Parts for Bosch WAS24460UC/23: Drum Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't agitate or spin? Drive motor powers drum rotation for washing and spinning cycles. Restores proper agitation and water extraction.

Washer won't spin or shows F:43/E:21 error? Worn motor brushes are the likely cause. This repair typically takes 15-30 minutes with basic tools.

Front drum motor mounting bushing for washers. Supports the drum shaft for smooth rotation. Replace if worn, cracked, or causing misalignment issues.

Replacement screw for washer assembly. Used to secure internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Is your washer not heating water properly or clothes coming out cold? This heating element heats water to the correct temperature for effective cleaning.

Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.

Suspension spring for washer drum support system. Attaches between tub and cabinet to absorb vibration. Replace if broken, stretched, or detached.

Washer not starting or displaying error codes? This sensor monitors cycle functions and signals the control board. Typically a 20-30 minute repair.

Replacement holder for your washer's detergent dispenser. Installs in the dispenser drawer housing. Replace if cracked, broken, or missing.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This mounting nut secures appliance components to their mating fasteners for stable operation. It replaces a missing or worn nut to stop looseness and restore correct alignment of assemblies. What it does:

• Fastens and secures components to threaded studs or bolts
• Prevents parts from shifting, vibrating, or coming loose during use
• Helps eliminate noise caused by loose assemblies
• Restores proper mechanical alignment when a nut is lost or damaged

• One mounting nut

• Disconnect power and water before accessing internal components
• Thread by hand first, then tighten securely; avoid overtightening or using excessive force
• Follow torque specs and procedures from the appliance service manual

Drive motor pulley for washers. Replace if worn, cracked, or causing belt slippage and noise. Confirm fitment with your washer's model number.

Washer tub seal prevents water leaks between the outer tub and transmission. Replace if you notice leaking during cycles. Verify fit with your model number.

Replacement rear tub assembly for your washer. This structural component houses the drum and bearings. Order a new one if your original is cracked or damaged.

The Fastener Ring is an OEM part for Bosch washing machines. It helps securely mount the door gasket in place, sealing in moisture and preventing leaks.

The fastener ring plays an important sealing role, firmly attaching the pliable door gasket that surrounds the washer door opening. This allows the gasket to function properly in preventing water from escaping during fill and wash cycles.

Symptoms of a faulty fastener ring include:

• Loose or detached door gasket
• Water leakage from around the washer door
• Extended or incomplete cycle times due to poor sealing
• Wet floors or surroundings after normal cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replace your washer's door boot gasket when you notice leaking, tears, or water pooling around the door. Confirm fit using your model number and revision.

This bearing set replaces the slide bearings in the dishwasher rack rails. It restores smooth, even rack movement and helps keep the rack aligned so loading and unloading is easier and the rack stays securely on the tracks. What it does:

• Guides and supports the rack as it slides on the rails
• Reduces friction for smoother, quieter rack travel
• Helps maintain proper rack alignment to prevent tilting or binding
• Common symptoms: rack is hard to slide, feels rough, pops off rails, or bearings are cracked/missing

• One manufacturer-packaged bearing set

• Disconnect power and water supply before servicing
• Pull the rack out; remove rail end caps/stops per your model's design
• Note orientation; remove worn bearings and snap the new set into the rail channels
• Reinstall end caps and verify the rack moves smoothly before running a cycle

The Fastening Ring is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.

A bad fastening ring can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.

Symptoms of a bad fastening ring include:

• Water leaks around the washer's door
• Excessive noise or vibration 
• Visible damage or deformation of the ring

Replace your worn-out or damaged fastening ring with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Single mounting screw for securing washer panels, brackets, and assemblies. Replace damaged, stripped, or missing screws to restore secure attachments.

Replacement holder for washer detergent dispenser. Secures dispenser components in place. Order a new holder if original is cracked or broken.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.