Parts for Kitchenaid KDTM405PPS0: Third Level Rack And Track Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

This is the front retaining rail for the 2nd and 3rd level door bins on select refrigerators. It restores a secure barrier so items stay put and refreshes the clean, finished look of your door storage. What it does:

• Secures items on the 2nd and 3rd level door bins to help prevent tipping or spills
• Replaces a cracked, warped, discolored, or missing rail
• Helps the bin seat properly on the door when the original rail is damaged
• Typical symptoms include broken front trim, items falling from the bin, or difficulty reinstalling the bin

• One door bin rail

• Disconnect power before servicing for safety
• Remove the bin from the door and release the old rail from its locking tabs
• Align the new rail and snap it onto the bin; verify correct orientation for the 2nd/3rd level bin
• Reinstall the bin, ensuring it is fully seated in the door supports

Plastic tube hanger that holds the upper dishrack in place inside your dishwasher tub. Replace if broken, cracked, or missing to restore proper rack support.

Right side support for dishwasher third level rack. Provides secure placement and stability for the upper rack. Replace when cracked, bent, or broken.

Mounting clip that securely attaches your dishwasher under the kitchen counter. Replace if the original clip is broken, cracked, or missing.

Replacement door handle for your dishwasher. Installs on the front panel to open and close the door. Order if your handle is cracked, broken, or missing.

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Replacement silverware basket for your dishwasher. Holds utensils securely during wash cycles. Install if your original basket is cracked, broken, or missing.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

The Manifold is an OEM part for Whirlpool dishwashers. Located in the dishwasher base, it directs water flow to the primary wash and rinse arms during cycles. 

Causes of a bad manifold include mineral deposits clogging internal valves over time, worn seals no longer containing water as intended during rinse and wash, or broken diverter components.

Symptoms of a failed manifold are:

• Inadequate spraying from wash and rinse arms during cycles
• Water leaks developing inside the dishwasher cabinet  
• Improper dispensing of rinse aid or uneven drying results

It is also compatible with KitchenAid, Jenn-Air, and some Maytag dishwashers.

This manifold directs gas from the valve assembly to the range's burners so they ignite reliably. It replaces a damaged or leaking manifold to restore proper gas flow and even burner operation. What it does

• Channels gas from the control valve to individual burners for ignition.
• Helps maintain steady burner flames and consistent cooking heat.
• Can prevent gas leaks caused by cracked or corroded manifold passages.
• Addresses symptoms like uneven flames, burners that won't light, or visible manifold damage.

• One replacement manifold as shown.

• Turn off gas supply and electricity to the appliance before starting any work.
• Inspect associated gaskets, fittings and valves for wear; replace any damaged components.
• Use proper tools and follow manufacturer torque and sealing recommendations.

Replacement cover for your dishwasher. Installs to protect internal components or conceal openings. Order if your original is cracked, broken, or missing.

Replaces a damaged, cracked, or missing plastic cap on your dishwasher rack tube. Restores secure rack support, smooth sliding, and prevents rattling.

This factory hardware nut secures threaded components inside your appliance, keeping parts tight and properly aligned during operation. Replace a stripped, corroded, or missing nut to restore a solid connection and prevent looseness or noise.

• Threads onto a matching bolt or stud to clamp parts together securely
• Helps maintain clamping force under vibration when properly tightened
• Replace if threads are worn, rounded, cracked, or rusted
• Symptoms can include loose or rattling parts, misalignment, or a fastener that won't tighten; in sealed water-path locations, leaks may occur

• Disconnect power; shut off water and/or gas before service
• Hand-start the nut to avoid cross-threading; finish tightening with the proper tool
• Do not overtighten; follow model-specific torque guidance if available
• Inspect the mating bolt/stud and any seals or washers during reassembly; replace if damaged

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This clip functions to hold the upper dish rack in place during washing cycles.

Symptoms of a bad dishrack stop clip can include:

• Movement or vibration of the upper dish rack during washing
• Visible damage, bending or broken tabs on the mounting clip itself  
• Inability to smoothly slide or remove the upper dish rack

Causes of a bad dishrack stop clip usually stem from normal wear and tear over extended use. Overtight loading of dishes could also put excessive stress on the clip.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Secures the sliding dishwasher rack at the rear of the tub. Replace if your clip is cracked, broken, or missing to keep the rack properly positioned.

Replace cracked or worn dishwasher dishrack wheels that guide the upper rack in and out smoothly. Single wheel for convenient loading and unloading.

Replacement mounting screw for dishwasher panels, brackets, and trim assemblies. Secures loose or missing fasteners on internal and external components.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.