Parts for Kenmore 790.48452410 (79048452410, 790 48452410): Upper Oven Parts

Oven rack for electric and gas ranges. Replaces damaged, warped, or missing racks. Slides into side rails to support cookware during baking and roasting.

Broiler pan for electric and gas ranges. Installs in oven cavity for broiling. Replace if cracked, warped, rusted, or heavily stained beyond cleaning.

This broiler insert is the oven pan insert that sits under the broiler burner to catch drips and help direct heat for even browning. It restores a stable cooking surface and keeps the broiler area cleaner. What it does:

• Holds food and catches grease and drips during broiling to prevent mess and flare-ups
• Directs heat from the broiler for consistent browning and searing
• Replaces damaged, warped, or corroded inserts that cause uneven cooking
• Helps prevent food from falling into the burner area

• One broiler insert

• Disconnect power to the appliance and allow the oven to cool completely before servicing
• Remove oven racks and slide the old insert out; position the new insert so it seats securely in the broiler cavity
• Wear heat-resistant gloves when testing the broiler after installation and inspect for proper fit before use
• Do not modify the part; use only as designed for the oven broiler assembly

Seals your oven door to retain heat and improve efficiency. Replace if worn, cracked, or causing heat loss. Confirm fit with your model number.

Oven not responding to buttons or features won't activate? This control switch restores reliable operation by opening and closing electrical circuits.

The Range Lamp Assembly is an OEM part for Frigidaire stoves and ranges. It consists of the halogen light bulb, lens cover, and wiring harness necessary to illuminate the oven cavity. This lamp assembly provides light to the cooking and baking space, making it easier to view food and monitor cooking progress.  

Symptoms of a bad range lamp assembly include:

• The oven light not turning on at all  
• Dim, flickering, or intermittent light
• Burned out or blown light bulb
• Cracks or damage to the lens cover

Causes of failure can be a burned out light bulb, broken wiring, or damage from impact or heat over time. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

Oven displaying probe error or reading temperature when unplugged? This meat probe monitors internal food temperature. Easy DIY replacement part.

This cabinet insulation panel helps reduce heat transfer into the refrigerator cavity to improve cooling efficiency and reduce frost buildup. It fits behind the liner to help maintain consistent internal temperature. What it does

• Replaces worn or missing cabinet insulation that can allow warm air into the appliance
• Helps reduce frost buildup and overworking of the compressor when functioning properly
• Improves cooling efficiency and helps stabilize interior temperature
• Works as part of the refrigerator's thermal barrier around the compartment

• One cabinet insulation panel

• Disconnect power to the appliance before starting any repair
• Remove interior panels/preservations as needed to access the insulation per OEM instructions
• Handle the panel carefully to avoid tearing or compressing the insulation; re-seat evenly for best fit
• If adhesive or fasteners are used, replace with OEM-approved materials and follow manufacturer guidance

Vent box assembly for electric wall ovens. Installs at the top of the oven cavity to direct heat and steam. Replace if cracked, damaged, or missing.

Mounting bracket for wall ovens. Secures oven to cabinet or wall. Replace if bent, cracked, rusted, or missing to ensure proper installation.

If your oven won't heat or heats unevenly, this heating element restores proper temperature control. Straightforward DIY fix for most ranges.

Oven not heating or baking unevenly? This wall oven heating element restores proper temperature. Common DIY repair takes 30-45 minutes with basic tools.

Heat shield for ranges and wall ovens. Protects internal components from excessive heat. Replace if cracked, warped, or damaged to prevent overheating.

Receptacle block for electric ranges and wall ovens. Mounts in the rear panel to provide electrical connection. Replace if cracked, melted, or damaged.

The Fan Motor Assembly is an OEM part for Frigidaire wall ovens. This part powers the fan responsible for circulating air within the oven, ensuring even heat distribution for consistent cooking and baking results.

Causes of a bad fan motor assembly can include wear and tear over time, electrical issues such as short circuits or power surges, and physical damage from debris or impacts. 

Symptoms of a bad Fan Motor Assembly include:

• The oven not heating evenly or taking longer to reach the desired temperature
• Unusual noises coming from the oven during operation
• The fan not running or running intermittently
• Error codes related to the fan or airflow

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.

Convection fan motor that circulates hot air inside the oven cavity for even cooking temperatures. Replace if fan stops spinning or makes excessive noise during convection baking.

Secures internal panels or components to the range frame. Replace this mounting bracket if bent, broken, or missing to restore stable support and alignment.

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

Positions and supports range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure panels fit correctly.

This trim is the outer decorative trim piece that restores the finished look of your appliance door or opening. It replaces worn, cracked, or missing trim to improve appearance and help seal edges. What it does:

• Restores the appliance's exterior appearance by replacing damaged or missing trim
• Covers and protects edges where panels meet, preventing dirt buildup
• Helps align surrounding panels and can hide minor gaps along the door or opening
• Commonly used when trim is cracked, chipped, dented, or cosmetically worn

• One outer decorative trim piece

• Disconnect power (and water supply if applicable) before beginning any work
• Remove any access panels or fasteners to access trim mounting points; handle carefully to avoid scratching surrounding surfaces
• Trim typically secures with clips or screws—retain all hardware and follow manufacturer diagrams

Replacement water-line tube that routes water inside the refrigerator to the ice maker or dispenser, helping restore proper water flow and reduce leaks. Designed to match factory routing so the line fits and seals correctly at the connections. What it does:

• Carries water from the cabinet valve to the ice maker or dispenser.
• Restores normal dispenser flow and ice production when the tube is cracked, pinched, or clogged.
• Helps stop visible leaks or pooling caused by damaged or misrouted tubing.
• Matches factory bends for correct routing and clearance behind panels.

• Disconnect power and shut off the water supply before starting any work.
• Remove shelves or panels as needed for access; watch for sharp edges.
• Check and replace any worn clamps or fittings; tighten connections and test for leaks with water on before reassembling.

Replacement mounting screw for range power and control boards. Secures electrical board connections. Needed when original screw is missing or damaged.

Replace your oven's broken or missing rack spring. This small metal spring helps support and stabilize oven racks during sliding and positioning.

Mounting screw for electric and gas ranges. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.