Dish Pan Hands August 27, 2017 for Model Number whirlpool DU1055XTB4 My dishwasher is flashing clean all the time. The only other button that works is the cancel/drain. The pump seems to work (but of course there is no water to pump out) then it goes right back to flashing clean again. Help please!
1 Answer Hello. This is a heat error. You will need to run it through diagnostics to clear the code. Then test and locate the error in the heating cycle. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Toby March 20, 2017 for Model Number MDB4630AWB5 My dishwasher will not heat water. The heating element tested fine and I replaced the thermostat, but still no hot water. This Maytag unit runs but does not clean dishes very well. Control board issue or something else?
1 Answer Hello Toby. Yes, based on the information you provided, the control board is bad and will need to be replaced on the unit. Read More...
Roy December 01, 2016 for Model Number du1055xtv88 The washer repeats wash cycle several times and doesn't go to next stages.
1 Answer Hello Roy. You will need to order and replace the control board WPW10285180 on the unit it sounds like. Read More...
Mark S. July 23, 2015 for Model Number KUDI24SEBL1 Would a faulty panel switch cause the dishwasher to stop in between cycles and possible not drain?
1 Answer Hello Mark. No, it sounds like the control board WP8051136 on the unit is bad and will need to be replaced. It is not likely for the switch panel to be causing the issue. Make sure your heating components are good on the unit. Read More...