Jerry December 29, 2015 for Model Number LSC26905TT Freezer fan was making noise so I took it apart and it was hitting ice. There was ice behind the false panel so I defrosted all of it. Fan worked good for two days then started again. I haven't taken it apart yet but there appears to be ice behind the panel and down the back of the freezer again. The ice maker is working fine and doesn't appear to be leaking, the ice is behind the panel. Could the hose running to the ice maker be leaking?
1 Answer Hello Jerry. You will need to locate the source of the ice. Look for leaks and check door seals. Also, make sure you do not have a defrost issue. Read More...
Malhavok November 08, 2015 for Model Number FGUS2632LP2 Equipment making ice well...problem is its dumping the ice down the back of the unit...what could cause this? Thanks for the help...
2 Answers Malhovak, For this issue, the icemaker arm is not shutting the icemaker off when it is full so it causes the ice to fall out of the back. You will want to install the icemaker extension 218513800 for this issue. Read More...
Malhavok November 08, 2015 for Model Number FGUS2632LP2 Equipment making ice well...problem is its dumping the ice down the back of the unit...what could cause this? Thanks for the help...
2 Answers Malhovak, For this issue, the icemaker arm is not shutting the icemaker off when it is full so it causes the ice to fall out of the back. You will want to install the icemaker extension 218513800 for this issue. Read More...
Andrew October 27, 2015 for Model Number Lmx28983st My ice maker won't dump ice into the bucket. It fills and freezes the cube tray fine, but won't dump into hopper. I turn the ice maker on and off, and immediately the ejector starts turning and it jets one row of ice. A couple of hours pass, and again, ice is ready, but won't dump on its own. Another power cycle causes another dumping. There are no obstructions as far as I can see. The hopper full sensor bar/arm seems to be in its normal position and moves freely when moved by hand, no odd noises from the gears, or fill valves, can't figure it out.
1 Answer Hello Andrew, This sounds like the cycling thermostat is not doing its' job. Parts of this icemaker are not available individually so you would need to replace the icemaker assembly AEQ36756901. Read More...
D September 30, 2015 for Model Number lsc27925st Ice maker freezes water in the tray, but will not dump. Capacity arm seams to be stuck in the up position. Can't move it by hand. Is the ice maker bad?
1 Answer Hello D. Yes, based on the information you provided, it sounds like the icemaker is bad and will need to be replaced. Make sure the temp in the freezer is 0 to 5°. Read More...
Eric September 24, 2015 for Model Number LG-LSC27925ST I have an refrigerator LG-LSC27925ST and the problem is the ice-maker makes ice OK but when I press the button to get some ice the door won't open to allow the ice to drop on the cup. The ice get stuck on the door since the flap or door did not allow the ice to go through. I maybe thinking could be some kind of solenoid. Your advice would be appreciated.
1 Answer Hello Eric. It sounds like the dispenser motor EAU59551204 is bad and will need to be replaced on the unit. Read More...
Janie September 05, 2015 for Model Number LSC26905sw Hello, My LG ice maker works fine but water seems to be leaking somewhere on the left side of the tray because it ices up on the left freezer wall and inside of the ice bin. Every few weeks apparently water trickles into the fan motor and it starts to freeze up and makes a loud clacking noise. If we leave the freezer open for about a half an hour it thaws, and is good to go again. A while back there was a thin plastic piece that attached to the 2 bottom holes in the ice tray but it broke and I could not re-attach it. The icemaker seemed to work fine, but then this problem started. Im not sure whether that helped level the tray but can't seem to figure out what that part was. Please tell me what that part was if thats what is needed or if it's something more that is wrong. Thank you, Janie
1 Answer Janie, It sounds like the piece that fell off was a thermistor holder. There is a thermistor that is on the bottom of the icemaker that allows it to cycle. If the icemaker is tilting then it is warped and would need to have the icemaker replaced. The part number for the icemaker is 5989JA1005D. Read More...
Mark August 07, 2015 for Model Number not sure I have an LG side by side refrigerator/freezer. There is a leak in the freezer which causes the whole freezer to ice up. What might be the problem?
1 Answer Mark, This issue would most likely be caused by a drain in the freezer that is clogged. You will want to remove the rear panel and clean out any ice in the drain trough. Once that is cleaned out you will want to flush the drain with hot water to get it flowing again. Read More...
Ron August 04, 2015 for Model Number LG lsc27925st My ice maker makes ice but will not drop out of the trays when the tray turns over the cubes stay in the trays and then it trys to fill them up agin and the water just runs in to the lower part of the freezer.
1 Answer Hello Ron. The icemaker 5989JA1005H is bad and will need to be replaced in the unit. Read More...
John July 30, 2015 for Model Number Lg Replace my ice maker but it is still spilling water over into the freezer.
1 Answer Hello John. If the icemaker is new and is level, you will need to order and replace the water valve on the unit. Read More...