Amana Range Gas Conv Kit Parts

The LP Bake and Broil Kit is an OEM replacement part for Whirlpool ranges. It is a kit containing everything needed to convert the oven from Natural gas to LP.

Causes of a bad bake/broil system can include cracks, leaks, or corrosion in gas lines that produce unsafe flames over time. Pilot lights may fail to light consistently.

Symptoms of failures include:

• Inability to ignite bake/broil burners
• Erratic or intermittent baking temperatures
• Uneven cooking due to improper burner positioning
• Strong gas or chemical smells from the oven

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The LP Orifice Kit is an OEM part for Whirlpool gas ranges. It contains a set of five orifices designed specifically for use with liquid propane (LP) gas. Note: For the oven orifices, on some models they are adjustable and some they are not. Refer to parts list for your model when oven orifices are needed. LP orifice kit includes 5 orifices.

Causes of a bad LP Orifice Kit may stem from incorrect orifice size for the specific LP gas supply, wear or damage to the orifices over time, or improper installation.

Symptoms of needing to replace the LP Orifice Kit can include:

• Uneven heating or incomplete combustion of the burners
• Yellow or flickering flames instead of a steady blue flame
• Reduced cooking performance or inefficient heating

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Converts your gas range from natural gas to liquid propane (LP). Includes orifices needed for safe operation on propane fuel. Required when switching fuel types.

Gas orifice spud meters gas flow to your range burner, controlling flame size. Replace when damaged, incorrect, or converting between natural gas and propane.

LP conversion kit for gas ranges. Includes orifices and fittings needed to convert your range from natural gas to liquid propane fuel source.

LP gas conversion orifice kit for range top burners and oven. Includes orifices needed to convert from natural gas to propane. Essential hardware.

This orifice spud meters gas to the burner for a consistent, correctly sized flame. Replace a clogged or damaged spud to restore proper burner output and reliable ignition on your gas cooktop or range.

• Controls and meters gas flow through a calibrated opening to the burner
• Helps ensure proper flame size and color when matched to the correct burner and fuel type
• Common symptoms of a failing or clogged spud: weak or uneven flame, yellow tipping, or delayed ignition
• Damaged threads or a stripped orifice can prevent correct sealing and fuel delivery

• Shut off gas supply and disconnect power; allow the appliance to cool
• Access the orifice holder/manifold for the affected burner; remove the old spud with an appropriate orifice wrench or nut driver
• Start the new spud by hand to avoid cross-threading; tighten snugly—do not overtighten brass threads
• Restore gas and check for leaks with an approved leak-detection solution; verify flame quality and adjust per the service manual

Converts gas range burners from natural gas to liquid propane fuel. Includes orifices and instructions for safe fuel-type changeover installation.

Controls gas flow from valve to burner on gas ranges and stoves. Replace if damaged, clogged, or causing uneven flame distribution on cooktop burners.

Three-piece orifice spud kit for converting range burners between natural gas and propane. Replaces worn or incorrect spuds during fuel-type conversion.

Connects the gas supply line to your range's broil burner. Replace this fitting if it's cracked, corroded, stripped, or causing gas connection issues.

Orifice holder secures the gas orifice in your range burner assembly. Replace if cracked, broken, or missing to properly mount the orifice component.