Parts for Kenmore 253.7034241C (2537034241C, 253 7034241C): Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Adjustable flip-up shelf for refrigerator interior. Flips up to accommodate tall bottles and containers. Replace cracked, broken, or missing shelves.

Clear produce drawer for Frigidaire refrigerators with white front panel. Replace your cracked, broken, or missing crisper bin to restore proper storage.

Replacement shelf support for refrigerators. Secures and stabilizes shelves to hold stored items. Replace if cracked, broken, or worn from impacts or overloading.

The Shelf Support is an OEM part for Frigidaire refrigerators. Installed at set positions along the side walls, shelf supports provide sturdy surfaces on which to rest adjustable shelves or glass shelves. 

Causes of bad shelf supports can include general wear from repeated loading and unloading of shelves over time, as well as damage from accidental impacts.

Symptoms of bad shelf supports include:

• Shelves that wobble or sag in positions
• Difficulty inserting or removing shelves
• Small dents or breaks in the support surfaces
• Supports that are loosened from wall positions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This inner oven door glass replaces a cracked or cloudy panel and restores a clear view into the oven while helping maintain heat inside the cavity. Fits models that use the original OEM inner door glass panel. What it does

• Replaces damaged or broken inner oven door glass to restore visibility and containment
• Reduces heat loss by restoring the proper door seal and insulation area
• Helps prevent contact with hot oven components when installed correctly
• Useful when glass is cracked, chipped, or severely scratched and affecting appearance or function

• Requires removal of the oven door; for safe disassembly steps
• Handle with care—wear gloves and eye protection to avoid cuts from broken glass
• Inspect door clips, seals, and screws and replace any damaged hardware before reassembly

Metal or plastic channel that mounts and aligns refrigerator shelves or door bins. Replace if cracked, broken, or no longer securing shelves properly.

Replacement mounting rail that supports and secures refrigerator shelves. Install when your shelf channel is cracked, bent, or allows shelves to slide out.

Secures the shelf channel to the refrigerator cabinet to keep shelves level and stable. Replaces broken or worn mounting brackets for proper alignment.

Drawer slide rail for bottom-mount refrigerators. Mounts inside the refrigerator cabinet to support and guide drawers. Replace if cracked or broken.

Routes water from the valve to the dispenser and ice maker. Replace if cracked, kinked, or leaking to restore proper flow and prevent water damage.

The Water Filter is an OEM component specifically designed for Frigidaire refrigerators with built-in filtration systems. This filter removes contaminants and improves the taste of water distributed through the unit.  

Causes of a bad water filter include scale buildup over time reduced capacity, dried-out media failing to adsorb impurities, or torn casings leaking untreated water.

Symptoms of a bad water filter include:

• Diminished filter life unable to meet Gallon ratings  
• Tests indicating low flow or untreated bacteria/lead  
• Change filter reminders triggering prematurely
• Contaminants detected in ice or dispenser water

Replace yours today with this genuine OEM Frigidaire filter to restore freshness. Compatible with Gibson, Kenmore, and Electrolux models as well, proper filtration sustains appliance performance while satisfying health standards.

Bypass cap allows your refrigerator to operate without a water filter. Install when using external filtration or to restore water flow. Verify fit.

Secures the water filter cartridge and directs filtered water to dispenser and icemaker. Replace if the filter won't lock in place or leaks occur. Verify fit.

The refrigerator drawer slide rail support helps drawers and shelves move smoothly in and out of the refrigerator compartments. Replace when drawers stick, don't slide properly, or you hear grinding noises when opening drawers.

Replacement mounting bracket that secures internal refrigerator components. Restores proper alignment and stability when original is cracked or broken.

Encloses the water filter housing in your refrigerator's fresh food compartment. Replace this cover if cracked, loose, or missing to restore a secure fit.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

• One crisper cover (beam-style) as shown

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

Holds and seals the water filter cartridge in your refrigerator. Replace if the filter won't stay seated or if damaged. Confirm fit with your model number.

Secures the water filter housing to your refrigerator liner for proper alignment and sealing. Replace if cracked, loose, or causing leaks. Verify fit.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Replace worn or cracked refrigerator drawer rollers to restore smooth sliding and eliminate sticking or noise. Confirm fit with your model number.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.

Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head