Parts for Crosley CRSE264FSS3: Refrigertor Door Parts

Door gasket seals refrigerator to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit by model number.

Door gasket seals refrigerator to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit by model number.

Replace your cracked, broken, or missing refrigerator bottom door bin. Snaps into door grooves without tools. Clear storage for gallon containers.

The Dairy Door is an OEM part for Frigidaire side-by-side refrigerators. It provides a convenient sealed storage compartment at the refrigerator door to keep dairy and other perishables fresher longer. The dairy door protects items from temperature fluctuations due to frequent door openings. It measures about 14 inches wide by 6 inches high.

Causes of a bad dairy door can include cracks, punctures or other damage reducing insulation effectiveness. Warping or improper sealing due to age can also affect performance.

Symptoms of a bad dairy door include:

• Condensation or frost buildup inside the door
• Items inside spoiling more quickly than in the main refrigerator 
• Difficulty closing or sealing the dairy door properly

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Limits refrigerator door swing to prevent over-extension. Replace if broken, cracked, or missing to restore proper door alignment and protect hinges.

Limits how far the refrigerator door swings open. Replace this stop if it's worn, broken, or missing to protect the hinge and prevent door overextension.

This replacement refrigerator door restores the appliance's exterior panel and closing surface to proper condition, improving seal alignment and appearance. Use it when the original door is damaged, dented, or no longer closes flush. What it does:

• Replaces the outer door panel that covers the fridge cavity and supports door-mounted components
• Restores correct door alignment and helps ensure an even seal for proper cooling performance
• Replaces cracked, dented, or cosmetically damaged doors to improve appearance
• Provides the mounting surface for hinges, handles, and door shelves

• Remove food and any loose items from the door before beginning
• Door panels and assemblies can be heavy; have a helper to support the door during removal and installation
• Follow the refrigerator manufacturer's service instructions and use proper fasteners and alignment procedures

This outer refrigerator door replaces a damaged or dented exterior door panel to restore appearance and a proper seal. It provides a finished exterior surface and support for hinges and handles. What it does:

• Replaces a bent, cracked, or cosmetically damaged outer refrigerator door panel
• Restores proper door alignment and helps the gasket seal fully
• Stops drafts and reduces condensation that can result from a misshapen door
• Reinstates the appliance's finished exterior and provides mounting for hinges/handles

• One outer refrigerator door panel

• Installation requires removing the existing door and transferring hinges, gaskets, and any hardware as applicable
• Tighten hinge fasteners to manufacturer torque specs and verify proper door alignment for an even seal
• Disconnect power and remove contents from the door area before beginning work

This outer refrigerator door replaces a damaged or worn exterior door panel to restore appearance and proper sealing. It provides the structural outer shell for the fresh-food compartment and mounts to existing hinges and gaskets. What it does

• Replaces a cracked, dented or cosmetically damaged outer door panel
• Restores proper door alignment and helps maintain an effective seal
• Replaces a door with visible rust, corrosion, or extensive wear
• Helps eliminate drafts or improper closing caused by warped or damaged door surfaces

• Two people recommended; door assemblies are heavy and awkward to handle
• Disconnect power and empty door shelves before removal
• Support the door when removing hinge fasteners to prevent drops or injury
• Inspect and reuse existing hinge hardware, gaskets and trim unless replacements are specified

Bisque-colored door handle for side-by-side refrigerators. Replaces cracked, broken, or discolored handles. Mounts to refrigerator door exterior.

Secures panels, brackets, handles, and trim inside your refrigerator. Replace missing, stripped, or damaged screws to eliminate rattling and looseness.

This replacement screw secures designated components in your appliance to maintain a tight, rattle-free fit. Replacing missing or stripped hardware restores proper attachment and helps keep panels and trim properly aligned.

• Fastens specified parts to the cabinet or frame
• Helps maintain alignment of panels and trim pieces
• Replaces missing, stripped, or corroded screws
• Common symptoms: loose or vibrating parts, panel/trim won't stay secured, visible missing hardware

• Disconnect power to the appliance before servicing
• Hand-start threads to avoid cross-threading; use the correct driver
• Do not overtighten, especially when threading into plastic
• If replacing multiple screws, replace one at a time to maintain alignment

Upper door hinge bearing provides a low-friction bushing for the top hinge pin. Replace if worn, cracked, or causing squeaking sounds during door operation.

Plastic bearing that sits in the upper hinge, allowing the refrigerator door to swing smoothly and quietly. Replace if cracked, worn, or broken.

Replaces worn or broken refrigerator door hinge bearing. Installs between door and hinge bracket to support smooth opening and closing motion.

Replaces the door hinge bearing that fits into your refrigerator door. Needed when the original bearing is broken, cracked, or worn causing door issues.

Replace a cracked, broken, or missing handle trim on your side-by-side refrigerator. This decorative trim piece attaches to the door handle assembly.

Secures door handle trim to the refrigerator door. Replace if broken, cracked, or missing after impact. Clips into door trim and attaches to door.

Replace your cracked, broken, or missing refrigerator door bin. Restores storage space on your door for drinks and condiments. Easy slide-in installation.