Parts for Whirlpool WTW6800WE1: Top And Cabinet Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This panel covers the top portion of your washing machine and provides access to internal components. It houses controls and protects the machine's internal mechanisms. Replace it if the panel is cracked, won't stay closed, or has damaged hinges that prevent proper access for maintenance.

This washer sound absorber reduces vibration and noise from the cabinet during operation. It dampens mechanical sounds and prevents them from transferring to surrounding areas. Replace this sound absorber if your washer has become noticeably louder, vibrates excessively, or if you can see that the existing material is deteriorated.

Rear panel for your washer. Covers and protects the back of the machine. Replace if your original panel is cracked, dented, rusted, or missing.

Secures the washer drain hose to the cabinet frame to prevent movement during draining. Replace if cracked, broken, or missing to reduce vibration noise.

Sound absorber insulation pad mounts inside your laundry center cabinet to dampen vibration and reduce noise. Replace if pad is missing, worn, or damaged.

Suspension rod ball and bushing kit with 4 balls and 4 bushings. Replaces worn or broken suspension components that cause washer movement and noise.

Replacement suspension spring kit for washer tubs. Includes multiple springs that support and stabilize the drum. Needed when springs are broken, stretched, or worn.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

The Whirlpool screw is an OEM replacement part responsible for fastening and securing different components in the washer. This screw is used in various locations throughout the appliance, such as attaching panels, brackets, and other parts together. Its main function is to provide a tight and reliable connection, preventing any loose or unstable components that could disrupt the washer's operation.

This part fixes the following symptoms:

• Loose or unstable components in the washer
• Visible signs of wear, rust, or damage on the screw
• Unusual noises or rattling sounds during washer operation

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Replacement lid hinge for top-load washers. Installs on the washer top to support the lid opening and closing. Needed when hinge is cracked, rusted, or broken.

Connects washer lid to machine body for smooth opening and closing. Replace if hinge is rusted, corroded, cracked, or broken off the lid assembly.

Right-side hinge spring for washer lids. Restores proper tension and alignment for smooth opening and closing. Replace when worn, broken, or missing.

This top panel lock replaces a worn or broken front lock that secures the appliance's top panel. It restores a solid, secure top panel and helps prevent accidental opening during use. What it does:

• Acts as the front latch to hold the top panel closed
• Prevents the top from shifting, rattling, or coming loose during operation
• Helps stop access to internal components when the top is closed
• Commonly used when the top panel is loose, won't stay closed, or the latch is broken

• Disconnect power before beginning any repair to avoid shock or injury
• Basic hand tools (screwdriver) are typically needed
• Remove the top panel carefully to access the lock; note screw locations for reassembly
• Test the lock and panel alignment after reinstalling to ensure proper operation

Support cup that sits under washer leveling legs to distribute weight and protect flooring. Replace if cracked, broken, or missing to restore stability.

This adjustable leveling leg supports and stabilizes your washing machine on uneven floors. It screws into the washer's base and can be adjusted to eliminate rocking and vibration. Replace if your washer shakes excessively, makes loud noises during operation, or appears tilted.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Softener not dispensing or leaking before the wash? This dispenser restores proper rinse cycle release. Easy DIY fix with video guide included.

Fix washer leaks from the top or bleach not dispensing. This replacement bleach dispenser cup stops drips and restores proper bleaching. 10-min install.

Fix washer leaking or puddling on the floor with a new water nozzle assembly. Stops dripping, misdirected spray, and restores proper water flow.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Washer won't start or shows LD error code? This lid lock assembly fixes locking failures. DIY-friendly repair takes under an hour with video guide.

Color: White

This condenser tie is a small plastic wire tie used to secure the condenser assembly or related wiring and tubing in place. It helps prevent rubbing, vibration noise, and loose routing that can cause wear or interference. What it does:

• Secures condenser coils, wiring harnesses, or drain/tubing to the appliance frame
• Prevents rubbing and vibration that can cause noise or premature wear
• Keeps wiring and tubing routed away from moving parts and hot surfaces
• Helps maintain tidy component placement for reliable operation

• Disconnect power to the appliance before servicing.
• Use pliers or a tie tool to snug the tie; trim excess tail flush to avoid sharp edges.
• Single-use plastic ties may need replacement if cut for removal.
• Route tied components clear of fans, sharp edges, and heating elements.

Top spring hinge for washer lids. Provides tension and pivot support for smooth opening and alignment. Replace if cracked, broken, or causing lid sag.

Specs: 10-16 x 1/2 inch.

Replace your washer's cap cover if it's cracked, broken, or missing. This cover installs on the washer to protect internal components and maintain appearance.

This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.

Replacement 8-18 threaded screw for refrigerators and washers. Secures panels, brackets, and internal components. Needed when original is lost or damaged.

Plastic spacer that supports the lid hinge assembly on top-load washers. Replace if cracked, worn, or missing to restore proper lid operation.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

Used from harness to top.

This ground wire provides a safe chassis connection to restore proper grounding and reduce shock and electrical-fault risk. It replaces a frayed, corroded or missing ground lead to help keep the appliance electrically safe. What it does

• Connects the appliance chassis to the grounding system to prevent stray voltage on metal surfaces
• Restores a secure ground path if the original wire is broken, loose, or corroded
• Helps stop intermittent power faults or nuisance tripping caused by a compromised ground
• Addresses symptoms like visible wire damage, loose ground connection points, or grounding-related electrical issues

• One ground wire

• Always disconnect power (unplug or shut off the circuit breaker) before starting work
• Attach the ring/terminal ends to the designated chassis ground screw and the equipment ground point
• Route the wire away from moving parts, heating elements, and sharp edges; secure with existing clips or fasteners
• If terminal hardware is missing or damaged, replace with equivalent OEM-style fasteners and torque to specification

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

• Loose or detached rear bulkhead allowing side-to-side play
• Excessive noise and shaking felt through the surrounding walls   
• Development of micro-cracks around screw holes over time
• Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Flat washer used in various washer assemblies. Replace if the original washer is lost, damaged, or worn to ensure proper fit and secure fastening.

Suspension rod ball and bushing kit with 4 balls and 4 bushings. Replaces worn or broken suspension components that cause washer movement and noise.

Replace this washer door seal gasket to prevent leaks and maintain proper moisture control. Essential when you notice water escaping or seal damage.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.