Parts for Whirlpool WRF989SDAM00: 06 - Shelf Parts

Replacement drum support roller that helps the dryer drum rotate smoothly and quietly. Installs where the drum rests to reduce noise and uneven rotation caused by worn or damaged rollers. What it does:

• Supports and guides the tumble/drum as it spins to maintain proper alignment.
• Reduces squeaks, rumbling, and scraping noises from worn or seized rollers.
• Prevents excessive belt wear and uneven drum movement that can lead to vibration.
• Restores smoother rotation when original rollers are cracked, worn, or binding.

• Disconnect power (and gas, if applicable) before beginning any repair.
• Access the roller by removing the dryer access panel or drum per your model's service instructions; support the drum to prevent it from falling.
• Inspect adjacent parts (idler, rollers, shaft, and belt) and replace if worn to avoid repeated failures.

Replace a cracked or broken refrigerator support bracket. This structural component mounts inside your fridge to secure shelves or components.

Plastic ladder support that holds door shelves in place on your refrigerator. Replace if cracked, broken, or missing to restore proper shelf mounting.

Replace your refrigerator's cracked, broken, or worn glass shelf. This clear storage shelf installs inside the fresh food compartment to organize food.

Fix frost buildup and temperature issues with this refrigerator defrost heater. Heats evaporator coils to prevent ice accumulation and maintain cooling.

Replace your broken or cracked refrigerator crisper pan. This drawer pan stores fresh produce in the lower compartment. Sold without axle and rollers.

Replacement glass shelf for your refrigerator interior. Installs on shelf supports to hold food and beverages. Order if your shelf is cracked or broken.

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement glass shelf for your refrigerator interior. Installs on shelf supports to organize food. Order when original is cracked, broken, or missing.

Tempered glass shelf for refrigerator crisper drawer compartment. Replaces cracked, chipped, or missing original shelf. Provides stable storage surface.

Glass shelf that sits above refrigerator crisper drawers. Replace this cover if cracked, chipped, or broken to restore proper shelf function.

Secures and aligns the rear of your refrigerator crisper drawer for stable, smooth sliding. Replace if broken, cracked, or worn to restore proper fit.

Replace your broken or cracked refrigerator crisper pan. This drawer pan stores fresh produce in the lower compartment. Sold without axle and rollers.

Replace your refrigerator's right pantry side plate if cracked, warped, or broken. Restores drawer seal and interior finish. Confirm fit with model number.

This replacement plate restores the original mounting/cover surface to help keep related components aligned and protected. It's a basic service part that replaces a worn, bent, or damaged plate to reduce fit and alignment problems. What it does:

• Provides the proper mounting or cover surface for the associated assembly
• Restores correct fit and alignment to reduce rattling, binding, or clearance issues
• Protects underlying components from direct contact or abrasion
• Helps maintain safe, stable operation when the original plate is damaged

• One replacement plate

• Disconnect power to the appliance before attempting any repair
• Use basic hand tools; support nearby parts to avoid damage during removal
• Handle carefully—edges may be sharp on metal plates

Right hand plate for bottom-mount refrigerators. Replace this structural component if your original plate is cracked, broken, or missing.

Track guide that mounts to the refrigerator shelf frame for the crisper drawer roller. Replace if cracked, broken, or worn to restore smooth drawer glide.

Decorative trim piece that restores the finished look of your refrigerator where trim has become cracked, chipped, or missing. Covers exposed edges or seams.

Replacement housing assembly for refrigerators. Secures internal components and restores structural support. Replaces cracked, broken, or missing housings.

Replacement internal support bracket for refrigerators. Secures and stabilizes components for proper alignment. Replaces worn, broken, or missing supports.

Replacement 8-18 threaded screw for refrigerators and washers. Secures panels, brackets, and internal components. Needed when original is lost or damaged.

Front support bracket that secures your refrigerator's crisper drawer for smooth sliding and proper alignment. Replace if cracked, broken, or missing.

Mounting screw secures panels, trim, and internal components to your refrigerator frame. Replace when original is missing, stripped, or damaged.

This sachet holder housing assembly secures single-use detergent or cleaning sachets inside the dispenser so they stay in place and release correctly during cycles. Replacing a cracked or broken holder restores reliable sachet positioning and dispensing. What it does:

• Holds detergent/cleaning sachets in the dispenser so they don't shift or drop into the tub.
• Ensures sachets stay aligned for proper release during the wash or cleaning cycle.
• Helps prevent sachets from rupturing or blocking the dispenser area.
• Common symptoms of a bad holder: sachets falling out, sachets not dispensing properly, or poor wash/cleaning results.

• Disconnect power (and water, if required) before servicing the dispenser area.
• Access the dispenser per the owner's manual; the holder typically snaps into place or secures with a small fastener.
• Handle plastic clips and tabs gently to avoid breakage; use a non-marring pry tool if needed.

Replacement cover panel for your refrigerator. Installs to conceal internal components or protect exterior surfaces. Order a new one if original is cracked, broken, or missing.

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

Replaces a cracked, broken, or missing access panel cover on your refrigerator. Restores exterior appearance and protects internal components.

Decorative trim piece that covers and finishes the edge around your refrigerator's control area. Replace if cracked, broken, or missing to restore appearance.

Secures the roller to your refrigerator drawer so crisper and pantry pans glide smoothly. Replace when drawers stick or wobble. Confirm fit by model number.

Replacement plastic crisper pan that sits under the drawer to support produce and catch spills. Replace if cracked, broken, or missing to keep interior clean.

Replacement pan handle for your refrigerator drawer. Installs on crisper or deli pans. Order a new handle if yours is cracked, broken, or missing.