Parts for Bosch WAS24460UC/23: Pump Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

If detergent isn't dispensing properly or the cup is cracked, this washer dispenser tray restores proper detergent release during wash cycles.

Siphon device for washer dispenser systems. Replaces cracked, broken, or missing siphon components that affect detergent flow and dispensing.

Detergent dispenser insert for washers. Replaces cracked, broken, or missing inserts in the dispenser drawer. Direct fit replacement part.

Fix detergent leaks or residue buildup with this lower dispenser tray. Replaces cracked or warped trays for clean, reliable dispenser operation.

Replace a cracked or worn upper dispenser tray that's leaking detergent or not directing water properly. Restores proper fit and dispensing function.

Fix washer not filling or slow fill with this inlet hose. Stops leaks at connection points and restores proper water delivery. Direct-fit replacement.

The Valve is an OEM replacement part for Bosch clothes washers. It regulates water intake, determining volumes for specific cycles. Balanced flow conserves resources without sacrificing clean performance. 

Causes of a bad valve can include mineral deposits clogging internal pathways over time. Constant opening/closing stresses rubber seals and disrupts precision.

Symptoms of a bad valve include:

• Inconsistent or insufficient water levels between loads   
• Washer fills on small loads wasting water 
• Extended cycle times as valve struggles to meter H2O
• Leaks that seep from the valve body into internal components

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Seals the connection between your washer's supply hose and inlet fitting. Replace when flattened or damaged to stop drips and restore a watertight seal.

The Cold Water Inlet Hose is an OEM replacement part for Bosch washing machines. It serves as a flexible supply line that delivers cold water from an external plumbing source directly to the washer. This hose plays an important role in providing a balanced mix of hot and cold water flow into the unit.

Symptoms of a bad cold water inlet hose include:

• Fluctuations in water temperature during cycles  
• Issues with certain temperature settings like warm or cold not operating properly
• Visible cracking, kinking, or leaking along the hose body
• No water flow or pressure at the cold supply 

Causes of a failed cold water inlet hose can be mineral deposits clogging the line, natural wear and tear over time, or physical damage from crushing or abrasive surfaces compromising its integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.

Fix a washer that overfills or won't stop filling. This pressure chamber hose restores water-level sensing so your washer fills correctly every cycle.

Replacement drain hose for washers. Connects washer tub to household drain pipe. Replace if cracked, leaking, kinked, or damaged. Essential plumbing part.

Routes water between washer components. Replace if cracked, worn, or leaking to restore proper water flow and prevent leaks. Confirm fit with your model.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement mounting bracket holder that secures internal components in place. Install when original is cracked, broken, or missing to restore proper alignment.

Washer not filling properly or overfilling? The pressure chamber works with the water-level sensor to detect correct fill levels. Moderate DIY repair.

Replacement drain hose for your washer. Connects the washer tub to the drain outlet. Replace if cracked, leaking, kinked, or showing signs of wear.

Washer won't start or stops mid-cycle? This door lock assembly secures the door during operation, restoring proper locking and cycle completion.

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

If your washer won't drain or water pools in the drum, this drain pump forces water out through the hose. Moderate DIY repair, about 1 hour to replace.

Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.

Fix a washer that leaks or fills when off with a new valve magnet coil. This electromagnetic solenoid controls water flow during wash cycles.

Connects your washer to the household water supply. Replace if hose is cracked, leaking, worn, or damaged to prevent water damage and ensure proper fill.

Replaces cracked, broken, or missing washer outer housing cover panel. Protects internal components from dirt and moisture while finishing exterior.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.