Parts for Maytag MFI2269VEW2: 03 - Shelf Parts

Replace your refrigerator water filter every 6 months to ensure clean, fresh-tasting water and ice. Easy twist-on installation. Verify fit with your model.

Replacement glass shelf for bottom-mount refrigerators. Installs in existing shelf tracks above or below crisper drawers. Replace when cracked, chipped, or missing.

Replaces broken or missing edge trim on refrigerator storage drawer pans. Restores clean appearance and proper fit so the bin seats correctly in the frame.

Right-side crisper cover support mounts to the inner wall and holds up the crisper cover and glass. Replace if cracked, broken, or missing to restore level.

Left-hand crisper support mounts inside your refrigerator to hold the crisper shelf and guide the drawer. Replace when cracked, broken, or worn for stability.

Replacement door frame trim that covers the door opening edge. Install when original trim is cracked, chipped, scratched, or missing to restore appearance.

Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.

Housing cover for refrigerators. Protects internal components and provides structural support. Replace if cracked, broken, or missing for proper fit.

Glass shelf for bottom-mount refrigerators. Replaces broken, cracked, or shattered shelves. Direct fit replacement for interior food storage.

This slide is the replacement guide that lets an oven or warming drawer open and close smoothly, restoring proper support and alignment for the drawer. Durable, low-profile fit that helps reduce sticking and uneven movement. What it does:

• Guides and supports the oven/warmer drawer during use for smooth sliding action
• Helps prevent the drawer from binding, catching, or coming off the track
• Reduces noise and uneven movement caused by worn or damaged guides
• Restores correct alignment so the drawer closes flush and operates reliably

• Disconnect power to the appliance before beginning any repair
• Remove the drawer per the appliance service instructions to access the existing slide
• Compare the new slide to the old part for proper orientation before installing
• Tighten fasteners securely and test drawer operation; do not force components

Replacement slide rail for refrigerator pantry or deli drawers. Installs on drawer side to enable smooth gliding. Needed when rail is bent, broken, or cracked.

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

The Endcap Kit is an OEM part for Whirlpool refrigerators. This kit is crucial for supporting the shelves, providing a polished look and helping to secure the shelf edges in place. Designed specifically for Whirlpool models, this part plays a key role in the overall functionality and aesthetic appeal of the refrigerator's interior.

The causes for these issues often stem from normal wear and tear, accidental damage during cleaning or adjustment, or improper installation. Ensuring that the Endcap Kit is intact and properly installed is essential for maintaining the structural integrity of your refrigerator shelves and preventing potential injuries or damage to items stored on them.

Symptoms of a malfunctioning Endcap Kit include:

• Loose or unstable shelves
• Difficulty in adjusting or securing shelves to the desired height
• Broken or missing endcap pieces, leading to sharp, exposed edges

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Endcap Kit is an OEM part for Whirlpool refrigerators. This kit is crucial for supporting the shelves, providing a polished look and helping to secure the shelf edges in place. Designed specifically for Whirlpool models, this part plays a key role in the overall functionality and aesthetic appeal of the refrigerator's interior.

The causes for these issues often stem from normal wear and tear, accidental damage during cleaning or adjustment, or improper installation. Ensuring that the Endcap Kit is intact and properly installed is essential for maintaining the structural integrity of your refrigerator shelves and preventing potential injuries or damage to items stored on them.

Symptoms of a malfunctioning Endcap Kit include:

• Loose or unstable shelves
• Difficulty in adjusting or securing shelves to the desired height
• Broken or missing endcap pieces, leading to sharp, exposed edges

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replacement crisper pan for bottom-mount refrigerators. Stores fruits and vegetables in the fresh food compartment. Replace if cracked, broken, or missing.

Support brace that stabilizes the crisper drawer shelf in your refrigerator's fresh food section. Replace if cracked, broken, or missing to keep drawers aligned.

Refrigerator shelf support ladder that secures and stabilizes shelving inside the compartment. Replace if cracked, broken, or missing to restore proper shelf support.

Replaces the cracked or broken front face of your refrigerator crisper bin. Restores the front wall and handle for smooth drawer operation and alignment.

Replacement glass shelf that sits above the crisper drawers in your refrigerator. Replace if cracked, shattered, broken, or missing for a complete look.

Shelf support ladder for refrigerators. Installs on interior walls to hold shelves in place. Replace if cracked, broken, or missing for proper support.

Shelf support ladder for refrigerator compartments. Installs on interior side walls to hold and guide adjustable shelves. Replace if cracked or broken.

Replacement mounting screw for refrigerators, ranges, and other appliances. Replaces lost, stripped, or damaged screws during repairs or maintenance.

Replacement mounting screw for refrigerators, ranges, and other appliances. Replaces lost, stripped, or damaged screws during repairs or maintenance.

Humidity control slide for refrigerator crisper drawers. Replace this plastic slide if the lever tab has snapped off, cracked, or broken during use.

Replacement support rod for refrigerator shelves and components. Secures and aligns parts that shift or sag. Order when your rod is bent, broken, or missing.

Replacement utility pan for refrigerator storage compartments. Restores organization when original is cracked, broken, stained, or missing.

Control knob broken, cracked, or won't turn? This replacement knob restores precise temperature and setting adjustments. Clips into place in minutes.

Center support rail that guides and stabilizes crisper drawers as they slide. Replace if cracked, broken, or missing tabs prevent smooth drawer operation.

Decorative trim panel that covers and protects the appliance edge. Replace if your original trim is cracked, broken, or missing to restore appearance.

Fix a sagging or loose refrigerator shelf with this left-side hook. Restores proper support and alignment for crisper and glass shelves. Easy DIY fix.

Replacement divider that separates sections inside a refrigerator bin or drawer to keep contents organized. Restores proper fit if your original is cracked, broken, or missing.

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

• Fastens covers, trims, brackets, and internal parts to the cabinet/frame
• Used wherever a #8-18 x 5/8 screw is specified
• Replace if the original is missing, corroded, stripped, or will not tighten
• Symptoms: loose or rattling panels, gaps, or hardware that backs out

• Disconnect power; shut off gas/water before servicing
• Match thread and length; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly—do not overtighten
• Inspect and replace damaged clips or tabs before securing