Kenmore / Sears Dryer Bracket & Flange

Complete idler pulley assembly with bracket, roller, and hardware. Replaces worn, squeaking, or damaged pulley components. Maintains belt tension.

Guides and secures the lint filter in place within your dryer. Replace if cracked, broken, or missing to properly hold the lint screen assembly.

The bearing retainer secures the drum bearing assembly in your dryer. Replace if cracked, broken, or worn to restore proper structural support.

Plastic bracket that holds the lint filter in place and also serves as the mounting point for the moisture sensor on some models. 8.1 inches long.

The Drum Bearing Bracket is an OEM replacement part for Frigidaire dryers. It holds and supports the drum bearing, which allows the dryer drum to spin smoothly during the tumbling and drying cycle.

Causes of failure can be cracking or breaking of the bracket over time due to constant use and stress. Improper installation that puts strain on the bracket may also lead to issues.

Symptoms of a bad drum bearing bracket include:

• Excessive vibration or shaking during operation
• Loud grinding or scraping noises
• The dryer drum not spinning properly or at all
• Premature wear of the drum bearing

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Secures the door hinge to the cabinet, preventing wobble and sagging. Replace if bent, stripped, or missing to restore proper door alignment and closure.

Structural bracket that secures the rear panel to the washer chassis. Replace if cracked, broken, or missing to restore proper alignment and cabinet stability.

Secure brackets and hardware for stacking a dryer on top of a front-load washer. Needed when vertically installing units to save floor space.

Securely mounts your dryer above your washer to save floor space. Includes brackets, adhesive pads, and hardware for safe installation. Replaces lost kits.

The Dryer Spring Plate is essential for maintaining the smooth operation of your Samsung dryer. This genuine OEM part is specifically designed to provide reliable support and stability, ensuring your dryer functions efficiently. Crafted from high-quality materials, the spring plate helps absorb vibrations and reduce noise during the drying process, enhancing the overall performance of your appliance. Installing the Dryer Spring Plate restores the proper alignment of your dryer's components, which can lead to longer appliance lifespan and fewer repair needs. Compatible with a wide range of Samsung dryer models, this spring plate guarantees a perfect fit and easy installation. By choosing this genuine OEM part, you can trust in the authenticity and durability that matches the original design of your dryer. Whether youGÇÖre replacing a worn-out spring plate or upgrading your dryerGÇÖs performance, the Dryer Spring Plate offers a dependable solution to keep your Samsung dryer running smoothly. Enhance your dryerGÇÖs functionality and enjoy the peace of mind that comes with using high-quality, manufacturer-approved components.

Base bracket that holds the leveling foot at the washer cabinet. Replace if cracked, broken, or missing to restore stability and prevent rocking or vibration.

This small structural bracket supports the "leg" of an interior shelf or drawer assembly in compatible refrigerators. It helps keep shelves level and stable so bins slide smoothly and contents stay secure during everyday use. What it does:

• Supports the corner/leg of an interior shelf, cover, or drawer rail
• Helps maintain level alignment and prevents wobble or sagging
• Restores stability if the original piece is cracked, warped, or missing
• Common symptoms: shelf or drawer sags, binds, or rattles; poor fit/alignment

• 1 supporter leg

• Disconnect power and remove food from the affected area before starting
• Remove the shelf/drawer and note fastener locations or locking tabs
• Transfer any reusable screws/clips and seat the new supporter fully
• Reinstall components, ensuring the shelf/drawer sits level and moves freely

A stacking kit that lets you securely mount a compatible dryer on top of a front-load washer to save floor space and improve stability. Designed for factory-specified stacking applications when used with approved appliance pairs. What it does:

• Provides the hardware and brackets needed to secure a dryer to a front-load washer and reduce shifting during use.
• Helps keep stacked appliances aligned for safer operation and less vibration-related movement.
• Intended for factory-approved stacking configurations—ensures the dryer stays fixed to the washer when installed per instructions.
• Can help maximize laundry room space by enabling safe vertical installation where compatible.

• Follow the appliance manufacturer's stacking instructions exactly; use the OEM procedure and supplied template if provided.
• Disconnect power and gas and empty both appliances before starting; wear appropriate safety gear.
• Installation may require two people and basic hand tools; the stacked unit is level and stable after installation.

Secures the leveling foot to the washer base. Replace if cracked, stripped, or missing to restore a solid mounting point for proper leveling and stability.

Secures the heater housing to the dryer cabinet. Replace if your bracket is bent, cracked, or missing to restore stable mounting and alignment.

This 38-inch stacking kit lets you securely mount a dryer on top of a matching washer to save floor space and stabilize the stacked units. It provides a tidy, secure connection for paired laundry appliances. What it does:

• Secures the dryer to the washer to reduce the risk of tipping or shifting during operation
• Keeps stacked appliances aligned for safer, more stable operation
• Helps minimize vibration transfer between machines for quieter performance
• Enables space-saving stacked installation in closets or compact laundry areas

• Follow the washer and dryer installation manuals and the kit instructions exactly for proper fit and safety
• Disconnect power and gas (if applicable) and empty both appliances before installing
• Installation may require two people and basic hand tools for safe handling of appliances