Parts for Ge CGS990SET1SS: 02 - Control Panel & Cooktop Parts

Burner control knob for gas ranges. Installs on the control panel to regulate cooktop temperature. Replace if cracked, broken, or worn from heat and use.

Manifold panel for gas ranges. Covers the manifold assembly behind the control knobs. Replace if cracked, damaged, or missing to restore appearance.

Replacement control knob assembly for range or stove. Installs on control panel to operate burners or oven settings. Needed when original is cracked, broken, faded, loose, or missing.

Size: 8 - 32 inch.

Replacement mounting screw that secures the thermostat assembly to your range cabinet. Replace if stripped, missing, or damaged during repair work.

Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.

Cast iron side grate for gas range burners. Supports cookware and distributes heat evenly. Replace when cracked, warped, rusted, or missing.

Cast iron center grate for gas cooktops. Replaces damaged, cracked, or missing mid grate to restore stable cookware support over the center burner.

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Secures cooktop panels, brackets, and components on your gas range. Replace missing, stripped, or damaged screws to eliminate rattles and restore alignment.

Covers and protects the indicator lamp opening on your range control panel. Replace when cracked, discolored, or missing to restore visibility. Confirm fit with your model number.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

The Vision Burner XL is an OEM part for GE ranges. It is a large burner designed to provide high heat output for tasks that require intense cooking temperatures, such as boiling large pots of water or rapid heating. This burner ensures efficient and powerful cooking performance.

Causes of a bad Vision Burner XL can include wear and tear from frequent use, exposure to high temperatures, or damage due to impact or spills. Electrical issues can also lead to malfunctioning.

Symptoms of a bad Vision Burner XL include:

• The burner not igniting
• Uneven flame or weak flame
• The burner not maintaining a steady flame
• Visible damage or corrosion on the burner

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tri-Ring Burner Assembly is an OEM part for GE gas cooktops and ranges. It contains the three front right burners, grates, and supporting brackets.

Causes of a bad burner assembly can include cracked or warped burner heads from prolonged heat exposure. Deterioration of internal gas pipes and orifices may also diminish flame and heating performance.

Symptoms of a bad Tri-Ring Assembly include:

• Unstable, yellowish, or excessively large flames that cannot be adjusted
• Burners that cannot be ignited or controlled independently
• Improper alignment causing imbalanced pans or spills
• Leakage or gas smells detected around the burner cavities

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore branded appliances.

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Outer burner cap for sealed gas cooktop burners. Shapes flame distribution around the outer ring. Replace if cracked, warped, or missing.

Central burner cap for gas cooktops. Covers the center of the burner to shape flame and protect the burner head. Replace if cracked, worn, or missing.

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

• Excessive noise
• Difficulty in sliding the drawer
• Misalignment
• Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Burner control knob for gas and dual fuel ranges. Installs on the control panel. Replace if knob is cracked, broken, won't turn properly, or missing.

This replacement cooktop griddle restores a flat, stable cooking surface over the designated burner(s) on your range. Replace a warped, cracked, or missing griddle to maintain proper fit, safe handling, and consistent results.

• Provides a level, wide cooking surface for griddling on the cooktop
• Rests on the cooktop supports over the appropriate burner(s)
• Replace if the original is warped, cracked, chipped, or will not sit flat
• Helps restore even contact with heat and stable placement

What's included: 1 griddle

• Allow the cooktop and griddle to cool completely; wear gloves when handling
• Remove grates or the old griddle and clean the support area before placement
• Position the griddle on the designated location; align feet/tabs so it sits flush and does not rock
• Verify stability before heating; follow your range's use and care manual

Decorative trim skirt that fits around range control knobs on the front panel. Replace if cracked, disintegrating, melted, or missing for a clean look.

Fix an unresponsive or cracked range control panel with this glass and touch board assembly. Restores touch controls and display feedback in one unit.