Range / Cooktop / Oven Gas Conv Kit Parts
Genuine Bosch part
By: Bosch
Part Number: 00415498
Jet holder securely houses the orifice assembly on gas range burners. Replace if cracked, corroded, or heat-damaged. Ensures proper gas flow and ignition.
Do-It-Yourself Stories from Customers like You
Left rear variable simmer gas burner on thermador prg364glus stopped working David B. • Lincoln , NE • February 23, 2017
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 316536610
This surface burner ignitor/orifice assembly directs gas through a calibrated orifice and provides the spark to ignite it. Replacing a worn or damaged assembly restores consistent lighting and an even flame on the affected rangetop burner.
- Routes gas from the valve through the orifice to the burner head
- Positions the ignitor for reliable sparking and quick ignition
- Helps maintain correct flame size and pattern on that burner
- Common symptoms: burner won't light, clicks without flame, delayed ignition, weak or uneven flame
What's included: One ignitor/orifice assembly. Install notes:
- Disconnect power and shut off the gas supply before servicing
- Remove grates, caps, and burner heads; lift the cooktop to access the assemblies
- Note wire routing and original orifice location; transfer any reusable hardware from the old part
- After installation, restore gas and check connections for leaks, then test spark and flame
Also known as: Orifice holder with ignitor; surface burner igniter/orifice assembly.
Do-It-Yourself Stories from Customers like You
No flame at rear burner. Chris M. • Gladstone , NJ • February 03, 2023
I replaced the Ignitor/Orifice Tube assembly.
Read more
More
$81.95
- Compare At:
-
$98.34
- You Save:
-
$16.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 316527511
Burner orifice regulates gas flow to your range burners. Replace if clogged with debris, corroded, or damaged to restore proper combustion and heat output.
Do-It-Yourself Stories from Customers like You
The orafices were set up for propane and i needed them for nutural gas Arnold M. • Belen , NM • December 14, 2015
Found the parts I needed ordered them from your site
Received them and installed in a few minuets and was done
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Whirlpool part
By: Whirlpool
Part Number: MAL9000AXX
The LP Gas Conversion Kit is an OEM part for Whirlpool appliances. This kit allows for the conversion of natural gas appliances to use liquid propane (LP) gas. It includes all necessary components, such as orifices and instructions, to ensure a safe and efficient conversion.
Over time or due to specific needs, you might need to convert your appliance from natural gas to LP gas. Causes for needing this conversion include moving to an area where only LP gas is available or preferring LP gas due to its efficiency and environmental benefits.
Symptoms indicating the need for a gas conversion kit include:
- Moving to a location that only supplies LP gas
- Changing energy preferences for better efficiency
- Appliances set up for natural gas needing adaptation to LP gas
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
I changed my dryer from ng to lp Dave F. • Kimbolton , OH • June 06, 2015
The kit was very simple it took longer to take the dryer apart than it did to do the change over and it works great thank you for you're product
Read more
More
$49.51
- Compare At:
-
$58.92
- You Save:
-
$9.41
Genuine Ge part
By: Ge
Part Number: WB28X39141
LP conversion kit for gas ranges. Includes burner orifices to convert your range from natural gas to LP propane. Replace missing or lost conversion parts.
Do-It-Yourself Stories from Customers like You
No LP kit when I bought the stove. Chuck L. • Minersville , UT • April 15, 2023
Received the kit 1 day early , installed jets , and everything works perfectly!!! Thanks
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 316272000
Replaces the burner igniter electrode and orifice holder assembly on gas range cooktops. Needed when the original is cracked, corroded, or broken.
Do-It-Yourself Stories from Customers like You
Slow to ignite Matthew F. • East Peoria , IL • October 07, 2019
It took a little longer then I was hoping but wasn’t terrible. If the burner is very old at all make sure to get the new screws. Both of mine snapped when trying to remove them. The new one works great.
Read more
More
$130.74
- Compare At:
-
$156.89
- You Save:
-
$26.15
Genuine Ge part
By: Ge
Part Number: WB28K10188
Holds the orifice that regulates gas flow to the rear burner on your gas range. Replace if cracked, corroded, or damaged from regular use or wear.
Do-It-Yourself Stories from Customers like You
It started out like usual an easy project ! stove needed leveling the top was always spongy (do to original install not correct ) John B. • Georgetown , IN • March 26, 2020
Once I watched the video on your site about gas line install, it became apparent why the line bent when I raised the lid.. also discovered those two rods have nest to go into and the lid/top now sets down tight as designed ( and as an added bonus, gas smell disappeared during oven use)
I ordered the gas lines with the model number, ordered all four …. it was a bit of a chore one came up when site opened I picked it, but did not know if it was the RH or LH etc.. so reading some of your answers...
