Parts for Husqvarna YTH2246-917289540: Mower Deck Parts

Deck spindle assembly that houses the blade mounting shaft on riding mowers. Bolts to the mower deck. Replace if housing is cracked, worn, or damaged.

Right hand mandrel cover for riding mowers and lawn tractors. Protects the mandrel assembly that rotates the mower blades. Replace if cracked or broken.

Protective mandrel cover for riding mower decks. Shields internal spindle components from debris. Replace if cracked, broken, or missing for safety.

Replacement suspension arm for lawn tractors and riding mowers. Installs to improve ride comfort. Replace if cracked, broken, or worn out.

Secures the mower blade to the spindle on riding mowers and tractors. Replace if bolt is stripped, washer is damaged, or hardware is missing.

46-inch mulching blade for riding mowers and lawn tractors. Replaces worn, bent, or damaged blades. Finely cuts grass clippings for decomposition.

This high lift blade is a type of lawnmower blade. Compared to other blades for mowers, its ends have deeper curves. This unique and distinct feature makes the blade more versatile. When you cut the grass, the deeper curved edges will eject the clippings to the bagger. A high lift blade features large wind wings that contribute to airflow. When there is an increase in air circulation, this means you can prevent grass from clogging and accumulating, especially when cutting wet and tall grass. Continuously using a high lift blade will dull its edges, which lowers its cutting efficiency. A broken or dull blade can result in unevenly cut grass. When this happens, a replacement blade should always be within reach. For a worry-free installation, be sure to have a wooden block and socket wrench. This original Husqvarna blade works with mower models from Ariens, Dixon, Craftsman, and Husqvarna. It will also work with other mowers with 46 decks. This brand-new high lift blade is sold-individually. Bolts and washers are sold separately.

Deck spindle assembly that houses the blade mounting shaft on riding mowers. Bolts to the mower deck. Replace if housing is cracked, worn, or damaged.

Deck spindle assembly that houses the blade mounting shaft on riding mowers. Bolts to the mower deck. Replace if housing is cracked, worn, or damaged.

Shoulder bolt that attaches the suspension arm to the wheel bracket on riding mowers and tractors. Replace if bolt is stripped, worn, or missing.

Torsion deflection spring for lawn tractors and riding mowers. Replaces worn, broken, or missing springs in the drive or control assembly.

Replacement discharge chute deflector for riding mower decks. Directs grass clippings away from the operator. Replace if cracked, broken, or missing.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Mandrel spacer washer for riding mowers and lawn tractors. Installs between drive pulleys to maintain proper alignment and spacing. Replace if worn or missing.

Metal mandrel pulley that mounts to the mower deck spindle and turns the cutting blades via belt drive. Replace if dented, warped, or damaged.

Replace a loose or missing flange nut that secures mower components. This top lock nut provides secure fastening for riding mower and tractor assemblies.

Idler pulley for riding mowers and tractors. Maintains proper belt tension for drive system. Replace if pulley is cracked, worn, or spinning rough.

Replace your lawn tractor's belt keeper to secure the drive belt and ensure safe operation. Install when damaged or worn to prevent belt slippage. Verify fit with your model number before ordering.

Torsion spring for lawn tractor brake system. Installs on brake assembly to provide tension. Replace if broken, stretched, or missing for proper brake operation.

Secures and stabilizes the torsion spring on your riding mower. Replace if cracked, broken, or missing to properly retain the spring assembly.

The idler arm is a genuine replacement part that is supplied from the manufacturer. This part is used on riding lawn mowers to help manage the shifting of the gears on the unit. The idler arm is attached to the mower housing and the belt guard and is used to engage the idle function. This durable metal arm is subject to repetitive motion and constant vibrations, which can cause it to crack or break over time. Impact damage could also occur. If the idler arm fails, the engine will not be able to work properly until it is replaced. A genuine OEM replacement like this part will resolve the issue. This OEM idler arm is manufactured by Husqvarna and can be used in select machines from Poulan, Husqvarna, Jonsered, and Weed Eater. The arm is sold as an individual part. Hardware and additional components will require an additional purchase. Replacing the idler arm will require a socket set and a screwdriver in most cases. It is a fairly simple job. Allow the engine to cool and work in a well-ventilated area when performing this repair.

Spacer retainer for lawn tractors and riding mowers. Maintains proper spacing between components. Replace if cracked, broken, or missing during maintenance.

Hex head screw for lawn tractors, riding mowers, and snowblowers. Replaces lost, stripped, or corroded fasteners in various assembly locations.

Replacement blade brake arm for lawn tractors. Installs on the brake assembly to control blade stopping. Needed when original arm is broken or detached.

The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.

Brake linkage for riding mowers and lawn tractors. Connects between the idler arm and brake arm assembly. Replace if bent, broken, or missing.

The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.

Blades won't engage or spin when activated? This clutch assembly connects drive shafts to control blade engagement on riding mowers. Moderate DIY repair.

Replacement bolt for lawn tractors, riding mowers, and walk-behind equipment. Secures components together. Replace if missing, stripped, or damaged.

Shoulder bolt secures the gauge wheel on riding mowers and tractors. Replace if worn, loose, or missing to properly mount the wheel roller assembly.

Gauge wheel for riding mowers and tractors. Mounts to the deck to maintain proper cutting height on uneven terrain. Replace if cracked or worn.

This left-hand engine belt keeper is designed to be a replacement for riding mowers and lawn tractors. The purpose of the belt keeper is to stabilize the belt. This will help to reduce the amount of friction on the belt. If this part is damaged or missing, it could cause problems with the belt including premature wear and tear. In some cases, the mower will not function properly.The part is made from durable metal, but there is still a chance that it could break or become worn and corroded over time. If the owner notices any signs of damage, the belt keeper should be replaced right away to ensure the mower continues to function properly.The engine belt keeper can be used for many models of machines from Husqvarna, Poulan, Weed Eater, and Jonsered. The high-quality metal replacement piece is sold individually. It is a genuine OEM part that has been sourced directly from the manufacturer.

Belt keeper guides tractor belts between pulleys to transfer power. Replace if broken, damaged, or belt slips off track. Confirm fit with model number.

Flat idler pulley for riding mowers and lawn tractors. Works with the belt to transfer power from engine to drive system. Replace if cracked or worn.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

Clutch control cable with spring for front-engine lawn tractors. Connects clutch pedal to transmission. Replace if cable is frayed, broken, or missing.

Threaded stud fastener for riding mowers and lawn tractors. Secures components together with threaded ends. Replace if stripped, broken, or missing.

Replacement screw for lawn tractors and riding mowers. Fastens components together and reduces vibration. Replace if lost, stripped, or damaged.

Center front baffle installs beneath the mower deck to direct airflow and grass clippings. Replace if your original baffle is cracked, broken, or missing.

Front right baffle for riding mowers and lawn tractors. Mounts in the mower deck to direct airflow for efficient cutting. Replace if cracked or damaged.

Deck washout port for riding mowers and tractors. Attaches to mower deck for easy cleaning with garden hose. Replace if cracked, broken, or missing.