Kenmore Compactor 665.1350593 (6651350593, 665 1350593) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 882699
Replace your trash compactor's broken or stripped drive gear assembly. Includes gears, shafts, and components that transfer motor power to the ram mechanism.
This part fixes the following symptoms
-
Compactor ram gets stuck
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Fractured drive gear Keith S. • Warrenton , VA • February 09, 2016
The compactor failed with the ram down, so the drawer wouldn't open which in turn made the mounting brackets inaccessible. This necessitated sliding a thin oscillating saw blade between the cabinet face frame and the counter top to cut through the brackets. It was then possible to roll the unit out and place it on its side. I removed the five screws holding the bottom pan in place, dropped the pan exposing the gear/chain train. The large gear was cracked from shaft out to the edge. One of...
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP777811
Fix a compactor ram that won't reverse or sticks at top position. This directional switch controls up/down movement. DIY repair in 15 minutes.
This part fixes the following symptoms
-
Doesn't stop at end of compacting cycle
See more...
Do-It-Yourself Stories from Customers like You
Compactor carriage traveled to bottom but would not return to top although motor would run James L. • Hubert , NC • January 11, 2015
I removed the bottom access plate to look at the drive mechanism and check the chain and gears. I confirmed the bigger drive gear was broken in three pieces. Once I replaced the gear and adjusted the distance between the two gears (which is really close to prevent the gears from losing contact and stripping them) it works great.
Read more
More
$55.95
- Compare At:
-
$66.58
- You Save:
-
$10.63
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.51
- Compare At:
-
$13.70
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130
The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.
Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.
Symptoms of a bad Front Leveling Foot include:
- The washing machine rocking or wobbling during operation
- Increased vibration and noise
- The washer being unlevel, affecting wash performance
- Difficulty in adjusting the foot
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle Carl W. • Glendale , AZ • June 27, 2015
REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS...
Read more
More
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 675382
Compactor won't turn on or stay running? This rotary switch kit controls power and operation. DIY-friendly repair in about 30 minutes with basic tools.
This part fixes the following symptoms
-
Won't start
-
Doesn't stop at end of compacting cycle
See more...
Do-It-Yourself Stories from Customers like You
Broken start switch on trash compactor John Z. • Charleston , WV • November 21, 2015
Original part was not available. Did some cross referencing and found s similar part
Read more
More
$95.32
- Compare At:
-
$112.48
- You Save:
-
$17.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90296
The Push Clip is an OEM replacement part for Whirlpool dryers. Situated internally near the rear cylinder wall, it firmly secures the drum support roller assembly.
Causes of failure relate to fatigue from years of absorbing drum impacts and associated mechanical stresses. Corrosion penetration if moisture enters the clip mounting area increases operational resistance over time as well.
Symptoms consist of:
- Uneven drying and weakened tumbling action inside the cylinder
- Vibration or noise emerging from the rear roller area
- Premature wear signals stemming from dislocated roller assembly
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Screaching noise Linda Z. • Kailua Kona , HI • February 06, 2015
Followed the video- opened the front of the dryer and removed the drum. It was evident that one of the wheels had worn and wasn't turning freely like the other one. The video showed how to remove the roller. Very simple process and now the dryer works just fine.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9870163
If your trash compactor won't compact or the ram is stuck, worn power nuts are likely the cause. This kit threads onto the power screw. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
My trash compactor's power nts stripped out and would no longer compact Rickey A. • Grass Valley , CA • May 01, 2016
I removed the appliance to my work shop and tore it down to trouble shoot I decided at that point to replace every wear part I could so I replaced the drive gear assembly also.
Read more
More
$51.46
- Compare At:
-
$61.24
- You Save:
-
$9.78
Genuine Whirlpool part
By: Whirlpool
Part Number: 882657
Replacement foot pedal for trash compactors. Installs at the base to operate the door release mechanism. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Daughter broke the foot lever off our whirlpool trash compactor Mike T. • Little Rock , AR • May 09, 2016
I ordered the part from Appliance Pros, and it arrived a few days later. We were headed out for the weekend but I grabbed a Phillips screwdriver and installed the screws real quick before we left. when we got back on Sunday, my wife asked who fixed the trash compactor. It went so fast, they never even saw me working on it!! It was an exact match and even included new screws. Thanks,
Mike
Read more
More
$68.95
- Compare At:
-
$82.74
- You Save:
-
$13.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 882688
Dual roller assembly for trash compactor drawer glide system. Replace when rollers are worn, cracked, or drawer slides hard. Installs on compactor base.
