Joseph G Loveland , CO March 12, 2014 The old element had burned out like a 4th of July sparkler 1) ordered new boiler element after searching for oven/stove model # online 2) unplugged oven 3) removed 2 screws holding element in place 4) pulled out the element and a length of wires attached to the element (enough that the wires wouldn't pull back into the hole after detached) 5) used needle-nosed pliers to detach wire clamps, noting which wire attached to which side of the old element 6) removed old element and its pieces from the bottom of oven 7) attached wires to new element, connecting the correct wire with the correct element terminal 8) stuffed the wires back into the hole, making sure they went behind the fireproof wool 9) reattached the element bracket with the 2 screws 10) tested oven and it works fine Read More... 8 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
James S Sharon Hill , PA January 02, 2016 Appliance: Maytag Self Cleaning Free Standing Electric Range MER5552BAS The baking element broke I replaced it and it only took about 10 minutes Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Vincent C Pocono Lake , PA July 10, 2023 Element burnt out/ shorted and broken/ We replaced the bake element. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Jim T Groveton , NH February 21, 2016 Appliance: Maytag Self Cleaning Free Standing Electric Range MERS751BAW Element went on fire and parted Removed Old element after shutting electric braker off, ordered a new one and then connected the new one Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Jerry H Cincinnati , OH August 12, 2022 The bottom heating element (for baking) stopped working. Ordered new B-Element, installed, tested. Works correctly. Also, completely disassembled the oven door, cleaned all 3 levels of glass with ammonia, and a razor scraper on the innermost to remove the built-on splatter, reassembled. Now, my wonderful wife claims that the door glass has Never been this clean as we had purchased the Maytag glass top range used. I have purchased from AppliancePart Pros.com several time and the parts are always correct and the shipping was quick Thank you! Jerry H. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers