Parts for Ge ZET2FL1SS: Upper Oven Parts

Seals oven door to prevent heat loss and ensure even cooking. Replace if you notice excessive heat escaping, uneven baking, or visible damage. Confirm fit by model number.

Fixes oven not heating after self-clean cycle. This thermal safety switch cuts power when temperatures get too high. Simple diagnosis with continuity test.

Air divider panel for double wall ovens. Separates oven cavities and directs airflow. Replace if cracked, warped, or missing to restore proper oven operation.

Replace a worn or broken right-side oven rack guide to restore smooth rack movement and stable support. Prevents binding and keeps racks aligned.

Left-side oven rack guide supports and aligns your oven rack for smooth sliding. Replace if cracked, broken, or worn to restore stable rack movement.

Flat rack for electric wall ovens. Provides a stable baking surface. Replace if yours is rusted, warped, damaged in moving, or worn from high-heat use.

Guides your oven rack for smooth sliding. Replace if racks sag, scrape, stick, or tilt when loaded. Confirm fit with your model number before ordering.

This replacement broiler pan assembly provides a durable surface for broiling and collects drippings to help reduce flare-ups and smoke. Designed to restore even browning and simplify cleanup in compatible ovens. What it does:

• Holds food during broiling and exposes it to direct heat for browning and searing
• Collects grease and drippings to help reduce smoke and flare-ups
• Elevates food on the grid for more even heat exposure and crisping
• Replaces warped, dented, or corroded broiler pans that no longer perform properly

• Allow the oven to fully cool and turn power off before handling the old pan
• Slide the pan and grid into the broiler compartment or designated oven rack position until seated
• Clean with warm, soapy water; avoid abrasive cleaners that may damage the finish
• Use oven mitts when removing after use and inspect regularly for warping or heavy corrosion

Broiler pan grid holds food above drip pan for even browning and proper fat drainage. Replace when warped or corroded. Confirm fit with your model.

Oven not heating or baking unevenly? This hidden bake element kit restores proper heating. Includes element, bracket, and wiring for complete repair.

Oven won't broil or brown food properly? This broil element delivers direct heat from the top for searing and browning. Moderate DIY install.

Fix F2 or F34 error codes and inaccurate oven temperatures with this temperature sensor assembly. Moderate DIY repair, 30-60 minutes install time.

Retainer bolt secures internal components and panels in your range or wall oven. Replace if bolt is stripped, missing, or causing loose assemblies.

Oven display dim or lights not working? This right-side LED board assembly restores proper illumination and control signaling in electric wall ovens.

LED light board assembly powers interior oven lighting. Replace when lights flicker, dim, or fail to illuminate. Verify compatibility with your model.

Fixes dim or shadowy oven lighting. This LED light lens protects the bulb and restores clear interior visibility. Replaces cracked or cloudy lenses.

Decorative trim piece for the lower edge of your wall oven where it meets cabinetry. Replace if cracked, damaged, or missing to cover gaps and restore a clean look.

This retainer bearing supports the dryer drum shaft and helps the drum turn smoothly, reducing shaft movement and wear. Replacing a worn retainer bearing can stop rubbing, grinding, or wobbling noises and improve drum alignment. What it does

• Holds and centers the drum shaft to prevent excessive axial movement
• Reduces metal-on-metal contact that can cause squealing or grinding
• Helps maintain smooth, consistent drum rotation and alignment
• Commonly replaced when you hear rubbing, scraping, or loud bearing noises

• One retainer bearing

• Disconnect power before servicing; for gas dryers also shut off gas supply
• Access requires removing panels or the cabinet to reach the drum shaft area
• Inspect adjoining parts (shaft, rollers, glides) and replace if worn to prevent repeat failure

The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking.

Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age.

Symptoms of an inadequate probe thermistor include:

• Inaccurate temperature readings and baking inconsistencies
• Oven temperature exceeding desired setting risking fire

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures and supports oven door pivot for proper alignment and smooth opening/closing. Replace if door sags, won't close flush, or hinge feels loose. Confirm fit with your model number.

Heat escaping around broil element? This pass-through gasket seals the opening where the element enters the oven liner, containing heat and steam. Quick DIY fix.

This bottom air duct cover directs cold-air flow inside the refrigerator to help maintain consistent temperatures and protect internal components. It replaces a cracked or missing duct cover to restore proper airflow routing. What it does

• Channels refrigerated air through the lower cabinet to support even cooling
• Protects evaporator/fan pathways from debris and accidental contact
• Helps reduce localized warm spots and uneven food cooling
• Prevents rattling or vibration caused by a damaged or loose duct cover

• One bottom air duct cover

• Disconnect power to the appliance before starting any repair
• Remove shelves, drawers and any trim blocking access to the duct area
• Handle plastic parts gently to avoid cracking; secure with original clips or screws

Shields your oven's hidden bake element from spills and debris. Directs heat for even cooking and reduces cleaning. Moderately easy DIY install.

Replacement inner top plate for wall oven ceiling. Restores interior surface, protects wiring and insulation from heat and drips. Needed when cracked or worn.

Oven not reading meat temperature accurately? This meat probe and harness assembly monitors internal food temperature during cooking cycles.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Replacement rack guide nut for wall ovens. Secures oven rack guides in place. Order a new nut if yours is stripped, broken, or missing from the cavity.

This replacement screw fastens panels, brackets, or trim inside your appliance. Swapping in a new screw restores a tight, secure fit and helps stop rattles, looseness, or misalignment caused by missing or damaged hardware.

• Secures panels, brackets, or trim to the appliance chassis
• Helps maintain proper alignment and spacing of components
• Replaces missing, rusted, or stripped hardware
• Helps resolve loose panels/handles, vibration, or rattling noises

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location; start threads by hand to avoid cross-threading
• Use the appropriate driver and tighten snugly without overtightening
• Inspect the mounting hole or clip for damage and address as needed before reassembly

Black. 8-18 AB HXW 3/8

Replacement washer for ranges and ovens. Used to secure components and provide even fastening. Replace if cracked, worn, or missing during repairs.