Do-It-Yourself Stories from Customers like You
My 30 year old whirlpool trash compactor roller bearings are "worn out"! L H. • Villa Grande , CA • January 17, 2015
Bot both sets of roller bearings, lower ones on the appliance and the set on the trash can that rolls out. I just followed the instructions that were in the roller bearing package and only needed the tools that are recommended. Was a little tricky with the nuts, really need a person with "small" fingers to reassemble the nuts back on the lower set of bearing that are on the appliance. All in All, went well and works. Found that the new bearings are v. tight on the machine, being new, so, use...
Read more
More
$22.41
- Compare At:
-
$26.89
- You Save:
-
$4.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP279368
The Adhesive is an OEM part for Whirlpool appliances, designed for securing and sealing various components within the appliances. This adhesive is ideal for use in situations where a durable and heat-resistant bond is necessary.Size: 2 oz. tube. This silicone rubber adhesive can be used on door gaskets, felt seals, and much more.
Over time, seals and insulation can become loose or detached due to wear, heat, or mechanical action, potentially compromising the appliance's functionality, efficiency, or safety.
The need for this adhesive may become apparent through symptoms such as:
- Loose seals or gaskets that result in heat loss, inefficiency, or the escape of moisture.
- Detached insulation leading to increased noise, heat transfer, or loss of energy efficiency.
- Components that have become unattached, affecting the appliance's performance or structural integrity.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Seal on dryer worn Randolph H. • Selfridge , ND • February 10, 2020
Seal and adhesive.
Read more
More
$50.43
- Compare At:
-
$60.01
- You Save:
-
$9.58
Genuine Whirlpool part
By: Whirlpool
Part Number: W10439651
The Drive Motor is an OEM part for Whirlpool washing machines. This part powers the agitator and spinning the drum, facilitating the various cycles of the washing machine to ensure clothes are thoroughly cleaned.
Causes of a bad drive motor can include general wear and tear over time, overheating, electrical issues, or mechanical failures within the motor components.
Symptoms of a bad Drive Motor include:
- Washing machine not agitating or spinning
- Loud or unusual noises during operation
- Burning smell coming from the motor
- Washer stopping mid-cycle or not starting at all
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
25 year old trash compactor motor quit working Robert O. • Pace , FL • May 18, 2014
Replaced the motor with a direct replacement part. The wiring was not the same because the switch on the motor was different. The instructions that came with the motor were enough for me to figure out what to do.
Read more
More
$196.95
- Compare At:
-
$234.37
- You Save:
-
$37.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9871602
Replacement roller bearing for trash compactor drawers. Installs on tracks to support smooth gliding. Replace worn or damaged bearings for easier operation.
Do-It-Yourself Stories from Customers like You
My 30 year old whirlpool trash compactor roller bearings are "worn out"! L H. • Villa Grande , CA • January 17, 2015
Bot both sets of roller bearings, lower ones on the appliance and the set on the trash can that rolls out. I just followed the instructions that were in the roller bearing package and only needed the tools that are recommended. Was a little tricky with the nuts, really need a person with "small" fingers to reassemble the nuts back on the lower set of bearing that are on the appliance. All in All, went well and works. Found that the new bearings are v. tight on the machine, being new, so, use...
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Whirlpool part
By: Whirlpool
Part Number: 13030RP
Holds compactor bags securely during operation. Replace if cracked, broken, or handles are damaged. Installs inside compactor drum for easy bag removal.
Do-It-Yourself Stories from Customers like You
Broken handle on trash compactor Lydia R. • Modesto , CA • February 07, 2015
Ordered the part, which arrived incredibly fast and switched out old one for the new.
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Whirlpool part
By: Whirlpool
Part Number: 675351
For use on power screw and ram pressure pads. Size: 4 oz. can.
Do-It-Yourself Stories from Customers like You
Element burnt out Sonya B. • Cheney , WA • December 11, 2016
Replace element
Read more
More
$49.40
- Compare At:
-
$58.29
- You Save:
-
$8.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911
Fix a refrigerator light that won't turn on or off when you open the door. This push-button switch senses door position. DIY repair in 30 minutes.
Do-It-Yourself Stories from Customers like You
A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random Kara H. • Charleston , SC • March 08, 2016
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND...
Read more
More
$26.74
- Compare At:
-
$31.82
- You Save:
-
$5.08