Refrigerator Spring Parts
Genuine Ge part
By: Ge
Part Number: WR30X10093
Ice maker not producing ice or stopped working? This ice maker kit restores ice production. Includes full assembly for harvesting and ejecting ice.
This part fixes the following symptoms
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
No ice and leaking water Jeff P. • Pinecrest , FL • November 01, 2019
Much easier than expected, I was certain it had to be a water line but the solved everything
Read more
More
$189.33
- Compare At:
-
$223.41
- You Save:
-
$34.08
Genuine Ge part
By: Ge
Part Number: WR02X10585
Spring that provides closing tension for the refrigerator water/ice dispenser door flap. Keeps the dispenser sealed when not in use. Replace if door hangs open or won't close.
This part fixes the following symptoms
-
Door latch failure
-
Ice maker not making ice
-
Not dispensing water
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Ice flapper door stopped closing Lawrence D. • Holly Springs , NC • March 21, 2016
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser...
Read more
More
$9.75
- Compare At:
-
$11.60
- You Save:
-
$1.85
Genuine Lg part
By: Lg
Part Number: 4970JA3011K
Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.
Do-It-Yourself Stories from Customers like You
Ice forming under ice maker and around the chute Robin A. • San Diego , CA • November 29, 2014
The ice chute flap wasnt closing.
1. I turned off power
2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in
3. Disconnected the front panel
4. Unscrewed the next panel to allow access to the chute flap
5. Removed 1 screw holding complete flap and mechanism and replaced with new
6. Re installed all parts in reverse
Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return...
Read more
More
$14.66
- Compare At:
-
$17.59
- You Save:
-
$2.93
Genuine Ge part
By: Ge
Part Number: WR02X12256
Spring that controls dispenser arm movement in refrigerators. Installs on the paddle assembly. Replace if broken, detached, or missing to restore arm function.
Do-It-Yourself Stories from Customers like You
The ice dispenser on my GE refrigerator would no longer activate the switch to dispense ice nor water James T. • Ft. Thomas , KY • November 18, 2018
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them
Read more
More
$10.43
- Compare At:
-
$12.41
- You Save:
-
$1.98
Genuine Ge part
By: Ge
Part Number: WR1X2027
Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.
Do-It-Yourself Stories from Customers like You
Freezer door would not close well Juan D. • Rio Grande , FL • September 19, 2014
I replaced the lever asm. and spring
Read more
More
$37.41
- Compare At:
-
$44.52
- You Save:
-
$7.11
Genuine Ge part
By: Ge
Part Number: WR02X12948
The Spring Closure is an OEM part for GE refrigerators. This spring aids in the automatic closing of the refrigerator door, ensuring it seals tightly after each use to maintain optimal internal temperatures.
Causes of a bad spring closure can include regular wear and tear, corrosion due to moisture, or accidental damage that compromises its function.
Symptoms of a bad spring closure include:
- The refrigerator door not closing completely or staying ajar
- Difficulty in opening or closing the door smoothly
- Increased energy consumption as cold air escapes
- Frost buildup around the door seal area
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ge monogram refrigerator broken spring closure Francis M. • Clarence Center , NY • June 27, 2014
1) Remove toe kick panel - 2 Philips head screws
2) Lay down on floor. This might be the hardest part of the repair from some people!
3) Remove broken spring, no tool required.
4) Using your fingers, slip one end of new spring into hole on lever arm. (If you're not sure how it should go, look at the spring on the other door, assuming you have a side-by-side.)
5) Hook the other end of the spring around a round-shank screwdriver. (Don't even bother with pliers. You will disregard this advice...
Read more
More
$32.95
- Compare At:
-
$39.54
- You Save:
-
$6.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 241688901
Torsion spring that returns the dispenser ice chute door to closed position. Replace if broken, weak, or missing to restore proper door closure.
Do-It-Yourself Stories from Customers like You
Ice maker door not sealing causing frost buildup and leaking Richard B. • Shoreline , WA • October 11, 2016
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time.
Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical...
Read more
More
$15.95
- Compare At:
-
$19.14
- You Save:
-
$3.19
Genuine Ge part
By: Ge
Part Number: WR02X11768
The Ice Deflector Spring is an OEM replacement part for GE refrigerators. This spring is a crucial component of the ice dispensing system, specifically in selecting between crushed and whole ice cubes. It is designed to always force the diverter back in a way that the cubes get crushed. When whole cubes are selected, the solenoid pulls the lever against the spring’s tension to shift the configuration, allowing cubes to bypass the crusher blades.
Causes for a malfunctioning Ice Deflector Spring can include wear and tear from regular use, corrosion due to constant exposure to moisture, or mechanical failure that prevents it from effectively reverting the diverter to the crushed ice configuration.
Symptoms of a bad Ice Deflector Spring include:
- The ice dispenser only dispensing whole cubes, even when crushed ice is selected
- The diverter not returning to the crushed ice configuration
- Unusual sounds during the ice dispensing process
- The need for manual intervention to get crushed ice
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Not dispensing ice, making loud noise Dennis V. • Parker , CO • March 24, 2020
When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair.
