Parts for Ge CGS990SET1SS: 01 - Gas & Burner Parts

Stainless steel cleaner for gas ranges and cooktops. Restores shine and removes fingerprints, smudges, and streaks from exterior surfaces.

Converts your gas range from natural gas to liquid propane operation. Includes orifices and components to adapt fuel delivery for LP gas use.

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

This circuit board mounting bracket secures an electronic board or module inside the appliance. It prevents movement, vibration damage, and wiring interference so the component stays correctly positioned for reliable operation.

• Mounts and supports a small circuit board or module within the chassis
• Maintains proper spacing and alignment to reduce chafing or electrical short risks
• Replace if bent, cracked, or missing tabs, or if it no longer holds the board securely
• Common signs include a loose/rattling board, visible bracket damage, or intermittent operation when the panel is bumped

• Disconnect power at the breaker; shut off gas supply if applicable
• Remove the necessary access panel(s) to reach the board and bracket; note orientation and wiring
• Transfer the board/module to the new bracket and reinstall using existing hardware
• Watch for sharp metal edges; route wires to avoid pinching and verify clearances before restoring power

Secures the cooktop to the range frame. Replace this bracket if it's bent, broken, or missing to restore proper alignment and eliminate rattling.

Fix uneven burner flames or gas flow issues with this range manifold pipe assembly. Distributes gas evenly to cooktop burners for consistent heating.

Fix improper flames or weak ignition on your range burner with this LP orifice spud. Meters propane flow for correct flame size and safe operation.

Fixes weak or uneven flames on LP gas ranges. This orifice spud meters propane flow to the burner. Easy DIY install restores proper flame size.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

Fix uneven flames or burner issues with this range orifice holder assembly. Connects gas line to burner for proper flow. Moderate DIY repair.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

If your range burner has weak or uneven flames, this orifice holder secures and aligns the gas orifice for proper flow and stable combustion.

Fix a right-rear burner that won't ignite or has an uneven flame with this orifice holder. Secures the gas orifice in the burner head assembly.

Protective shield that covers the oven igniter. Replace if cracked, broken, or missing to shield the igniter from spills, drips, and falling debris.

LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

Weak or uneven flames on LP gas? This range burner orifice spud meters propane flow for steady, consistent flames. Restores proper gas delivery.

Burner won't shut off or has weak flame? This top burner valve controls gas flow to restore proper ignition and flame adjustment on your range.

Fix a burner that won't light or shut off completely with this gas range top burner valve. Controls gas flow to restore reliable ignition. DIY repair.

Fix burners that won't light, stay lit, or shut off completely with this gas control valve. Regulates flow to a single burner for steady flames and safe cooking.

Delivers gas from the manifold to your range's top burner for reliable ignition and even flame. Replace when burners fail to light or heat unevenly. Verify fit with your model number.

If your gas range burners won't ignite or flame height is uneven, this valve control assembly routes gas and regulates flow to restore proper operation.

Fix an oven that won't light or heat with this igniter glow bar. Common repair for gas ovens that click but don't ignite. Simple 5-15 minute DIY fix.

Protective cover for your range thermostat. Replaces cracked, broken, or missing covers. Installs on the control panel to shield thermostat components.

The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.

Symptoms of a bad igniter:

• Burners not lighting
• Igniter sparking erratically

The causes of a bad part can include physical damage or wear and tear over time.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Oven won't reach set temperature or stays on continuously? This thermostat regulates oven temperature to restore accurate heating and consistent results.

Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.

Fix burners that won't light, inconsistent flames, or an oven that fails to heat. This gas valve control assembly regulates gas flow for safe ignition.

If your gas oven won't heat or ignite, the igniter may be broken or weak. This part glows to ignite gas. Moderate difficulty repair in 30-45 minutes.

Fix an overheating oven with this range limit thermostat. Stops heating when temperatures exceed safe limits. Straightforward repair for most DIYers.

Range oven not heating evenly or convection fan stopped working? This blower motor circulates air in the oven cavity for even cooking and baking results.

Gas leaking behind your range or burners won't shut off completely? The pressure regulator controls gas flow to safe levels. DIY-friendly repair.

This dual water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring normal water delivery when the original valve fails. Reliable replacement for disrupted water supply or intermittent dispensing. What it does:

• Directs water to the icemaker and dispenser via two separate inlet ports/solenoids
• Stops water flow when valves fail, causing no water or no ice production
• Can cause continuous water flow or leaks if a valve sticks
• Restores normal dispensing and ice-making when replaced

• Disconnect power and shut off the water supply before starting any repair
• Replace with matching orientation and secure mounting to avoid kinks in supply lines
• Verify connections and test for leaks after restoring power and water

Support bracket for range manifold panel assembly. Secures and stabilizes the control panel mounting. Replace if bent, broken, or damaged during repairs.