Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Electrolux Switch

Best Seller
Electrolux Range Large Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001

Burner won't turn off or stuck on high? This surface element switch controls heat settings for large burners. Moderate DIY with panel removal.

This part fixes the following symptoms
  • Won't start
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You The front left element (8 inch) would stay hot on lower control settings.   Michael S. • West Seneca , NY • September 13, 2022

After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty. One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove... Read more

More
$37.95
Compare At:
$45.54
You Save:
$7.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Range Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436000

Burner stuck on high or won't heat? This surface element switch controls temperature for electric range burners. DIY repair in under 30 minutes.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Surface switches not operating properly; going from cool to very hot etc   Guy G. • Guthrie , OK • October 10, 2014

Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros. Read more

More
$58.95
Compare At:
$70.15
You Save:
$11.20

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Electric Range Surface Element Control Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238201

Burner won't turn off or stuck on high heat? This surface element control switch restores proper temperature control. Easy DIY repair in under an hour.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Burner would not turn down on high all the time   Mark M. • Hillsboro , OR • June 29, 2020

Replaced burner switch and all was working properly. Great customer service and part replacement. Read more

More
$76.95
Compare At:
$134.55
You Save:
$57.60

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Light/Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 216822900

The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes.

Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections.

Symptoms of a bad light/switch include:

  • The interior light fails to turn on when the door is opened
  • The light stays on when the door is closed, leading to potential overheating
  • An impact on the refrigerator’s temperature regulation due to the switch not signaling the door's closure

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Frigrdaire up right alarm beeping door ajar   Thelma L. • Zirconia , NC • January 08, 2016

REPLACED THE LIGHT/LAMP SWITCH. Read more

More
$58.95
Compare At:
$70.74
You Save:
$11.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Gas Range Spark Ignition Switch & Harness Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 316580615

Burner won't ignite or sparks intermittently? This spark ignition switch and harness assembly restores reliable ignition. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Range sparker wire harness replacement   Brian E. • Portland , OR • April 20, 2020

After watching Simon's helpful and well-presented video, I fixed this with my son. Everything went smoothly! We really loved Simon's, "Ok, time to cook now. No more excuses!" Read more

More
$73.73
Compare At:
$88.48
You Save:
$14.75

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Gas Range Igniter Switch Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 316580611

Fix burners that won't spark or click. This igniter switch assembly restores gas ignition. Moderate DIY repair with video guide available.

Do-It-Yourself Stories from Customers like You Yes   Willie C. • Baltimore , MD • January 25, 2019

Thanks, I’ follow the instructions on YouTube and my repairs was completed. Read more

More
$71.46
Compare At:
$85.04
You Save:
$13.58

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Refrigerator Dispenser Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 241689106

Fix a dispenser that won't stop running water or ice, or won't dispense at all. This switch controls water and ice flow. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Water dispensor would only work when you depressed the paddle then brought back to find the "sweet spot"   Joseph V. • Bargersville , IN • January 16, 2026

I had the original sensors in my Frigidaire, which were now about 18 years old. The water dispenser would work, but I would have to push in the lever and then draw it back until it found that "sweet spot." I finally got annoyed enough with the problem that I looked online. I almost purchased the dispenser actuator (the paddle), and glad I didn't because it was not the problem. Unless your lights are out, or it broke, the culprit will be these little dispenser switches which get pressed... Read more

More
$11.95
Compare At:
$14.10
You Save:
$2.15

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Washer Water Level Pressure Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762010

Fix a washer that won't fill, overfills, or shows E35 error code with this water level pressure switch. Moderate DIY repair takes about 1-2 hours.

Do-It-Yourself Stories from Customers like You E35   Michael B. • Mechanicsville , VA • September 13, 2016

Water valve not closing all the way. Water keep entering washer even with power cord unplugged. Parts I ordered fit perfect. Ordered on Thursday night , parts there Saturday. Great service and shipping. Thank Read more

More
$39.31
Compare At:
$60.39
You Save:
$21.08

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813601

The Door Switch is an OEM part for Frigidaire dryers. This part ensures that the dryer operates safely by only allowing the machine to run when the door is completely closed. Positioned typically at the door frame, the switch activates when the door is shut, signaling the control system that it's safe to begin the cycle.

Over time, door switches can wear out or become damaged, which can interfere with the normal operation of the dryer. 

