Need Help?
Call or text
Dryer won't heat on timed dry or runs continuously? The timer controls cycle duration and heat phases. Common DIY repair, takes 30-45 minutes to replace.
My husband took the panel off. Check different things. Talked to someone at Appliance Parts. He told him some things to test. It was the timer that needed replacing. So happy to have my dryer working again! :) Read more
If your dryer won't advance through cycles or runs continuously without shutting off, the timer assembly controls cycle progression and may need replacement.
I replace the old timer with the new one I purchased from appliance parts pros.com I removed the nuts from back of top console of the dryer. Removed the electrical prongs from the old timer and then replace with new timer than plug dryer in wall and started the dryer on timed cycle and the heating elements kicked in and my wife was smiling from ear to ear. Read more
Fix a dryer that won't advance or shut off with a new timer control. This part regulates drying cycles. Most DIYers complete this repair in 5-10 minutes.
Replaced, took 5 minutes to complete the exchange. Read more
Refrigerator not cooling or control panel blank? This electronic control board manages temperature, defrost cycles, and compressor operation. DIY repair.
A relay in my refrigerator would periodically click off, causing the compressor motor to stop and the LEDs on the front panel to turn off. This became more frequent until it finally "blanked out" permanently. No cooling, no lights on the front panel, no water or ice, only the inside lights worked. Isolating the problem to the control board was easy, and replacing the control board was very easy thanks to the videos and previous customer reports available here. After installing the board, I... Read more
Fix a dishwasher that won't start, stops mid-cycle, or has a blinking light panel. This control board regulates all wash cycles and functions.
Replaced control board. This did the trick! The dishwasher works great again. Read more
Oven won't heat but stovetop works? This control board regulates bake and broil elements, temperature settings, and timers. DIY-friendly, 10-30 minute fix.
Ordered part and son-in-law replaced the part within 10 minutes. We ordered the part on Monday and the next day the piece arrived via mail! so quick we could hardly believe it! Nice! Read more
Fridge warm but freezer cold? Frost buildup on coils? Your defrost timer may be failing. This control manages automatic defrost cycles. 15-min DIY fix.
I am not new to APP, fixed a tub belt on a Maytag dryer in the past. My frig started getting warm so I went onto to one of those "lists" sites and found a appliance repair place. The guys were great and came out right away. The tech said it was the cold control and $260 later my part was replaced, about 30 minutes. Great I thought until my frig started getting warm again. Those cold sensors on the beer bottles are a great indicator. Not wanting to spend another $260 I looked up on APP to see if... Read more
The Control Board is an OEM replacement part for Frigidaire refrigerators. This component serves as the brain of the appliance, managing and coordinating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. A functional control board ensures the refrigerator maintains optimal performance and energy efficiency.
Control boards can fail due to power surges, electrical issues, or normal wear over time. A malfunctioning board can disrupt the refrigerator's functionality and impact its ability to preserve food effectively.
Symptoms of a bad control board include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I watched YouTube videos for two days. I figured out it was the inverter board.I replaced the inverter board and it worked !!! I had to buy a meter to make sure the compressor was still good before I ordered the part. Read more
Fix a dryer that won't start, stops mid-cycle, or runs too long. Replacing a faulty timer is straightforward—snap in the new part after unplugging.
Replaced timer. It's a snap in place timer, once you remove the defective timer, overall pretty easy. Read more
The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment.
Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter.
Symptoms of a bad Noise Filter Assembly include:
This OEM LG part is also compatible with some Kenmore models.
Searched the web and determined it was something called a noise filter. Ordered the part from ApplianceParts Pros. Received it in about 3 days, normal shipping. Replaced the part. Took about 15 minutes from start to finish. Problem solved. Cost less than $50. Read more
Dryer won't shut off or advance through cycles? A faulty timer prevents automatic cycle progression. Moderate DIY repair restores timed operation.
Replaced timer, thermostat, a thermal fuse, the pair of thermal cutoff switches and finally the heater element. Hard to say what the final fix was that did the trick -- I am guessing it was the heater element although the old one appeared to have good continuity. All praise goes to the on line chat Pros Erica B and Robin C that took considerable amount of time and effort to help me decipher the problem. For that alone, Appliance Parts Pros will be my go to source for appliance parts for the... Read more
Fix a refrigerator that won't cool or has inconsistent temperatures with this inverter control board. Moderate DIY repair with step-by-step video guide.
Replaced the Inverter box Read more
If your washer won't advance cycles, stops mid-wash, or fills incorrectly, the control timer may be faulty. Moderate DIY repair, replaces defective timer.
Based on symptoms it looked like the timer was not working. I did a web search to confirm this and found your web site. Entering the model number of the washer (Whirlpool) I found the timer and related information. This confirmed my diagnosis. I also looked at the video on how to change the timer. This was invaluable! The video saved me hours and probably a washing machine. I ordered the timer, it arrived as promised, I installed it per directions and the machine works... the video makes... Read more
Fix blinking lights, won't start, or cycles not finishing? Replace your dishwasher's electronic control board. This 15-30 minute DIY repair can save $300.
We purchased the electronic control board (for 1/2 of what the technician wanted for the part), opened up the door to the dishwasher, took out the old board and put in the new one. It was a 15 minute repair and we saved almost $300 doing it ourselves! (Thanks to AppliancePartsPros.com and YouTube!) Read more
Freezer frosting up or refrigerator not cooling? The defrost timer controls the defrost cycle. DIY-friendly repair, typically 30 minutes to install.
Replaced the heater, timer, and wiring harness Read more
Dryer won't shut off or advance through cycles? A faulty timer prevents automatic shutoff and cycle progression. Moderate DIY repair restores normal operation.
I ordered a timer from Appliance Parts Pro, I watched the video on how to install it, I installed the timer and it works fantastic! I am now so glad that I can be busy and hear the buzzer go off to let me know that the clothes are now dry. Thank you so much Appliance Parts Pro! Read more