Lhw0050pq Parts

As a Mechanic, I did the common sense approach: INITIAL OBSERVATIONS & CHECKS: - Unplug Machine & check inlet water hose connections for leaks and signs of hose failure; - Remove back panel & inspect for water presence at all hose connections, pump, bottom of basket (bottom center of basket where the main motor, shaft bearing, and tub seal is located), dispensers, bottom of wash basket, water injector area, look everywhere where there is a hose connection and where water flows... - Inspect... Read more

Touch up paint Read more

Replaced It With New One Read more

• Leaking

We ordered parts from appliance parts pros and I fixed it. Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

• Noisy
• Will not drain

Very simple repair really. Unplugged the washer, moved the washer in order to have access to the back panel. Remove 13 #20 torx screws holding the back panel on ; then removed back panel. Open the filter access on the front bottom of the washer to drain any remaining water, be sure to have a towel ready, as if the pump is bad, there's bound to be quite a bit. Looking at the washer from the back, the bottom left contained the pump. Remkve the two electric connectors and move out of the way.... Read more

• Won't start

The power button would push in, but nothing happened. Unplugged the unit from the wall. To access the power switch from the inside, I took the top two screws off the back panel. (Star screws) The top panel then comes off- with a little lift forward from the back. I had to take off the top two switches to get to this third one, below. They just pulled out- I used a pair of locking pliers, b/c it was hard to get a grip on it. Then swapped the slip-on wire connectors to the new switch.... Read more

Yes Read more

I watched a 3 minute video on You Tube on how to replace a refrigerator door handle and it took me 3 minutes to replace mine. Super easy! Read more

The door hinges on my Maytag Neptune stacked washer/dryer where corroded badly. Took the time to replace the two hinges and repairing the epoxy coating on the front panel of the machine. Unit looks like new. Read more

Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more

I found it confusing on the website, but when I got it the installation was simple and it does what it is supposed to, Read more