Wall Oven Touch Pad

I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more

This repair doesn't require too much thinking, been a sticker you just have to take put the old one and stick the new one. Read more

Unplugged stove. Removed six 1/4 inch socket head screws from back panel. Removed back panel. Removed plug on the back of the OCB. Removed OCB. Used Philips screwdriver to remove four mounting screws (and cracked pieces of the mounting holes). If you can get to this point, installing the new OCB is pretty self explanatory. Read more

• Touchpad does not respond

Took off the the front panel. First removed the knobs, then the four screws above each knob stem. With oven door open removed four screws under the front door oven panel. Last removed the two side screws on the oven control. Keeping hold of the front unit. Then removed the pigtail attached to the panel and the ground screw. Now the unit is detached. Then removed control box with the two screws. This did two things. One easier access to the ribbon inserts for easier removal. Second since the... Read more

Ordered a Pcb board and membrane switch it fixed the problem Read more

Order the part from you all. Watched the video how to install, which was easy to understand. the part arrived A DAY EARLIER than we expected! How nice is that? and installed part, stove /oven works. everybody's happy. Read more

Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I... Read more

I ordered the three parts listed and now my oven is beautiful, functional and like new again. I first had to figure out that the original parts are no longer available and had to perform an oven upgrade. Obviously the original design was flawed and the new design works perfectly and looks great! The whole repair cost was about $328 with shipping included. The parts were here in just a few days, about 2 to 4 days (some in two days, one in 4 days). Much cheaper and easier than replacing the... Read more

Purchased a new over control board and overlay. Installed in five minutes, and everything works great now. Shipping was super fast, and was here within two days. Read more

The glue behind the keypad loosened and the keypad slowly began slipping down out of place over several months. Finally, because of the movement, it warped which resulted in one of the keys being stuck. That is what gave the F12 error code. The fix was easy. I removed the control panel and then peeled off the keypad. The keypad itself then has two layers (1), the flexible circuit panel, and (2) the outward facing display. I separated the display from the circuit panel and put the new one... Read more

After checking all connections to ensure power was getting to element. I ordered new control board and replaced it myself. Saved about $100.00 on a service call for someone to come out and replace it Read more

Replaced Oven control Board, I actually had a "professional" appliance repair man come to the house and tell me what was wrong with the oven. While he was standing in my kitchen, I noticed he pulled up the AppliancePartsPros.com website to quote me the pricing for the parts. I did not see it necessary to pay him the marked up price. He left the house without repairing the oven I proceeded to order the parts that same evening, replaced the bad parts the same day I received them. I noticed while... Read more

My wife put the faceplate on the oven control while I accessed the display by pulling the oven out, unplugged it, and removed the rear cover. Only three nut head screws held the upper back panel. 4 nut screws hold the display onto the oven, they were easily removed. My wife took a couple photos of the rear wiring to ensure we plugged the new oven control in properly (there are a fair number of wires but they are color coded in most cases). Turns out we didn't need the photo. As we pulled a... Read more

Well, after searching for a model number on the range, had to pull the existing module for the part number. Ordered and was shocked to see it arrive the very next day (no, didn't pay for next day). Went back together a lot quicker then me taking apart! Read more

I installed a new clock timer and overlay the job took only a few minutes and a very easy repair. Useful hint take a picture of your clock timer before you start to make sure all your wires are put back in the right order . Charles B Lafayette Tn Read more

I replaced the control board. Repair company wanted $395.00. I ordered the board for 140ish, 5 days later, 9 screws, 6 moduler plugs....working oven. The hardest part was pulling out the stove. Read more