Weedeater Chainsaw Parts

This genuine Husqvarna filter holder can be used as a replacement part for string trimmers. The function of a filter holder, otherwise known as an air box, is to take in external air flow and channel it through a network of valves into the cylinder of the engine, which is where the fuel combusts and ignites the spark plugs.A filter holder might have to be replaced if it shows symptoms of disrepair or malfunction that prevent it from transferring air flow into the cylinder. These symptoms of damage could include an engine that won't start or misfires frequently, reduced fuel economy, or block smoke pouring out of the exhaust. Though these symptoms are not necessarily directly attributable to the filter holder, if a visual inspection shows that a damaged filter holder is indeed responsible, it should be replaced immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This filter holder is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.

Catches debris entering your trimmer's engine for proper air/fuel mixture. Replace when dirty or clogged to fix poor performance, misfiring, or gas smell.

Fix a broken or missing pull start handle that prevents engine starting. This chainsaw starter handle works with the recoil assembly for reliable starts.

Replacement assist handle for line trimmers. Mounts to the shaft to provide steering control and grip during operation. Replace if cracked or broken.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

Left hand runner bracket for riding mower tractors. Secures internal components. Replace if cracked, bent, damaged, or missing for proper assembly.

This steering bushing is a genuine MTD part, sold individually. This steering bushing can be used as a replacement part in a lawn mower. The purpose of the steering bushing is to mitigate and prevent the excessive vibration and shocks that could result from the steering wheel during the operation of the lawn mower.The steering bushing in a lawn mower might have to be removed and replaced by this genuine OEM replacement part if it can no longer serve its function of minimizing vibration. It is a simple replacement process that will require only basic tools to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steering bushing is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, Ariens, and Dixon.

Spring clip retainer fastener for riding mower and tractor assemblies. Replace this clip if broken, missing, or no longer holding components securely.

If your riding mower won't start or turn off properly, this ignition switch kit provides all components needed to restore power control functionality.

Height adjuster spacer for lawn mowers and trimmers. Mounts to deck adjustment mechanism. Replace if cracked, worn, or missing to restore proper function.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

Replacement grip handle for riding mowers and lawn tractors. Provides secure grip while maneuvering. Order if your current handle is broken, cracked, or missing.

Replacement bump knob for line trimmers. Secures the spool on the trimmer head. Replace if cracked, broken, stuck, or seized. Easy installation component.

This baffle plate is a genuine Husqvarna part, sold individually. This baffle plate can be used as a replacement part in a string trimmer of a pole pruner. The purpose of the baffle plate in a string trimmer or a pole pruner is to control and regulate the amount of heat that is retained within the appliance.If the baffle plate shows signs of damage or reduced efficacy, the baffle plate should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance by its operator.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This baffle plate is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.

Note: This is ONE blade.