for Model Number mdbf550awb Hi there, I have a maytag series 100 dishwasher. If I push any of the cycle buttons (normal wash, heavy, etc), the lights will turn on but when I hit the start/stop button nothing happens. From time to time, if I turn off the power for 24 hrs or more, then maybe it will work for 1 cycle. Any thoughts? Thanks.
1 Answer Hello Pradeep. Based on the information you provided, it sounds like the control panel 6-917726 is bad and will need to be replaced on the unit. Hope this helps. Read More...
Don January 26, 2012 for Model Number Mdbtt59awb Hello I have replaced handle switch and circuit board and still no lights on panel and nothing works . Do I need a panel instead Of the circuit board. I do have power to the switch and board . Hope you can help thanks Don
1 Answer Hello Don. Yes, based on the information you provided, it sounds like the control panel 6-917726 is bad and will need to be replaced. Hope this helps. Read More...
1 Answer Hello Melissa. We will need your serial number to provide you the age of the appliance. Thank you. Read More...
Chastity November 26, 2011 for Model Number mdbh950awq Every button on my control panel works except for the start/cancel button. Any ideas?
1 Answer Hello Chastity. Based on the information you provided, you will need to order the control panel 6-917726. Check and make sure the door switches are good in the unit. Hope this helps. Read More...
Kathy E. August 14, 2011 for Model Number MDBTT59awb My door latch borke and also the control panel has now big chuck out of the middle...does this panel have latch and all?
1 Answer Hi Kathy.You need the control panel assembly part # 6-917726. The latch assembly is part # WPW10130695. These are black parts. Make sure that the unit is releveled as it explains in the installation guide. Thank you. Read More...
John June 12, 2011 for Model Number MDBTT59AWB This dishwasher was purchased in 2004. The handle is broken and pieces have broken off of the control panel. Is the handle molded to the panel as that is how my panel was manufactured?
1 Answer Hello John. No, the handle is attached to the latch assembly WPW10130695. It is not molded to the control panel 6-917726. If the panel and the handle is broke, you will need to replace both parts. Hope this helps. Read More...