Symptoms of a faulty Door Switch include:

  • The dryer not starting when the door is closed.
  • The dryer stopping unexpectedly, which might be due to a loose or faulty switch.
  • A lack of the usual "click" sound that indicates the door has latched properly, suggesting the switch isn’t engaging.
  • The dryer continuing to run when the door is opened, which poses a significant safety risk.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer will start, run for a few second, then turn off. No error codes   John M. • Waikoloa , HI • April 03, 2014

By reading the forums I first thought it may be the thermostat. I bypassed the thermostat wiring and the dryer still turned off after a few second of running. The second check was for the door switch. I couldn't find an explanation of how to bypass, so I just ordered a new one to try. It worked. Read more

More
$27.95
Compare At:
$33.26
You Save:
$5.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Electric Range Dual Element Infinite Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 318191023

If your dual burner stays on low and won't turn off, or the small element doesn't heat, this infinite switch may need replacing. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Large element was very erratic on temperature low/high.   Rodney C. • Lake Wales , FL • March 01, 2018

Replaced the infinite, dual, switch. Very good instructional video for Safety, removal * install. Read more

More
$50.43
Compare At:
$59.51
You Save:
$9.08

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Start Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700

The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.

Symptoms of a bad Start Switch include:

  • The dryer not starting when the switch is pressed
  • Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
  • The need to hold the switch in place to keep the dryer running
  • Unusual noises when the switch is pressed

Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.

Do-It-Yourself Stories from Customers like You Start switch knob broke off.   Jeff O. • Laurier , WA • March 07, 2018

I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$ easy peasy!! :-) Read more

More
$67.28
Compare At:
$80.06
You Save:
$12.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Dishwasher Pressure Sensor Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504077

Fix i20 or i30 error codes with this dishwasher pressure sensor. Monitors water pressure to prevent overfilling. Common DIY repair for continuous filling.

Do-It-Yourself Stories from Customers like You If yor fridgidaire dishwasher is showing an i30 error code do not assume there is a leak   Kenneth T. • Vineland , NJ • April 24, 2017

I had to pull and clean the pressure sensor switch four times in a year. Each time more gunk accumulated. When that happens the sensor does not close the water valve. The dishawsher keeps filling and the water comes out through the overfill port. The water then goes in the catch basin under the washer and floats the emergency switch. This cuts off the water but keeps the pump running just in case. Tripping the circuit breaker is only a temp fix. What happens is the water level may have... Read more

More
$81.95
Compare At:
$97.52
You Save:
$15.57

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Washer Pressure Sensor Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505436

Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.

Do-It-Yourself Stories from Customers like You Washer would not let hot or cold water in diagnostic tests. Allowed both hot and cold water in had 120v on 5vdc fill sensor.   Wayne K. • Stockbridge , MI • March 21, 2020

Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts. Read more

More
$57.95
Compare At:
$68.96
You Save:
$11.01

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Switch Rocker
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527842

The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.

You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.

Symptoms of a bad Range Switch Rocker include:

  • The switch not responding when pressed
  • Inconsistent or flickering performance of the heating elements
  • Physical damage or looseness in the switch
  • Intermittent operation or complete failure to activate the desired function

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The rocker switch for to adjust the size of the heating element for the stove broke as well as the rocker switch to adjust the oven light broke   Benjamin G. • West Sacramento , CA • January 07, 2017

I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once... Read more

More
$15.50
Compare At:
$18.60
You Save:
$3.10

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600

This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:

  • Detects door position and allows operation only when the door is fully closed
  • Interrupts operation when the door opens for safety
  • Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
  • Intermittent starts due to worn actuator or internal switch contacts
What's included:
  • 1 door switch
Install notes:
  • Disconnect power before servicing
  • Access the switch from the front or top panel; release mounting screws or tabs
  • Move wires to the new switch one at a time to maintain correct positions, then secure the switch
  • Test operation before reassembly

More
$51.95
Compare At:
$61.82
You Save:
$9.87

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electrolux Cooktop Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304526190

Burner not heating or stuck on? This surface element switch controls power to individual cooking elements. Moderate DIY repair requires lifting cooktop.

More
$68.30
Compare At:
$81.28
You Save:
$12.98

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Electrolux switch replacement parts are essential in keeping your appliance running smoothly and efficiently. Whether it's your washing machine, dryer, or any other major appliance, the right switch plays a crucial role in maintaining performance. These Electrolux parts ensure that your appliances continue to operate as intended, preventing downtime and the potential headaches of malfunctioning equipment.

The switches in your Electrolux appliance serve as critical control points, allowing you to manage functions with ease. High-quality Electrolux replacement parts, especially OEM options, provide a perfect fit and reliable compatibility. This means you get the same performance and peace of mind as when your appliance was brand new.

You can trust that finding the right Electrolux switch replacement part is straightforward, catering to almost any model and ensuring that your appliance is back to working order quickly. With these parts readily available, you can be confident in maintaining the longevity and efficiency of your Electrolux appliances.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store