Parts for Roper RTG5243BL0: 10 - Tub And Basket Parts

The Agitator Cap is an OEM part for Whirlpool washing machines. It fits on top of the agitator and helps secure the agitator components, ensuring proper functioning during the wash cycle. This cap is essential for maintaining the agitator's efficiency and preventing water from entering the agitator assembly.

Causes of a bad agitator cap can include wear and tear from regular use, cracking or damage from impacts, or degradation due to exposure to detergents and water over time.

Symptoms of a bad agitator cap include:

• The cap being loose or not fitting properly
• Water leaking into the agitator assembly
• Excessive noise during the wash cycle
• Reduced agitation performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This agitator Bolt is an OEM replacement part for Whirlpool washing machines. It is a crucial component for maintaining the performance of various washing machines and washer-dryer combos. This agitator bolt secures the agitator, ensuring smooth and efficient operation. The kit includes one 7/16" screw head bolt with a rubber gasket and threaded sealant.

Causes of a faulty bolt can be damage from mineral deposits accumulation preventing smooth tightening, or wear over time compromising the threading. 

Symptoms of a bad agitator bolt include:  

• Loose or wobbly agitator unable to spin freely
• Abnormal noises or vibrations during cycles  
• Insufficient cleaning from improper agitation
• Safety concerns if the agitator detaches entirely

This OEM replacement part is also compatible with  Inglis, Estate, Admiral, Crosley, Roper, Magic Chef, Amana, KitchenAid, Maytag, Whirlpool, and Kenmore brand models.

The Filter (Upper Agitator) is an OEM part for Whirlpool washing machines. It is designed to filter out lint and debris during the washing cycle, ensuring clean and efficient operation. Located in the upper agitator, this filter helps maintain the washing machine's performance by preventing clogs and buildup within the agitator and tub.

Over time, the filter can become clogged or damaged due to accumulated lint, debris, and regular wear and tear. This can lead to reduced filtering efficiency, affecting the overall performance of the washing machine. Physical damage to the filter or its components can also impair its function.

Symptoms of a bad filter include:

• Excessive lint on clothing after washing
• Decreased water flow during cycles
• Strange noises from the agitator area
• Poor cleaning results

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fix a washer agitator that won't turn or spins weakly with this lower agitator base. Restores proper wash action when worn, cracked, or stripped.

Washer tub ring that snaps onto the top of the outer tub. It acts as the tub cover and splash guard, guiding water back into the tub and supporting inlet or dispenser fittings to help keep the rim area contained.

• Attaches to the top of the outer tub as the upper splash guard/tub cover
• Directs water back into the tub; supports inlet/dispenser nozzles, if equipped
• Maintains proper clearance around the spin basket
• Common replacement signs: cracks, broken locking tabs, splashing from the rim, or rubbing at the top opening

What's included: 1 tub ring Install notes:

• Disconnect power and water supplies before servicing
• Lift or remove the top panel to access the tub rim
• Release locking tabs and detach any hoses/nozzles from the old ring; transfer fittings if needed
• Seat the new ring evenly; ensure all tabs fully engage. Reassemble and run a test cycle to check for leaks/splashing

Noisy spin cycle or loose tub? This spanner nut secures the washer tub to the drive shaft. Requires spanner wrench for installation. DIY-friendly.

Seals between inner and outer washer tubs to prevent leaks and moisture buildup. Replace if you notice water pooling or dampness. Verify fit with your model.

The Washer Drive Block is an OEM part for Whirlpool washing machines. This component is situated between the washer's transmission and the inner tub, playing a key role in transferring the rotational motion from the motor to the tub. 

Causes for replacement often stem from normal wear and tear, which can lead to the drive block becoming worn or damaged. This wear can prevent the drive block from properly engaging with the tub, leading to inefficient cycles and potential damage to other parts of the washing machine.

Symptoms of a bad Washer Drive Block include:

• The washer tub has difficulty agitating or spinning.
• A loud noise during the spin cycle, indicating that the tub is not engaging correctly with the transmission.
• The machine vibrates excessively or seems off-balance, even with a balanced load.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replaces cracked, worn, or leaking hoses in laundry center units. Ensures proper water flow between internal components. Order now for your repair.

Fix water leaks from loose hose connections with this spring hose clamp. Secures washer hoses to fittings and restores tight seals. Quick DIY repair.

Flexible water hose that transports water between laundry center components. Replace when original hose is cracked, split, leaking, or worn out.

Sound dampening pad for washers. Reduces vibration and noise during operation. Replace if worn, cracked, or missing to restore quiet performance.

Directs water from your washer to the drain outlet. Replace this tube if cracked, clogged, or leaking to prevent water pooling and potential damage.

Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.

Seals the center post/agitator shaft to prevent water leaks during wash cycles. Replace if you notice pooling water under your washer. Confirm fit with your model.