Read more
More
$16.38
- Compare At:
-
$19.33
- You Save:
-
$2.95
Genuine Ge part
By: Ge
Part Number: WR01X10255
Spring should have GOLD color.
Do-It-Yourself Stories from Customers like You
Door would not self close wheel in top door closure assembly was worn flat Daniel B. • Carlsbad , CA • November 16, 2014
Downloaded the Technical Service Guide and followed the instructions for removal of the Door Closure Mechanism.
Items the instructions failed to mention:
1. Although they took the trouble to call for removal of a 3/16" Allen head bolt, they referred to the closure mounting bolts as just "bolts". In fact, they were T-25 bolts. If I didn't have a Torx kit, it would have required a trip to the Orange Big Box Home Center to complete the job.
2. Although the instructions don't describe this step,...
Read more
More
$22.35
- Compare At:
-
$26.37
- You Save:
-
$4.02
Genuine Whirlpool part
By: Whirlpool
Part Number: 61004388
Replacement spring for refrigerator ice dispenser chute door. Restores closing tension when original is fatigued, broken, or missing. Installs on strike arm.
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The ice door would not close all the way and would allow air to go up to the ice storage compartment this would cause a frosty build up which interfered with getting ice to come down the shute Thomas C. • Iowa , LA • August 29, 2015
We ordered the Ice Door Fountain Kit and ice door spring, which was delivered to our home within three or four days. I understood everything about how to change it except the placement of the
spring. A video on your website showed exactly how to put the spring in place and helped me get the job done quickly. It solved our problem and we really appreciate your services.
Read more
More
$11.95
- Compare At:
-
$13.11
- You Save:
-
$1.16
Genuine Samsung part
By: Samsung
Part Number: DA61-20128C
The Refrigerator Fan Blade Spring is designed to maintain the proper tension and alignment of your refrigerator's fan blades, ensuring efficient airflow and optimal cooling performance. This essential component plays a crucial role in the smooth operation of your Samsung refrigerator, preventing noisy vibrations and maintaining consistent temperature control. Made as a genuine OEM part, it guarantees a perfect fit and reliable performance, matching the quality and standards of your original appliance parts. Compatible with a wide range of Samsung refrigerator models, this fan blade spring is easy to install, allowing you to restore your fridge's functionality without hassle. By replacing a worn or damaged spring with this authentic part, you can enhance the longevity and efficiency of your refrigerator, providing a better cooling experience for your food storage needs. Trust in the Refrigerator Fan Blade Spring to deliver the dependable performance your Samsung refrigerator requires.
Do-It-Yourself Stories from Customers like You
Evaporator fan noise William O. • Oakmont , PA • December 18, 2014
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge.
Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing.
Read more
More
$0.83
- Compare At:
-
$2.00
- You Save:
-
$1.17
Genuine Ge part
By: Ge
Part Number: WR02X12059
Restores closing tension for refrigerator ice dispenser recess door. Replace if spring is weak, broken, or missing to keep door closing properly.
Do-It-Yourself Stories from Customers like You
Ice maker door door solenoid rusted out changed all parks in there including ingredients flapper hinge and spring Ron S. • Massapequa , NY • September 06, 2016
I used the video posted on site...note on my model trim bezel did not have to be removed!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241689001
Small spring that provides return tension for refrigerator actuator lever mechanisms. Replace if spring is broken, stretched, missing, or lost during repair.
More
$16.58
- Compare At:
-
$19.73
- You Save:
-
$3.15
Genuine Samsung part
By: Samsung
Part Number: DA61-20140A
Replacement door spring for refrigerators. Provides proper tension for smooth door operation. Replace if worn, stretched, or broken to restore door function.
More
$1.42
- Compare At:
-
$2.00
- You Save:
-
$0.58
Genuine Frigidaire part
By: Frigidaire
Part Number: 241731801
Control rod spring for refrigerator ice maker shutoff arm. Restores proper tension to control ice production cycles. Replace if spring is missing, broken, or worn.
More
$10.70
- Compare At:
-
$12.73
- You Save:
-
$2.03
Genuine Samsung part
By: Samsung
Part Number: DA61-00565A
Spring that secures the ice cover assembly in your refrigerator. Replace if the original spring is stretched, broken, or missing to restore proper tension.
More
$6.95
- Compare At:
-
$8.27
- You Save:
-
$1.32
Refrigerator Spring replacement parts are essential for keeping your fridge running smoothly. These small yet crucial components play a significant role in maintaining the functionality of your refrigerator, ensuring you always have fresh food and cold drinks when you need them.
Refrigerators are indispensable appliances in our homes, and having reliable refrigerator parts helps avoid major disruptions. When a spring in your refrigerator wears out or breaks, it can affect everything from the door seal to the internal mechanisms. Finding quality refrigerator parts is essential for seamless operation.
Opting for OEM replacement parts is always a smart move. These parts are manufactured to fit your specific refrigerator model, ensuring they work perfectly and last longer. With original equipment manufacturer parts, you can rest easy knowing you've chosen quality and compatibility for your appliance.
Whether you're doing a bit of preventive maintenance or need to replace a broken part, remember that quality refrigerator Spring parts are readily available to help keep your fridge performing at its best.
More