Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the door opening on front-load washers to prevent leaks during cycles. Replace if torn, cracked, or leaking. Confirm fit with your model number.
Ordered the part from the Parts Pro and was happy to see the price was 30% below all other dealers I called. The delivery was a few days behind schedule but it was worth the wait for the savings. Read more
Fix a washer that won't drain or leaves clothes soaking wet. This drain pump removes water during the drain cycle. DIY-friendly, about 1 hour to install.
I drained the pump and removed coins etc from pump drain screen. This did not solve the problem, so I called Slagers, our local appliance store in Iowa City. The repair man came out two days later in the AM. He drained the pump again and checked the codes--he had to use our wireless internet because Sprint would not work from our house to determine the error code problem. He said it was the pump. I assumed he would call his Parts Dept for price and availability. Wrong assumption! He... Read more
Secures the door boot seal to prevent water leaks in front-load washers. Replace if rusted, broken, or boot becomes loose. Verify fit with your model.
I replaced the following parts in the GE WASHER that I have owned for approximately 14 years: Part no.: WH08X10038 - rubber gasket Part no.: WH01X10277 - inside gasket clamp Part no.: WH01x10279 - outside gasket clamp The two gasket clamps were ordered on 1/18/24 and delivered the next afternoon to my front door. I already had the replacement rubber gasket from a long time ago. I will mention that I have NEVER tried replacing a part on a major appliance. Since the washer machine is 14 years... Read more
The 2 In 3 Out Water Valve is an OEM replacement part for GE washing machines. It is located within the water supply system to help regulate water flow into the washer tub.
Causes of failure can include obstruction or clogging from mineral deposits over time. Valve components may also wear out with extended usage.
Symptoms of a faulty water valve include:
Compatible models include GE, Hotpoint, RCA, and select Kenmore models.
The GE front loading HE washer wound paused at the rinse fill point and need manual selection of drain & spin to finish the load. Online searches told me how to get the error code. Once E22 was found online searching told me it was a water flow problem- slow fill. I removed the hoses at the washer and inspected for clogs - nothing was found. I then put the ends of the hoses in a bucket and turned on the water- strong flow. Interesting is some debris/solids came out. I’m betting over time solids... Read more
GE Front load washer drum belt. Size: 48.4 inches at rest postion and 51.2 inches when working.
I replaced the broken drive belt first and noticed the drive pulley loose. The nut that had held it in place had backed off. This resulted in significant wear on the pulley hub. I just tightened it up and installed the belt. I noticed the belt had a tendency to change its position on the pulley depending on the direction of rotation. I was a bit concerned but decided to see what would happen. This fix lasted for about a week. The belt came off the pulley and broken again. I called a... Read more
Secures the door boot seal to create a watertight barrier in front-load washers. Replace if loose, corroded, or causing leaks. Confirm fit with your model.
Replaces a broken, damaged, or corroded suspension spring in your washing machine. Supports the tub and absorbs vibrations during wash cycles.
I literally could have done this job with a blindfold on! No kidding. Come on people! My grandmother could have done this one! Since the rubber gasket/skirt in the front of the washer (seals the door) was twisted when the spring failed and the drum failed, I had to remove the wire hoop and spring that held it in place and readjust the skirt. Easy. Them I removed the top of the washer (6 screws). Easy. Immediately you could see the failed spring. I ordered 2 springs so I could replace both... Read more
Fix slow draining or leaks at the filter access. This washer drain pump filter traps lint and debris before they reach the pump. Easy DIY replacement.
Order it and installed. Read more
Suspension damper shock absorber for front-load washers. Replaces cracked, weak, or broken shocks causing excessive vibration and off-balance loads.
I researched the problem and found that normal wear and tear will cause the Damper shocks and the Suspension spring to fail. I decided to replace all Damper Shocks and the suspension Springs since I had the washer apart already. The Suspension Spring requires a lot of pull to get it in place correctly. I made a hook tool (from political yard sign frame) to hook the old spring to remove and pull the new spring up. It helps to have a second person use leverage (use a short 2x2 board) under the... Read more
EMI filter installs where power cord enters washer to reduce electrical noise on incoming power line. Replace if cracked, damaged, or causing interference.
Stacking kit mounts your dryer securely on top of your washer to save floor space. Includes brackets and hardware. Replace if missing or damaged.
Ordered genuine parts from you! Read more
Fix a washer that won't spin or agitate. This motor assembly restores drum rotation and drive function. Typical DIY repair in 1-2 hours with basic tools.
After test that showed the tachometer signal was not there I replaced the motor.I paid for 2 day shipping and two days later I was putting the new motor in.I have to thank Appliance parts pro for the video,I had no idea how to replace this and the reason I always buy appliance parts from this Company Read more
Siphon pipe for washer drain air-break assembly. Prevents backflow and unintended siphoning. Replace if cracked, broken, or missing from detergent dispenser.
Ordered what I needed and installed them Read more
U-shaped drain hose for washers. Connects the washer drum to the drain pump. Replace if cracked, split, leaking, or has worn connections.
The impeller shaft on the drain pump snapped in half. I ordered a new drain pump and replaced it in about 20 minutes. Shipping was quick and moderately priced. Read more
Spring-style clamp secures drain hose to pump or fittings, preventing leaks and separation. Replace if loose, corroded, or causing water leaks. Verify fit with your washer model number.
We had the original drain hose but we needed the extension hose. I had watched several videos on appliancepartpros.com which were extremely helpful. My husband and I had it fixed in about 30 minutes. Read more