Parts for Kitchenaid KDPM604KBS0: Pump, Washarm And Motor Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Fixes dirty water or food specks remaining after wash cycles. This check valve prevents backflow into the dishwasher sump. Moderately easy repair.

Replacement spray arm for your dishwasher. This rotating component distributes water throughout the wash cycle. Replace if cracked, broken, melted, or missing pieces.

Screens debris from entering the pump and wash arms. Replace if damaged, shredded, or causing poor drainage. Verify fit with your model number.

Precision ring that positions and secures internal dishwasher components. Replace when worn, cracked, or missing to restore proper fit and alignment.

Mounting bracket that secures and stabilizes internal dishwasher components. Replace when original support is cracked, bent, or missing to restore alignment.

Fix uneven drying or excess noise caused by poor air circulation. This dishwasher airflow diffuser restores proper air distribution for consistent performance.

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Water leaks around the hose connection points
• The hose slipping off the fitting
• Visible rust or wear on the clamp
• Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Dishwasher overheating or shutting off mid-cycle? This high limit thermostat monitors temperature to prevent damage. Fixes common heating issues.

The Drain Hose is an OEM part for Whirlpool dishwashers. It channels water out of the dishwasher tub and into the garbage disposal or drain after each cycle. This drain hose is specifically designed to withstand frequent temperature fluctuations and mineral deposits without compromising its integrity over time.

Causes of a bad Drain Hose can include mineral buildup inside the hose restricting flow, cracks developing from repeated flexing during drain cycles, or cuts or abrasions from rough handling or sharp surfaces.

Symptoms of a bad Drain Hose include:

• Water not draining properly or draining slowly after cycles
• Puddles or leaks found near or under the dishwasher
• Musty smells from standing water inside or around the unit
• Possible flooded floors near the dishwasher area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Clip is an OEM part for Whirlpool dishwashers. It securely attaches the drain hose in place, directing wastewater out of the dishwasher during drain cycles.

Causes of a bad clip can be cracks, breaks, or deformations causing weakened grip. Normal wear and repeated drain cycles can also damage the clip over time.

Symptoms of a bad drain hose clip include:

• Water or leaks around the base of the dishwasher
• Puddles forming due to the hose slipping out of place
• Improper drainage if the hose is not positioned correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.

Secures hoses to fittings and prevents leaks in your dishwasher. Replace when connections loosen or water escapes. Confirm fit with your model number.

Traps food particles and debris to prevent drain clogs and maintain optimal water circulation. Replace when cleaning no longer restores performance. Confirm fit with your model number.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Leaking under your dishwasher or water pooling after cycles? The sump assembly houses the motor and pump. Requires disassembly; check hoses first.

Dishwasher motor hums but won't start? This capacitor provides the phase shift needed for your circulation motor to run. Easy 15-minute repair.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.