Read more
More
$25.95
- Compare At:
-
$30.62
- You Save:
-
$4.67
Genuine Frigidaire part
By: Frigidaire
Part Number: 316536614
The Igniter and Orifice Assembly is an OEM part for Frigidaire ranges. This part ignites the gas burners and regulates the flow of gas through the orifices.
Causes of a bad Igniter and Orifice Assembly can range from electrical issues or corrosion affecting the igniter to clogs or obstructions in the gas orifices.
Symptoms of a faulty Igniter and Orifice Assembly include:
- Difficulty igniting or relighting burners
- Uneven or inconsistent flame patterns
- Burners not staying lit or extinguishing spontaneously
- Clicking or sparking noises during ignition attempts
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Front burner electrodes would not ignite the burners Joel D. • O Brien , OR • August 05, 2018
Ordered and replaced the front burner electrodes and orifices. I had to swap out the orifices because the new ones came with natural gas orifices and my stove uses propane.
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Ge part
By: Ge
Part Number: WB28K10031
LP gas burner orifice spud for gas ranges and cooktops. Needed when converting fuel type or replacing a cracked, missing, or incorrect size orifice spud.
Do-It-Yourself Stories from Customers like You
Incorrect orifice spuds:lp gas spuds needed not existing street gas spuds flame too high Lisa M. • Huntington , NY • May 10, 2015
AppliancePartsPros identified problem and needed parts. Repairman installed new spuds.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Ge part
By: Ge
Part Number: WB28K10023
Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.
Do-It-Yourself Stories from Customers like You
Missing propane orifice for my cook top Eric A. • Addison , NY • January 08, 2018
I bought a new orifice and installed it.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Ge part
By: Ge
Part Number: WB28K10032
Burner orifice spud for gas ranges. Controls gas flow to each burner. Replace if cracked, clogged, or when converting between LP and natural gas.
Do-It-Yourself Stories from Customers like You
Had to re jet stove and oven from natural gas to liquid propane the service people were very helpful and always are I have used this company for a long time and will continue to heplful George D. • Sanbornville , NH • July 01, 2018
Myself
Read more
More
$27.50
- Compare At:
-
$32.73
- You Save:
-
$5.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 316527509
Meters gas flow to your range or cooktop burner for proper flame size. Replace worn, clogged, or missing orifices or when converting between propane and natural gas.
Do-It-Yourself Stories from Customers like You
The orafices were set up for propane and i needed them for nutural gas Arnold M. • Belen , NM • December 14, 2015
Found the parts I needed ordered them from your site
Received them and installed in a few minuets and was done
Read more
More
$28.95
- Compare At:
-
$34.16
- You Save:
-
$5.21
Genuine Ge part
By: Ge
Part Number: WB28K10215
LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.
Do-It-Yourself Stories from Customers like You
Incorrect orifice spuds:lp gas spuds needed not existing street gas spuds flame too high Lisa M. • Huntington , NY • May 10, 2015
AppliancePartsPros identified problem and needed parts. Repairman installed new spuds.
Read more
More
$20.62
- Compare At:
-
$24.74
- You Save:
-
$4.12
Genuine Ge part
By: Ge
Part Number: WB28K10556
Converts your gas range from natural gas to liquid propane operation. Includes orifices and components to reconfigure burners for LP fuel compatibility.
Do-It-Yourself Stories from Customers like You
Need to convert my stove to LP. Angel M. • Hemet , CA • April 04, 2021
The repair went well, now we don't need a lighter.
Read more
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Ge part
By: Ge
Part Number: WB28K10187
Orifice holder that mounts under the cooktop to route gas to the rear burner. Replace if cracked, damaged, or when converting between natural gas and LP.
Do-It-Yourself Stories from Customers like You
Smell of gas when gas turned on and one burner would not light Michael P. • Pittsburgh , PA • January 19, 2019
Replaced all gas lines (orifices), electrodes, and the spark module. Now, works like a charm. Not a hard fix at all. First time doing repair, so I took my time.
Read more
More
$29.27
- Compare At:
-
$34.83
- You Save:
-
$5.56
Genuine Ge part
By: Ge
Part Number: WB28K10192
Meters gas flow to your range's surface burner for proper flame size. Replace if the original orifice is clogged, damaged, or missing to restore correct burner performance.
Do-It-Yourself Stories from Customers like You
It started out like usual an easy project ! stove needed leveling the top was always spongy (do to original install not correct ) John B. • Georgetown , IN • March 26, 2020
Once I watched the video on your site about gas line install, it became apparent why the line bent when I raised the lid.. also discovered those two rods have nest to go into and the lid/top now sets down tight as designed ( and as an added bonus, gas smell disappeared during oven use)
I ordered the gas lines with the model number, ordered all four …. it was a bit of a chore one came up when site opened I picked it, but did not know if it was the RH or LH etc.. so reading some of your answers...
Read more
More
$26.33
- Compare At:
-
$31.33
- You Save:
-
$5.00